Re: usbserial driving multiple devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 19, 2011 at 03:17:19PM +0200, azimout@xxxxxxxxx wrote:
> On 19 May 2011 14:48, Greg KH <greg@xxxxxxxxx> wrote:
> > On Thu, May 19, 2011 at 11:55:35AM +0200, azimout@xxxxxxxxx wrote:
> >> Hi list, I tried the following without success (usbserial.ko is already loaded):
> >> echo -n "1a46 0000" | sudo tee /sys/bus/usb-serial/drivers/generic/new_id
> >>
> >> No /dev/ttyUSB[09] is created, and I can confirm that the device is
> >> not bound to the module
> >> (I see this from /sys/bus/usb/drivers/usbserial)
> >>
> >> Any hints?
> >
> > Did you plug in your device after adding the id to it, or before?  Try
> > after.
> >
> > thanks,
> >
> > greg k-h
> >
> 
> Yes, I tried both before and after. Any other ideas?

echo -n "0x1a46 0x0000"

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux