Re: Optimize RAID0 for max IOPS?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



=) i know
but, every body tell software is slower, the solution - use hardware
ok
there´s no opensource firmware for raid hardware

i preffer a good software/hardware solution, linux raid is a good
software solution for me =)
but, why not try a opensource project? hehe
what we could do.... a virtual machine :P with only raid and nfs, or
make a dedicated cpu for raid (cpu affinity) and a portion of memory
only for raid cache (today i think raid software don´t have cache, it
shoudn´t, cache is done by linux at filesystem level, i´m right?)


2011/1/21 Wolfgang Denk <wd@xxxxxxx>:
> Dear Roberto,
>
> In message <AANLkTiki_FfRrLtL3dMsrDLXeT8jNO0ndnTNpXk1OXMW@xxxxxxxxxxxxxx> you wrote:
>> a good idea....
>> why not start a opensource raid controller?
>> what we need? a cpu, memory, power supply with battery or capacitor,
>> sas/sata (disk interfaces), pci-express or another (computer
>> interface)
>> it don´t need a operational system, since it will only run one program
>> with some threads (ok a small operational system to implement threads
>> easly)
>>
>> we could use arm, fpga, intel core2duo, atlhon, xeon, or another system...
>
> You could evenuse a processor dedicated for such a job, like a
> PPC440SPe or PPC460SX or similar, which provide hardware-offload
> capabilities for the RAID calculations.  These are even supported by
> drivers in mainline Linux.
>
> But again, thee would not helpo to maximize IOPS - goal for
> optimization has always been maximum sequential troughput only
> (and yes, I know exactly what I'm talking about; guess where the
> aforementioned drivers are coming from).
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@xxxxxxx
> I don't see any direct evidence ...  but, then, my crystal ball is in
> dire need of an ectoplasmic upgrade. :-)              -- Howard Smith
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux