On Sat, 2003-04-12 at 19:54, Matthew T. O'Connor wrote:
> Hey, I have RH9 installed and it locks up a few minutes after boot. The
> last entries in the messages log is this:
>
> Apr 13 00:30:17 zeutrh9 kernel: scsi : aborting command due to timeout :
> pid 19002, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
> Apr 13 00:30:17 zeutrh9 kernel: hdd: irq timeout: status=0xff { Busy }
> Apr 13 00:30:17 zeutrh9 kernel: hdd: ATAPI reset complete
> Apr 13 00:30:17 zeutrh9 kernel: hdd: irq timeout: status=0x80 { Busy }
> Apr 13 00:30:17 zeutrh9 kernel: hdd: ATAPI reset complete
>
> Redhat8 is also installed on this PC and runs without any problems. I
> also ran both of the Phoebe betas, and they didn't lockup either. I
> tried booting with ide=nodma and it didn't help. I also tried
> disableing dma using hdparm and that didn't help either.
>
> any ideas? I would really like to have RH9 up and running.
>
>
If hdd is a burner, try booting without "hdd=ide-scsi" in your kernel
options. I suspect this will prevent the lockups.
Are we seeing a pattern of ide-scsi problems in Shrike? I just noticed
that cdrecord seems completely unable to burn CD's in 2.4.20-9 while it
worked during Phoebe2 and Phoebe3. Will do more testing at home
tomorrow...
Warren Togami
warren@xxxxxxxxxx
