Re: CD Burning with SMP Kernel?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I wrote about this almost two months ago, but really didn't get any
responses.  I figure now that Psyche has had some time to breath, others
might have seen this problem too.  I'm still getting this error.  I've
tried both gcombust and xcdroast.  Anyone?  Maybe LKML would be more
appropriate forum for this question?

Thanks,
pete

On Thu, 03 Oct 2002, Pete Toscano wrote:

> I've been trying to burn CDs on my SMP Dell Precision 530.  I've swapped
> out CDRW drives (SCSI Plexwriter 12/10/32), cables, and cards
> (aic7xxx-based Adaptec card).  Nothing seems to work but using the UP
> kernel and ratcheting down the burn speed to 8 or lower.  (I'm using
> normally reliable imation 32x blanks.)  If I just ratchet down the burn
> speet to even 2 with the SMP kernel, I still get errors (below).  Is
> there anything I can do to burn and use both CPUs?
> 
> Thanks,
> pete
> 
> Oct  3 14:57:15 tesla kernel: scsi1:0:4:0: Attempting to queue an ABORT message
> Oct  3 14:57:15 tesla kernel: scsi1: Dumping Card State while idle, at SEQADDR 0x160
> Oct  3 14:57:15 tesla kernel: ACCUM = 0x2, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
> Oct  3 14:57:15 tesla kernel: HCNT = 0x0 SCBPTR = 0x0
> Oct  3 14:57:15 tesla kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
> Oct  3 14:57:15 tesla kernel:  DFCNTRL = 0x4, DFSTATUS = 0x6d
> Oct  3 14:57:15 tesla kernel: LASTPHASE = 0x1, SCSISIGI = 0xb6, SXFRCTL0 = 0xa8
> Oct  3 14:57:15 tesla kernel: SSTAT0 = 0x7, SSTAT1 = 0x13
> Oct  3 14:57:15 tesla kernel: STACK == 0x37, 0x37, 0x15a, 0x19b
> Oct  3 14:57:15 tesla kernel: SCB count = 4
> Oct  3 14:57:15 tesla kernel: Kernel NEXTQSCB = 3
> Oct  3 14:57:15 tesla kernel: Card NEXTQSCB = 3
> Oct  3 14:57:15 tesla kernel: QINFIFO entries:
> Oct  3 14:57:15 tesla kernel: Waiting Queue entries:
> Oct  3 14:57:15 tesla kernel: Disconnected Queue entries:
> Oct  3 14:57:15 tesla kernel: QOUTFIFO entries:
> Oct  3 14:57:15 tesla kernel: Sequencer Free SCB List: 1 2
> Oct  3 14:57:15 tesla kernel: Sequencer SCB Info: 0(c 0x48, s 0x47, l 0, t 0x2) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff)
> Oct  3 14:57:15 tesla kernel: Pending list: 2(c 0x48, s 0x47, l 0)
> Oct  3 14:57:15 tesla kernel: Kernel Free SCB list: 1 0
> Oct  3 14:57:15 tesla kernel: Untagged Q(4): 2
> Oct  3 14:57:15 tesla kernel: DevQ(0:4:0): 0 waiting
> Oct  3 14:57:15 tesla kernel: scsi1:0:4:0: Unable to deliver message
> Oct  3 14:57:15 tesla kernel: aic7xxx_abort returns 0x2003
> Oct  3 14:57:15 tesla kernel: scsi1:0:4:0: Attempting to queue a TARGET RESET message
> Oct  3 14:57:15 tesla kernel: scsi1: Dumping Card State in Command phase, at SEQADDR 0x160
> Oct  3 14:57:15 tesla kernel: ACCUM = 0x80, SINDEX = 0xac, DINDEX = 0xc0, ARG_2 = 0x0
> Oct  3 14:57:15 tesla kernel: HCNT = 0x0 SCBPTR = 0x0
> Oct  3 14:57:15 tesla kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
> Oct  3 14:57:15 tesla kernel:  DFCNTRL = 0x4, DFSTATUS = 0x6d
> Oct  3 14:57:15 tesla kernel: LASTPHASE = 0x80, SCSISIGI = 0x84, SXFRCTL0 = 0xa8Oct  3 14:57:15 tesla kernel: SSTAT0 = 0x7, SSTAT1 = 0x2
> Oct  3 14:57:15 tesla kernel: STACK == 0x37, 0x37, 0x15a, 0x19b
> Oct  3 14:57:15 tesla kernel: SCB count = 4
> Oct  3 14:57:15 tesla kernel: Kernel NEXTQSCB = 3
> Oct  3 14:57:15 tesla kernel: Card NEXTQSCB = 3
> Oct  3 14:57:15 tesla kernel: QINFIFO entries:
> Oct  3 14:57:15 tesla kernel: Waiting Queue entries:
> Oct  3 14:57:15 tesla kernel: Disconnected Queue entries:
> Oct  3 14:57:15 tesla kernel: QOUTFIFO entries:
> Oct  3 14:57:15 tesla kernel: Sequencer Free SCB List: 1 2
> Oct  3 14:57:15 tesla kernel: Sequencer SCB Info: 0(c 0x48, s 0x47, l 0, t 0x2) 1(c 0x0, s 0xff, l 255, t 0xff) 2(c 0x0, s 0xff, l 255, t 0xff)
> Oct  3 14:57:15 tesla kernel: Pending list: 2(c 0x48, s 0x47, l 0)
> Oct  3 14:57:15 tesla kernel: Kernel Free SCB list: 1 0
> Oct  3 14:57:15 tesla kernel: Untagged Q(4): 2
> Oct  3 14:57:15 tesla kernel: DevQ(0:4:0): 0 waiting
> Oct  3 14:57:15 tesla kernel: scsi1:0:4:0: Device is active, asserting ATN
> Oct  3 14:57:15 tesla kernel: Recovery code sleeping
> Oct  3 14:57:15 tesla kernel: (scsi1:A:4:0): Bus Device Reset Message Sent
> Oct  3 14:57:15 tesla kernel: Recovery SCB completes
> Oct  3 14:57:15 tesla kernel: Recovery code awake
> Oct  3 14:57:15 tesla kernel: scsi1: Bus Device Reset on A:4. 1 SCBs aborted
> Oct  3 14:57:15 tesla kernel: aic7xxx_dev_reset returns 0x2002
> Oct  3 14:57:15 tesla kernel: (scsi1:A:4:0): Unexpected busfree while idle
> Oct  3 14:57:15 tesla kernel: SEQADDR == 0x160



-- 
Psyche-list mailing list
Psyche-list@redhat.com
https://listman.redhat.com/mailman/listinfo/psyche-list

[Index of Archives]     [Fedora General Discussion]     [Red Hat General Discussion]     [Centos]     [Kernel]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat 9]     [Gimp]     [Yosemite News]

  Powered by Linux