Re: Optimize RAID0 for max IOPS?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



thanks, i never used a PPC440SPe, i will buy one for hobby =)

2011/1/21 Roberto Spadim <roberto@xxxxxxxxxxxxx>:
> =) i know
> but, every body tell software is slower, the solution - use hardware
> ok
> there´s no opensource firmware for raid hardware
>
> i preffer a good software/hardware solution, linux raid is a good
> software solution for me =)
> but, why not try a opensource project? hehe
> what we could do.... a virtual machine :P with only raid and nfs, or
> make a dedicated cpu for raid (cpu affinity) and a portion of memory
> only for raid cache (today i think raid software don´t have cache, it
> shoudn´t, cache is done by linux at filesystem level, i´m right?)
>
>
> 2011/1/21 Wolfgang Denk <wd@xxxxxxx>:
>> Dear Roberto,
>>
>> In message <AANLkTiki_FfRrLtL3dMsrDLXeT8jNO0ndnTNpXk1OXMW@xxxxxxxxxxxxxx> you wrote:
>>> a good idea....
>>> why not start a opensource raid controller?
>>> what we need? a cpu, memory, power supply with battery or capacitor,
>>> sas/sata (disk interfaces), pci-express or another (computer
>>> interface)
>>> it don´t need a operational system, since it will only run one program
>>> with some threads (ok a small operational system to implement threads
>>> easly)
>>>
>>> we could use arm, fpga, intel core2duo, atlhon, xeon, or another system...
>>
>> You could evenuse a processor dedicated for such a job, like a
>> PPC440SPe or PPC460SX or similar, which provide hardware-offload
>> capabilities for the RAID calculations.  These are even supported by
>> drivers in mainline Linux.
>>
>> But again, thee would not helpo to maximize IOPS - goal for
>> optimization has always been maximum sequential troughput only
>> (and yes, I know exactly what I'm talking about; guess where the
>> aforementioned drivers are coming from).
>>
>> Best regards,
>>
>> Wolfgang Denk
>>
>> --
>> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@xxxxxxx
>> I don't see any direct evidence ...  but, then, my crystal ball is in
>> dire need of an ectoplasmic upgrade. :-)              -- Howard Smith
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>
>
>
> --
> Roberto Spadim
> Spadim Technology / SPAEmpresarial
>



-- 
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux