On Wed, 9 Oct 2002 ashu+xfree86@cs.cmu.edu wrote: > Hi all, > > I recently bought an ATI Radeon 7500LE ( 64MB DDR ) card, and the driver > conks out for 1600x1200 resolution ( at 16-bit or 24-bit depths ). The > monitor basically switches off when I do startx. > > The card's main vendor id is: 1002 and sub-vendor id is: 5157. I read > somewhere that ATI cards which are manufactured by vendors other than > ATI do not sometimes work without tweaks. As you suggest, this is not a "Made by ATI" card, it's a "Powered by ATI" because ATI's cards are vendor:1002, subvendor:1002 > > I would really appreciate it if somebody could provide me hints on how > exactly to tweak the configuration/driver! > Ashwin, hopefully someone can give you more information, but the best that I can offer is to try using some of the debugging suggestions from here: http://gatos.sourceforge.net/dri-debug.php When you've gathered whatever information you can using those procedures as far as is practical for you I'd suggest posting to the Xpert mailing list. Oisin Feeley _______________________________________________ xfree86-list mailing list xfree86-list@redhat.com https://listman.redhat.com/mailman/listinfo/xfree86-list IRC: #xfree86 on irc.redhat.com
