Hi all,
I recently bought an ATI Radeon 7500LE ( 64MB DDR ) card, and the driver
conks out for 1600x1200 resolution ( at 16-bit or 24-bit depths ). The
monitor basically switches off when I do startx.
The card's main vendor id is: 1002 and sub-vendor id is: 5157. I read
somewhere that ATI cards which are manufactured by vendors other than
ATI do not sometimes work without tweaks.
I would really appreciate it if somebody could provide me hints on how
exactly to tweak the configuration/driver!
I am attaching /var/log/XFree86.0.log and /etc/X11/XF86Config along
with.
Thanks in advance,
Ashwin
--
Three great virtues of a programmer - Laziness, Impatience and Hubris.
PERL FOLKLORE!
_ _ ashu@cs.cmu.edu 1313 Wean Hall,
|_|(_`|_|| |||\ | 412-268-5940 [O] Computer Science Dept.
| |._)| ||/\||| \| 412-521-3422 [R] CMU, Pittsburgh. PA.
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
OS Kernel: Linux version 2.4.18-14 (bhcompile@astest.test.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 12:13:11 EDT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct 8 12:57:57 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "IBM P200"
(**) | |-->Device "ATI Radeon 7500LE"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0730 card 0000,0000 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1039,0900 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1039,7013 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 1002,5157 card 174b,7161 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0x00009c00 - 0x00009cff (0x100) IX[B]
[4] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[5] -1 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[6] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[7] -1 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xbfc00000 - 0xcfcfffff (0x10100000) MX[B]
(--) PCI:*(1:0:0) ATI Radeon 7500 QW rev 0, Mem @ 0xc0000000/27, 0xcfef0000/16, I/O @ 0xa800/8, BIOS @ 0xcfec0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[1] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[2] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[3] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[5] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[6] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[7] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[8] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[10] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[11] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[12] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[13] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[1] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[2] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[3] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[5] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[6] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[7] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[8] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[10] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[11] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[12] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[13] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[6] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[8] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[11] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[17] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[18] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[19] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[20] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP),
ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Radeon 7500LE".
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Radeon 7500 QW (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[6] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[8] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[11] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[17] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[18] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[19] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[20] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[6] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[7] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[8] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[11] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[12] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[20] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[21] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[22] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[23] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "CrtScreen"
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 7500 QW (AGP)" (ChipID = 0x5157)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(--) RADEON(0): MMIO registers at 0xcfef0000
(--) RADEON(0): BIOS at 0xcfec0000
(II) RADEON(0): Video RAM override, using 65536 kB instead of 65536 kB
(**) RADEON(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(II) RADEON(0): Primary Display == Type 1
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C EDID Info:
(II) RADEON(0): Manufacturer: IBM Model: 199b Serial#: 6660513
(II) RADEON(0): Year: 1996 Week: 45
(II) RADEON(0): EDID Version: 1.0
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 39 vert.: 30
(II) RADEON(0): Gamma: 2.86
(II) RADEON(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) RADEON(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) RADEON(0): blueX: 0.155 blueY: 0.070 whiteX: 0.303 whiteY: 0.319
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 720x400@88Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@87Hz (interlaced)
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) RADEON(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 112.0 MHz Image Size: 350 x 280 mm
(II) RADEON(0): h_active: 1280 h_sync: 1308 h_sync_end 1508 h_blank_end 1760 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1027 v_sync_end 1030 v_blanking: 1056 v_border: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 148.0 MHz Image Size: 350 x 280 mm
(II) RADEON(0): h_active: 1280 h_sync: 1320 h_sync_end 1524 h_blank_end 1820 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1027 v_sync_end 1030 v_blanking: 1056 v_border: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 86.0 MHz Image Size: 373 x 280 mm
(II) RADEON(0): h_active: 1024 h_sync: 1032 h_sync_end 1096 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 768 v_sync_end 792 v_blanking: 806 v_border: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 168.0 MHz Image Size: 350 x 280 mm
(II) RADEON(0): h_active: 1600 h_sync: 1632 h_sync_end 1808 h_blank_end 2104 h_border: 0
(II) RADEON(0): v_active: 1280 v_sync: 1283 v_sync_end 1286 v_blanking: 1330 v_border: 0
(II) RADEON(0): End of DDC Monitor info
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=18300
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): IBM P200: Using hsync range of 29.00-90.00 kHz
(II) RADEON(0): IBM P200: Using vrefresh range of 50.00-120.00 Hz
(II) RADEON(0): Clock range: 20.00 to 350.00 MHz
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (hsync out of range)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (hsync out of range)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (hsync out of range)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (hsync out of range)
(--) RADEON(0): Virtual size is 1600x1200 (pitch 1600)
(**) RADEON(0): Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
(II) RADEON(0): Modeline "1600x1200" 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
(**) RADEON(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) RADEON(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) RADEON(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) RADEON(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) RADEON(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) RADEON(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(--) RADEON(0): Display dimensions: (390, 300) mm
(--) RADEON(0): DPI set to (104, 101)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): Depth moves disabled by default
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xcfef0000 - 0xcfefffff (0x10000) MX[B]
[1] 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B]
[8] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[9] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[10] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[11] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[12] -1 0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
[13] -1 0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
[14] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0x0000d400 - 0x0000d47f (0x80) IX[B]
[22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[23] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[24] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[25] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[26] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[27] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[28] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) RADEON(0): Write-combining range (0xc0000000,0x4000000)
(II) RADEON(0): Memory manager initialized to (0,0) (1600,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1600,1202)
(II) RADEON(0): Largest offscreen area available: 1600 x 6989
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 2404)
(II) RADEON(0): Largest offscreen area available: 1600 x 6988
(II) RADEON(0): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "IBM P200"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 29-90
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "ATI Radeon 7500LE"
Driver "ati"
VideoRam 65536
# Some 7500 boards aparently need this option enabled to work - bug (#62760)
Option "CrtScreen"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "ATI Radeon 7500LE"
Monitor "IBM P200"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
