one thing I noticed is that now the occurrence of these messages has increased a lot. They are just crowding my /var/log/messages like nothing else. I am not sure what to do next. On 7/19/06, Sunil Kumar <devsku at gmail.com> wrote: > > leaving it loaded during suspend doesn't help with the messages, they > still popup. Do you think I should try and adjust the timeouts that you had > mentioned once? > > > On 7/18/06, Hans de Goede <j.w.r.degoede at hhs.nl> wrote: > > > > > > > > Sunil Kumar wrote: > > > I used the file you provided with the 1.1.8 sources that I had from > > the > > > tar and I still get the same problem after resume from suspend: > > > > > > abituguru: timeout exceeded waiting for read state (bank: 33, sensor: > > 8) > > > abituguru: timeout exceeded waiting for ready state > > > abituguru: timeout exceeded waiting for ready state > > > abituguru: timeout exceeded waiting for ready state > > > abituguru: timeout exceeded waiting for read state (bank: 34, sensor: > > 15) > > > abituguru: timeout exceeded waiting for ready state > > > > > > bank:34 and bank: 33 messages are separated by half hour, while > > > consecutive messages separate by few seconds, if that helps...:) > > > > > > Also, note that I rmmod the module before I suspend and modprobe it > > > after I resume. With your code in place for suspend/resume, is that > > > still required? I want a safe suspend/resume, so I rmmod as many > > modules > > > I can before suspend. > > > > > > > That no longer should be nescesarry and might even be the cause of your > > problems, could you try just leaving it in the kernel during suspend? > > > > > I am not sure if the messages are a problem but you are a better judge > > > > > than me on that one. > > > > > > > They are harmless, but it would be nice to fix them never the less. > > > > Regards, > > > > Hans > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060719/ca93e33d/attachment.html
