On Thu, 2016-05-12 at 11:58 +0200, Christian Lamparter wrote: > > > http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/09/2012-lpc-ref-big-little-endian-herrenschmidt.odp > > > > but there are at least two more twists that you completely missed here: > > > > - Some architectures (e.g. ARMv5 "BE32" mode in IXP4xx, surely some others) > > do not implement big-endian mode by wiring up the data lines between the > > bus and the CPU differently between big- and little-endian mode like > > powerpc and armv7 "BE8" do, but instead they swizzle the *address* lines > > on 8-bit and 16-bit addresses. The effect of that is that normal RAM > > accesses work as expected both ways, and devices that are accessed using > > 32-bit MMIO ops never need any byteswap (you actually get "native > > endian") while MMIO with 8 and 16 bit width does something completely > > unexpected and touches the wrong register. Having an explicit byteswap > > on the PCI host bridge gets you the expected addresses again for 8-bit > > cycles but it also means that readl()/writel() again need to swap the > > data. Right. Old PowerPC did that too and it's completely stupid. Thankfully most vendors grew a clue since then and this practice has slowly fallen into oblivion. > > - Some other architectures (e.g. Broadcom MIPS) apparently are even fancier > > and use a strapping pin on the SoC flips the endianess of the CPU core > > at the same time as all the peripheral MMIO registers, with the intention > > of never requiring any byte swaps. I believe they are implemented careful > > enough to actually get this right, but it confuses the heck out of > > Linux drivers that don't expect this. Right. Drivers like that will need an explicit test in the accessors. Cheers, Ben. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
