On Sun, 2003-04-13 at 05:28, Warren Togami wrote:
> On Sat, 2003-04-12 at 19:54, Matthew T. O'Connor wrote:
> > Hey, I have RH9 installed and it locks up a few minutes after boot. The
> > last entries in the messages log is this:
> >
> > Apr 13 00:30:17 zeutrh9 kernel: scsi : aborting command due to timeout :
> > pid 19002, scsi0, channel 0, id 0, lun 0 Request Sense 00 00 00 40 00
> > Apr 13 00:30:17 zeutrh9 kernel: hdd: irq timeout: status=0xff { Busy }
> > Apr 13 00:30:17 zeutrh9 kernel: hdd: ATAPI reset complete
> > Apr 13 00:30:17 zeutrh9 kernel: hdd: irq timeout: status=0x80 { Busy }
> > Apr 13 00:30:17 zeutrh9 kernel: hdd: ATAPI reset complete
> >
> > Redhat8 is also installed on this PC and runs without any problems. I
> > also ran both of the Phoebe betas, and they didn't lockup either. I
> > tried booting with ide=nodma and it didn't help. I also tried
> > disableing dma using hdparm and that didn't help either.
> >
> > any ideas? I would really like to have RH9 up and running.
>
> Is hdd a CD burner?
That looks like that is the case. I had the same thing happening (also
have a burner), except I was running the nVidia binary module (from
nvidia). So I switched my config file back to using the nv driver and
so far that seems to be working.
Wonder if he/she is having the same problem?
--
Mike Chambers
Madisonville, KY
"Hand over the code, and no one gets hurt!"
