ashu+xfree86@cs.cmu.edu wrote: > I recently bought an ATI Radeon 7500LE ( 64MB DDR ) card, and the driver > conks out for 1600x1200 resolution ( at 16-bit or 24-bit depths ). The > monitor basically switches off when I do startx. > > The card's main vendor id is: 1002 and sub-vendor id is: 5157. I read > somewhere that ATI cards which are manufactured by vendors other than > ATI do not sometimes work without tweaks. I have a "Powered by ATI" Radeon 7500LE 64MB DDR card that works in 1600x1200, 24-bit w/o any tweaking at all. My vendor ids match yours too. I turned in an RFE bug report for this (which contains my xf86 config file and log file) and Mike Harris added the info to the PCI ID repository: http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=68922 BTW, the card works fine with Red Hat Linux 8.0 too. Check the report out and make sure your monitor was set up properly. Hope that helps. Let us know if it doesn't. Tom _______________________________________________ xfree86-list mailing list xfree86-list@redhat.com https://listman.redhat.com/mailman/listinfo/xfree86-list IRC: #xfree86 on irc.redhat.com
