-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Only in the hope that you might be able to do some additional magic
(but I won't be too disappointed if you tell that this time you have
already archieved enough) a fresh log for my scanner (that never
worked with USB-3.0 on my linux box and still doesn't do after the patch).
I can at least tell that my USB-3.0 hard disk (that always worked fine
with my computer) still works fine after the patch.
Kind regards,
Gunter.
On 29.01.2015 17:42, Mathias Nyman wrote:
> On 27.01.2015 14:12, Gunter Königsmann wrote:
>> That's very good news indeed.
>>
>> Will re-run the tests on my scanner and looking forward to the
>> fix entering mainline. In the meantime I can acknowledge that
>> with the fix my computer accepts USB memory sticks that normally
>> didn't work.
>>
>> Kind regards,
>>
>> Gunter.
>>
>>
>
> Did some cleaning of the patch, and noticed it still had a few bits
> wrong, but apparently it worked anyway.
>
> I added the fixes on top of the ep_reset_halt_test branch.
>
> Can any of you with a failing scanner test that it still works?
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git and
> the ep_reset_halt_test branch,
>
> Thanks
>
> -Mathias
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1ERG
-----END PGP SIGNATURE-----
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-rc5+ (gunter@Marius) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu2) ) #2 SMP PREEMPT Thu Jan 29 19:32:42 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-rc5+ root=UUID=6d0fd0ad-9048-4fdb-881a-eba6d6d13c3b ro rootflags=subvol=@ acpi_backlight=vendor init=/lib/systemd/systemd quiet splash acpi_backlight=vendor init=/lib/systemd/systemd vt.handoff=7 init=/lib/systemd/systemd
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000030daffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000030db0000-0x00000000321affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000321b0000-0x0000000036abefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000036abf000-0x0000000036ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000036ebf000-0x0000000036fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000036fbf000-0x0000000036ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000036fff000-0x0000000036ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037000000-0x000000003f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire S7-391/Storm, BIOS V2.09 11/16/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 037000000 mask FFF000000 uncachable
[ 0.000000] 2 base 038000000 mask FF8000000 uncachable
[ 0.000000] 3 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 1BF600000 mask FFFE00000 uncachable
[ 0.000000] 6 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 7 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x37000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fda000, 0x01fdafff] PGTABLE
[ 0.000000] BRK [0x01fdb000, 0x01fdbfff] PGTABLE
[ 0.000000] BRK [0x01fdc000, 0x01fdcfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bf400000-0x1bf5fffff]
[ 0.000000] [mem 0x1bf400000-0x1bf5fffff] page 2M
[ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1bf3fffff]
[ 0.000000] [mem 0x1a0000000-0x1bf3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x30daffff]
[ 0.000000] [mem 0x20200000-0x30bfffff] page 2M
[ 0.000000] [mem 0x30c00000-0x30daffff] page 4k
[ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x321b0000-0x36abefff]
[ 0.000000] [mem 0x321b0000-0x321fffff] page 4k
[ 0.000000] [mem 0x32200000-0x369fffff] page 2M
[ 0.000000] [mem 0x36a00000-0x36abefff] page 4k
[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x36fff000-0x36ffffff]
[ 0.000000] [mem 0x36fff000-0x36ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x2da75000-0x30daffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x0000000036FFE210 0000AC (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000036FFB000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x0000000036FEC000 00BCED (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000036FB9000 000040
[ 0.000000] ACPI: UEFI 0x0000000036FFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x0000000036FFC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x0000000036FFA000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x0000000036FF9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x0000000036FF8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 0x0000000036FEB000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: WDAT 0x0000000036FEA000 000224 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000036FE8000 001068 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x0000000036FE6000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x0000000036FE4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x0000000036FE3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x0000000036FE1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x0000000036FE0000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000036FDF000 0009AA (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x0000000036FDE000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: DMAR 0x0000000036FDD000 0000B0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bf5f7000-0x1bf5fbfff]
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801bae00000-ffff8801bebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bf5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x30daffff]
[ 0.000000] node 0: [mem 0x321b0000-0x36abefff]
[ 0.000000] node 0: [mem 0x36fff000-0x36ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1bf5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1bf5fffff]
[ 0.000000] On node 0 totalpages: 1002064
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3347 pages used for memmap
[ 0.000000] DMA32 zone: 214208 pages, LIFO batch:31
[ 0.000000] Normal zone: 12248 pages used for memmap
[ 0.000000] Normal zone: 783872 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x37a00000-0x3f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x30db0000-0x321affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x36abf000-0x36ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x36ebf000-0x36fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x36fbf000-0x36ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x37000000-0x3f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801bf200000 s88576 r8192 d30208 u262144
[ 0.000000] pcpu-alloc: s88576 r8192 d30208 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 986384
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-rc5+ root=UUID=6d0fd0ad-9048-4fdb-881a-eba6d6d13c3b ro rootflags=subvol=@ acpi_backlight=vendor init=/lib/systemd/systemd quiet splash acpi_backlight=vendor init=/lib/systemd/systemd vt.handoff=7 init=/lib/systemd/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3808636K/4008256K available (7949K kernel code, 1224K rwdata, 3772K rodata, 1376K init, 1300K bss, 199620K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.619 MHz processor
[ 0.000045] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.23 BogoMIPS (lpj=2394619)
[ 0.000049] pid_max: default: 32768 minimum: 301
[ 0.000055] ACPI: Core revision 20141107
[ 0.008951] ACPI: All ACPI Tables successfully acquired
[ 0.020388] Security Framework initialized
[ 0.020401] AppArmor: AppArmor initialized
[ 0.020403] Yama: becoming mindful.
[ 0.020762] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.022136] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022740] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022748] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022995] Initializing cgroup subsys memory
[ 0.023002] Initializing cgroup subsys devices
[ 0.023005] Initializing cgroup subsys freezer
[ 0.023007] Initializing cgroup subsys net_cls
[ 0.023010] Initializing cgroup subsys blkio
[ 0.023012] Initializing cgroup subsys perf_event
[ 0.023014] Initializing cgroup subsys net_prio
[ 0.023017] Initializing cgroup subsys hugetlb
[ 0.023045] CPU: Physical Processor ID: 0
[ 0.023047] CPU: Processor Core ID: 0
[ 0.023052] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.023546] mce: CPU supports 7 MCE banks
[ 0.023559] CPU0: Thermal monitoring enabled (TM1)
[ 0.023569] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.023723] Freeing SMP alternatives memory: 28K (ffffffff81e8c000 - ffffffff81e93000)
[ 0.024877] ftrace: allocating 29716 entries in 117 pages
[ 0.042721] dmar: Host address width 36
[ 0.042724] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.042732] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.042734] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.042738] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.042740] dmar: RMRR base: 0x00000036e8b000 end: 0x00000036eaafff
[ 0.042742] dmar: RMRR base: 0x00000037800000 end: 0x0000003f9fffff
[ 0.042818] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.042820] HPET id 0 under DRHD base 0xfed91000
[ 0.042821] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.043005] Enabled IRQ remapping in x2apic mode
[ 0.043007] Enabling x2apic
[ 0.043008] Enabled x2apic
[ 0.043030] Switched APIC routing to cluster x2apic.
[ 0.043511] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053523] smpboot: CPU0: Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz (fam: 06, model: 3a, stepping: 09)
[ 0.053535] TSC deadline timer enabled
[ 0.053567] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.053593] ... version: 3
[ 0.053594] ... bit width: 48
[ 0.053595] ... generic registers: 4
[ 0.053597] ... value mask: 0000ffffffffffff
[ 0.053598] ... max period: 0000ffffffffffff
[ 0.053599] ... fixed-purpose events: 3
[ 0.053600] ... event mask: 000000070000000f
[ 0.061706] x86: Booting SMP configuration:
[ 0.061708] .... node #0, CPUs: #1
[ 0.075559] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077591] #2 #3
[ 0.107024] x86: Booted up 1 node, 4 CPUs
[ 0.107028] smpboot: Total of 4 processors activated (19156.95 BogoMIPS)
[ 0.112044] devtmpfs: initialized
[ 0.115906] evm: security.selinux
[ 0.115907] evm: security.SMACK64
[ 0.115909] evm: security.SMACK64EXEC
[ 0.115910] evm: security.SMACK64TRANSMUTE
[ 0.115911] evm: security.SMACK64MMAP
[ 0.115912] evm: security.ima
[ 0.115913] evm: security.capability
[ 0.116018] PM: Registering ACPI NVS region [mem 0x36ebf000-0x36fbefff] (1048576 bytes)
[ 0.116226] pinctrl core: initialized pinctrl subsystem
[ 0.116351] RTC time: 18:41:19, date: 01/29/15
[ 0.116481] NET: Registered protocol family 16
[ 0.118860] cpuidle: using governor ladder
[ 0.121871] cpuidle: using governor menu
[ 0.121969] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.121971] ACPI: bus type PCI registered
[ 0.121973] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.122070] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.122073] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.122490] PCI: Using configuration type 1 for base access
[ 0.122746] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.122747] mtrr: probably your BIOS does not setup all CPUs.
[ 0.122748] mtrr: corrected configuration.
[ 0.127396] ACPI: Added _OSI(Module Device)
[ 0.127398] ACPI: Added _OSI(Processor Device)
[ 0.127400] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.127402] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.132006] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.135058] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.135462] ACPI: Dynamic OEM Table Load:
[ 0.135474] ACPI: SSDT 0xFFFF8801B99A2000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.136178] ACPI: Dynamic OEM Table Load:
[ 0.136188] ACPI: SSDT 0xFFFF8801B997A800 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.136783] ACPI: Dynamic OEM Table Load:
[ 0.136791] ACPI: SSDT 0xFFFF8801B98CBC00 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.145500] ACPI: Interpreter enabled
[ 0.145509] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.145515] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.145533] ACPI: (supports S0 S3 S4 S5)
[ 0.145535] ACPI: Using IOAPIC for interrupt routing
[ 0.145571] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.197141] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 0.200300] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.200306] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200460] \_SB_.PCI0:_OSC invalid UUID
[ 0.200461] _OSC request data:1 1f 0
[ 0.200466] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.201291] PCI host bridge to bus 0000:00
[ 0.201295] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.201297] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.201299] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.201301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.201303] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[ 0.201313] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.201428] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.201442] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x503fffff 64bit]
[ 0.201451] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.201457] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.201588] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.201613] pci 0000:00:14.0: reg 0x10: [mem 0x50500000-0x5050ffff 64bit]
[ 0.201697] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.201745] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.201801] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.201827] pci 0000:00:16.0: reg 0x10: [mem 0x50514000-0x5051400f 64bit]
[ 0.201915] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.202021] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.202040] pci 0000:00:1b.0: reg 0x10: [mem 0x50510000-0x50513fff 64bit]
[ 0.202130] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202184] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.202230] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.202334] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.202387] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.202439] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.202539] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.202590] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.202650] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.202910] pci 0000:00:1d.0: reg 0x10: [mem 0x50518000-0x505183ff]
[ 0.204404] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.204471] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.204526] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.204728] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.204750] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f]
[ 0.204760] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097]
[ 0.204769] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087]
[ 0.204779] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093]
[ 0.204788] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.204798] pci 0000:00:1f.2: reg 0x24: [mem 0x50517000-0x505177ff]
[ 0.204852] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.204939] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.204957] pci 0000:00:1f.3: reg 0x10: [mem 0x50515000-0x505150ff 64bit]
[ 0.204980] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f]
[ 0.205159] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.205295] pci 0000:02:00.0: [168c:0034] type 00 class 0x028000
[ 0.205356] pci 0000:02:00.0: reg 0x10: [mem 0x50400000-0x5047ffff 64bit]
[ 0.205483] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.205648] pci 0000:02:00.0: supports D1 D2
[ 0.205650] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205703] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.207421] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.207429] pci 0000:00:1c.3: bridge window [mem 0x50400000-0x504fffff]
[ 0.231347] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.231413] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.231476] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.231540] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.231601] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.231663] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.231724] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.231794] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.231915] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.231956] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.232077] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.232079] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.232082] vgaarb: loaded
[ 0.232084] vgaarb: bridge control possible 0000:00:02.0
[ 0.232348] SCSI subsystem initialized
[ 0.232408] libata version 3.00 loaded.
[ 0.232436] ACPI: bus type USB registered
[ 0.232459] usbcore: registered new interface driver usbfs
[ 0.232469] usbcore: registered new interface driver hub
[ 0.232493] usbcore: registered new device driver usb
[ 0.232670] PCI: Using ACPI for IRQ routing
[ 0.239899] PCI: pci_cache_line_size set to 64 bytes
[ 0.239950] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 0.239952] e820: reserve RAM buffer [mem 0x30db0000-0x33ffffff]
[ 0.239954] e820: reserve RAM buffer [mem 0x36abf000-0x37ffffff]
[ 0.239956] e820: reserve RAM buffer [mem 0x37000000-0x37ffffff]
[ 0.239957] e820: reserve RAM buffer [mem 0x1bf600000-0x1bfffffff]
[ 0.240084] NetLabel: Initializing
[ 0.240086] NetLabel: domain hash size = 128
[ 0.240087] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.240102] NetLabel: unlabeled traffic allowed by default
[ 0.240215] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.240222] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.242278] Switched to clocksource hpet
[ 0.248968] AppArmor: AppArmor Filesystem Enabled
[ 0.249049] pnp: PnP ACPI init
[ 0.270415] pnp 00:00: Plug and Play ACPI device, IDs ETD0504 PNP0f13 (active)
[ 0.270506] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.270509] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.270511] system 00:01: [io 0xffff] has been reserved
[ 0.270513] system 00:01: [io 0xffff] has been reserved
[ 0.270516] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.270518] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.270520] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.270522] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.270526] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.270563] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.270618] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.270621] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.270662] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.270809] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.270812] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.270814] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.270816] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.270818] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.270821] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.270823] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.270826] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.270828] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.270830] system 00:05: [mem 0x3fa00000-0x3fa00fff] has been reserved
[ 0.270833] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271090] pnp 00:06: disabling [mem 0x40004000-0x40004fff] because it overlaps 0000:00:02.0 BAR 2 [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.271115] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.271118] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.271138] pnp: PnP ACPI: found 7 devices
[ 0.278228] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.278258] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.278278] pci 0000:02:00.0: BAR 6: assigned [mem 0x50480000-0x5048ffff pref]
[ 0.278280] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.278290] pci 0000:00:1c.3: bridge window [mem 0x50400000-0x504fffff]
[ 0.278301] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.278303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.278312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.278314] pci_bus 0000:00: resource 7 [mem 0x3fa00000-0xfeafffff]
[ 0.278316] pci_bus 0000:02: resource 1 [mem 0x50400000-0x504fffff]
[ 0.278349] NET: Registered protocol family 2
[ 0.278547] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.278646] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.278723] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.278741] TCP: reno registered
[ 0.278748] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.278828] NET: Registered protocol family 1
[ 0.278845] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.291469] PCI: CLS 64 bytes, default 64
[ 0.291536] Trying to unpack rootfs image as initramfs...
[ 1.483518] Freeing initrd memory: 52460K (ffff88002da75000 - ffff880030db0000)
[ 1.483547] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.483550] software IO TLB [mem 0x32abf000-0x36abf000] (64MB) mapped at [ffff880032abf000-ffff880036abefff]
[ 1.483635] Simple Boot Flag at 0x44 set to 0x1
[ 1.483849] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 1.483983] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 1.483991] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 1.484002] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 1.484013] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 1.484086] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.484118] Scanning for low memory corruption every 60 seconds
[ 1.484582] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.484613] Initialise system trusted keyring
[ 1.484643] audit: initializing netlink subsys (disabled)
[ 1.484659] audit: type=2000 audit(1422556880.451:1): initialized
[ 1.485163] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.486951] zpool: loaded
[ 1.486954] zbud: loaded
[ 1.487154] VFS: Disk quotas dquot_6.5.2
[ 1.487195] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.487753] fuse init (API version 7.23)
[ 1.487932] Key type big_key registered
[ 1.488512] Key type asymmetric registered
[ 1.488517] Asymmetric key parser 'x509' registered
[ 1.488561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.488619] io scheduler noop registered
[ 1.488624] io scheduler deadline registered (default)
[ 1.488661] io scheduler cfq registered
[ 1.489081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.489102] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.489140] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.489142] vesafb: scrolling: redraw
[ 1.489144] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.489165] vesafb: framebuffer at 0x40000000, mapped to 0xffffc90010800000, using 8128k, total 8128k
[ 1.672031] Console: switching to colour frame buffer device 240x67
[ 1.854130] fb0: VESA VGA frame buffer device
[ 1.854154] intel_idle: MWAIT substates: 0x21120
[ 1.854155] intel_idle: v0.4 model 0x3A
[ 1.854157] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.855179] ACPI: AC Adapter [ACAD] (off-line)
[ 1.855290] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 1.855295] ACPI: Power Button [PWRB]
[ 1.855340] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input1
[ 1.876161] ACPI: Lid Switch [LID0]
[ 1.876222] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2
[ 1.876226] ACPI: Sleep Button [SLPB]
[ 1.876278] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.876281] ACPI: Power Button [PWRF]
[ 1.881240] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.881243] ACPI: Thermal Zone [TZS0] (53 C)
[ 1.883053] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.883055] ACPI: Thermal Zone [TZS1] (39 C)
[ 1.883089] GHES: HEST is not enabled!
[ 1.884615] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.054658] ACPI: Battery Slot [BAT0] (battery present)
[ 2.054860] Linux agpgart interface v0.103
[ 2.056921] brd: module loaded
[ 2.057665] loop: module loaded
[ 2.057930] libphy: Fixed MDIO Bus: probed
[ 2.057934] tun: Universal TUN/TAP device driver, 1.6
[ 2.057936] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 2.058000] PPP generic driver version 2.4.2
[ 2.058222] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.058231] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.058337] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.058436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.058438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.058440] usb usb1: Product: xHCI Host Controller
[ 2.058442] usb usb1: Manufacturer: Linux 3.19.0-rc5+ xhci-hcd
[ 2.058444] usb usb1: SerialNumber: 0000:00:14.0
[ 2.058616] hub 1-0:1.0: USB hub found
[ 2.058631] hub 1-0:1.0: 4 ports detected
[ 2.059077] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.059081] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.059125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.059127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.059129] usb usb2: Product: xHCI Host Controller
[ 2.059131] usb usb2: Manufacturer: Linux 3.19.0-rc5+ xhci-hcd
[ 2.059133] usb usb2: SerialNumber: 0000:00:14.0
[ 2.059294] hub 2-0:1.0: USB hub found
[ 2.059308] hub 2-0:1.0: 4 ports detected
[ 2.059702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.059714] ehci-pci: EHCI PCI platform driver
[ 2.059851] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.059859] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.059874] ehci-pci 0000:00:1d.0: debug port 2
[ 2.063770] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.063786] ehci-pci 0000:00:1d.0: irq 23, io mem 0x50518000
[ 2.068853] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.068898] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.068901] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.068903] usb usb3: Product: EHCI Host Controller
[ 2.068904] usb usb3: Manufacturer: Linux 3.19.0-rc5+ ehci_hcd
[ 2.068906] usb usb3: SerialNumber: 0000:00:1d.0
[ 2.069111] hub 3-0:1.0: USB hub found
[ 2.069121] hub 3-0:1.0: 2 ports detected
[ 2.069280] ehci-platform: EHCI generic platform driver
[ 2.069293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.069303] ohci-pci: OHCI PCI platform driver
[ 2.069316] ohci-platform: OHCI generic platform driver
[ 2.069326] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.069384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.075147] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.075181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.075422] mousedev: PS/2 mouse device common for all mice
[ 2.075970] rtc_cmos 00:02: RTC can wake from S4
[ 2.076193] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.076229] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.076322] device-mapper: uevent: version 1.0.3
[ 2.076435] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@xxxxxxxxxx
[ 2.076457] Intel P-state driver initializing.
[ 2.076592] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.076811] TCP: cubic registered
[ 2.076909] NET: Registered protocol family 10
[ 2.077093] NET: Registered protocol family 17
[ 2.077106] Key type dns_resolver registered
[ 2.077417] Loading compiled-in X.509 certificates
[ 2.078172] Loaded X.509 cert 'Magrathea: Glacier signing key: 50043a1e7a0b3281bf3f5add772c9e8b3471d0bf'
[ 2.078185] registered taskstats version 1
[ 2.079855] Key type trusted registered
[ 2.082644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.082725] Key type encrypted registered
[ 2.082730] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.082733] ima: No TPM chip found, activating TPM-bypass!
[ 2.082748] evm: HMAC attrs: 0x1
[ 2.083003] Magic number: 15:191:697
[ 2.083091] rtc_cmos 00:02: setting system clock to 2015-01-29 18:41:21 UTC (1422556881)
[ 2.083147] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.083148] EDD information not available.
[ 2.083213] PM: Hibernation image not present or could not be loaded.
[ 2.083471] Freeing unused kernel memory: 1376K (ffffffff81d34000 - ffffffff81e8c000)
[ 2.083473] Write protecting the kernel read-only data: 12288k
[ 2.083640] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000)
[ 2.083726] Freeing unused kernel memory: 324K (ffff880001baf000 - ffff880001c00000)
[ 2.093380] random: systemd-udevd urandom read with 7 bits of entropy available
[ 2.103968] wmi: Mapper loaded
[ 2.119223] ahci 0000:00:1f.2: version 3.0
[ 2.119401] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.125179] [drm] Initialized drm 1.1.0 20060810
[ 2.130402] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl RAID mode
[ 2.130407] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 2.136705] scsi host0: ahci
[ 2.136834] scsi host1: ahci
[ 2.136954] scsi host2: ahci
[ 2.137055] scsi host3: ahci
[ 2.137153] scsi host4: ahci
[ 2.137254] scsi host5: ahci
[ 2.137313] ata1: SATA max UDMA/133 abar m2048@0x50517000 port 0x50517100 irq 27
[ 2.137317] ata2: SATA max UDMA/133 abar m2048@0x50517000 port 0x50517180 irq 27
[ 2.137319] ata3: DUMMY
[ 2.137322] ata4: SATA max UDMA/133 abar m2048@0x50517000 port 0x50517280 irq 27
[ 2.137325] ata5: SATA max UDMA/133 abar m2048@0x50517000 port 0x50517300 irq 27
[ 2.137326] ata6: DUMMY
[ 2.161577] [drm] Memory usable by graphics device = 2048M
[ 2.161581] checking generic (40000000 7f0000) vs hw (40000000 10000000)
[ 2.161582] fb: switching to inteldrmfb from VESA VGA
[ 2.161598] Console: switching to colour dummy device 80x25
[ 2.161669] [drm] Replacing VGA console driver
[ 2.168096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.168099] [drm] Driver supports precise vblank timestamp query.
[ 2.168203] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.202080] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.202163] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.202240] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 2.262113] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.271599] fbcon: inteldrmfb (fb0) is primary device
[ 2.371236] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.412283] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 2.442285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.442633] ata1.00: ATA-8: LITEONIT CMT-128L3M, L3C6, max UDMA/133
[ 2.442635] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.443080] ata1.00: configured for UDMA/133
[ 2.443263] scsi 0:0:0:0: Direct-Access ATA LITEONIT CMT-128 L3C6 PQ: 0 ANSI: 5
[ 2.443617] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.443628] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.443659] sd 0:0:0:0: [sda] Write Protect is off
[ 2.443660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.443671] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.444353] sda: sda1 sda2 < sda5 >
[ 2.444856] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.485784] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.485785] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.486134] hub 3-1:1.0: USB hub found
[ 2.486199] hub 3-1:1.0: 8 ports detected
[ 2.486209] tsc: Refined TSC clocksource calibration: 2394.566 MHz
[ 2.578867] usb 1-4: New USB device found, idVendor=04f3, idProduct=0011
[ 2.578868] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 2.578869] usb 1-4: Product: Touchscreen
[ 2.578870] usb 1-4: Manufacturer: ELAN
[ 2.579086] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.583210] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.590802] usbcore: registered new interface driver usbhid
[ 2.590803] usbhid: USB HID core driver
[ 2.718516] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f04)
[ 2.733447] psmouse serio1: elantech: Synaptics capabilities query result 0x10, 0x17, 0x0d.
[ 2.748532] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.748870] ata2.00: ATA-8: LITEONIT CMT-128L3M, L3C6, max UDMA/133
[ 2.748871] ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.749316] ata2.00: configured for UDMA/133
[ 2.749536] scsi 1:0:0:0: Direct-Access ATA LITEONIT CMT-128 L3C6 PQ: 0 ANSI: 5
[ 2.749857] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.749875] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.749924] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.749925] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.749943] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.750282] sdb: sdb1
[ 2.750472] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.761565] usb 3-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.813500] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[ 2.849511] usb 3-1.6: string descriptor 0 read error: -22
[ 2.849514] usb 3-1.6: New USB device found, idVendor=0489, idProduct=e056
[ 2.849515] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.922960] usb 3-1.7: new high-speed USB device number 4 using ehci-pci
[ 3.054801] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.063953] usb 3-1.7: New USB device found, idVendor=04f2, idProduct=b33c
[ 3.063955] usb 3-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.063956] usb 3-1.7: Product: HD WebCam
[ 3.063956] usb 3-1.7: Manufacturer: SunplusIT INC.
[ 3.360064] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.487331] Switched to clocksource tsc
[ 3.530897] Console: switching to colour frame buffer device 240x67
[ 3.534617] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.534619] i915 0000:00:02.0: registered panic notifier
[ 3.672199] raid6: sse2x1 7164 MB/s
[ 3.689210] raid6: sse2x2 10058 MB/s
[ 3.706231] raid6: sse2x4 11937 MB/s
[ 3.706233] raid6: using algorithm sse2x4 (11937 MB/s)
[ 3.706235] raid6: using ssse3x2 recovery algorithm
[ 3.707681] xor: automatically using best checksumming function:
[ 3.717234] avx : 21692.000 MB/sec
[ 3.744551] Btrfs loaded
[ 3.753343] BTRFS: device fsid 6d0fd0ad-9048-4fdb-881a-eba6d6d13c3b devid 1 transid 52617 /dev/sda1
[ 3.753513] BTRFS: device fsid 6d0fd0ad-9048-4fdb-881a-eba6d6d13c3b devid 2 transid 52617 /dev/sdb1
[ 3.757257] BTRFS info (device sdb1): disk space caching is enabled
[ 3.801358] BTRFS: detected SSD devices, enabling SSD mode
[ 3.927969] systemd[1]: Inserted module 'autofs4'
[ 4.039060] BTRFS info (device sdb1): turning on discard
[ 4.039066] BTRFS info (device sdb1): disk space caching is enabled
[ 4.050156] lp: driver loaded but no devices found
[ 4.060616] ppdev: user-space parallel port driver
[ 4.088341] systemd-journald[276]: Received request to flush runtime journal from PID 1
[ 4.199021] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.201496] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 4.201504] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.201508] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 4.201512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.201514] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 4.201517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.201519] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 4.201523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.201524] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.262183] media: Linux media interface: v0.10
[ 4.268521] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:0011.0001/input/input8
[ 4.272497] Linux video capture interface: v2.00
[ 4.273791] hid-multitouch 0003:04F3:0011.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 4.285168] Bluetooth: Core ver 2.20
[ 4.285182] NET: Registered protocol family 31
[ 4.285184] Bluetooth: HCI device and connection manager initialized
[ 4.285188] Bluetooth: HCI socket layer initialized
[ 4.285191] Bluetooth: L2CAP socket layer initialized
[ 4.285198] Bluetooth: SCO socket layer initialized
[ 4.295650] cfg80211: Calling CRDA to update world regulatory domain
[ 4.299262] usbcore: registered new interface driver btusb
[ 4.304397] AVX version of gcm_enc/dec engaged.
[ 4.304400] AES CTR mode by8 optimization enabled
[ 4.309469] usbcore: registered new interface driver ath3k
[ 4.325817] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b33c)
[ 4.335909] input: HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.0/input/input10
[ 4.336254] usbcore: registered new interface driver uvcvideo
[ 4.336256] USB Video Class driver (1.1.1)
[ 4.350704] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 4.350717] acer_wmi: Function bitmap for Communication Button: 0x801
[ 4.390226] acer_wmi: Disabling ACPI video driver
[ 4.408485] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 4.408687] input: Acer WMI hotkeys as /devices/virtual/input/input11
[ 4.414771] cfg80211: World regulatory domain updated:
[ 4.414776] cfg80211: DFS Master region: unset
[ 4.414778] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.414781] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.414784] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.414786] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.414788] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.414790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4.415319] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[ 4.442641] intel_rapl: Found RAPL domain package
[ 4.442645] intel_rapl: Found RAPL domain core
[ 4.442647] intel_rapl: Found RAPL domain uncore
[ 4.451210] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.451215] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.451218] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.451220] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.451222] sound hdaudioC0D0: inputs:
[ 4.451224] sound hdaudioC0D0: Mic=0x12
[ 4.461681] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.461760] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.470584] ath: phy0: ASPM enabled: 0x43
[ 4.470590] ath: EEPROM regdomain: 0x6c
[ 4.470591] ath: EEPROM indicates we should expect a direct regpair map
[ 4.470595] ath: Country alpha2 being used: 00
[ 4.470596] ath: Regpair used: 0x6c
[ 4.476053] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.476411] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90010980000, irq=19
[ 4.518668] Adding 7811068k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:7811068k SSFS
[ 4.605375] audit: type=1400 audit(1422556884.019:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=630 comm="apparmor_parser"
[ 4.605381] audit: type=1400 audit(1422556884.019:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=630 comm="apparmor_parser"
[ 4.610256] audit: type=1400 audit(1422556884.024:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
[ 4.610264] audit: type=1400 audit(1422556884.024:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
[ 4.610269] audit: type=1400 audit(1422556884.024:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=630 comm="apparmor_parser"
[ 4.610273] audit: type=1400 audit(1422556884.024:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
[ 4.620454] audit: type=1400 audit(1422556884.034:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=630 comm="apparmor_parser"
[ 4.620464] audit: type=1400 audit(1422556884.034:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=630 comm="apparmor_parser"
[ 4.620470] audit: type=1400 audit(1422556884.034:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=630 comm="apparmor_parser"
[ 4.763657] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.763661] Bluetooth: BNEP filters: protocol multicast
[ 4.763665] Bluetooth: BNEP socket layer initialized
[ 4.783119] Bluetooth: RFCOMM TTY layer initialized
[ 4.783129] Bluetooth: RFCOMM socket layer initialized
[ 4.783135] Bluetooth: RFCOMM ver 1.11
[ 8.536120] wlan0: authenticate with 9c:c7:a6:6a:33:28
[ 8.546593] wlan0: send auth to 9c:c7:a6:6a:33:28 (try 1/3)
[ 8.549623] wlan0: authenticated
[ 8.550423] wlan0: associate with 9c:c7:a6:6a:33:28 (try 1/3)
[ 8.558568] wlan0: RX AssocResp from 9c:c7:a6:6a:33:28 (capab=0x431 status=0 aid=2)
[ 8.558685] wlan0: associated
[ 8.558790] cfg80211: Calling CRDA for country: DE
[ 8.560926] ath: EEPROM regdomain: 0x8114
[ 8.560928] ath: EEPROM indicates we should expect a country code
[ 8.560929] ath: doing EEPROM country->regdmn map search
[ 8.560930] ath: country maps to regdmn code: 0x37
[ 8.560932] ath: Country alpha2 being used: DE
[ 8.560932] ath: Regpair used: 0x37
[ 8.560934] ath: regdomain 0x8114 dynamically updated by country IE
[ 8.560965] cfg80211: Regulatory domain changed to country: DE
[ 8.560966] cfg80211: DFS Master region: ETSI
[ 8.560967] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.560969] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.560970] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.560972] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.560973] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
[ 8.560974] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 10.512535] random: nonblocking pool is initialized
[ 24.827537] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 24.827585] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 24.827622] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 24.827633] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 24.827744] pci_bus 0000:01: Allocating resources
[ 24.827754] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 24.827756] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 24.827757] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 24.827764] pci_bus 0000:02: Allocating resources
[ 24.827777] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 24.827779] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 24.827781] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 24.827783] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 24.827785] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 24.827787] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 24.827788] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 24.827790] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 24.827794] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0x3fb00000-0x3fcfffff]
[ 24.827797] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x3fd00000-0x3fefffff 64bit pref]
[ 24.827800] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0x50600000-0x507fffff 64bit pref]
[ 24.827804] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 24.827806] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 24.827888] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 180.433700] wlan0: deauthenticating from 9c:c7:a6:6a:33:28 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 180.445384] cfg80211: Calling CRDA to update world regulatory domain
[ 180.448048] cfg80211: World regulatory domain updated:
[ 180.448054] cfg80211: DFS Master region: unset
[ 180.448057] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 180.448062] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 180.448065] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 180.448069] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 180.448072] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 180.448075] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 180.495139] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 180.513697] PM: Syncing filesystems ... done.
[ 180.537738] PM: Preparing system for mem sleep
[ 180.537856] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 180.539135] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 180.540120] PM: Entering mem sleep
[ 180.540134] Suspending console(s) (use no_console_suspend to debug)
[ 180.540322] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 180.540342] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 180.540357] sd 1:0:0:0: [sdb] Stopping disk
[ 180.540384] sd 0:0:0:0: [sda] Stopping disk
[ 181.169859] PM: suspend of devices complete after 629.073 msecs
[ 181.181824] PM: late suspend of devices complete after 11.927 msecs
[ 181.183927] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 181.184022] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 181.194854] PM: noirq suspend of devices complete after 13.012 msecs
[ 181.195246] ACPI: Preparing to enter system sleep state S3
[ 181.211804] PM: Saving platform NVS memory
[ 181.211810] Disabling non-boot CPUs ...
[ 181.211859] intel_pstate CPU 1 exiting
[ 181.213093] kvm: disabling virtualization on CPU1
[ 181.213516] smpboot: CPU 1 is now offline
[ 181.213807] intel_pstate CPU 2 exiting
[ 181.214999] kvm: disabling virtualization on CPU2
[ 181.215018] smpboot: CPU 2 is now offline
[ 181.215643] intel_pstate CPU 3 exiting
[ 181.215744] Broke affinity for irq 27
[ 181.216757] kvm: disabling virtualization on CPU3
[ 181.216762] smpboot: CPU 3 is now offline
[ 181.218322] ACPI: Low-level resume complete
[ 181.218373] PM: Restoring platform NVS memory
[ 181.218755] Enabling non-boot CPUs ...
[ 181.218801] x86: Booting SMP configuration:
[ 181.218802] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 181.247242] kvm: enabling virtualization on CPU1
[ 181.249675] CPU1 is up
[ 181.249704] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 181.261276] kvm: enabling virtualization on CPU2
[ 181.263613] CPU2 is up
[ 181.263642] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 181.275236] kvm: enabling virtualization on CPU3
[ 181.277604] CPU3 is up
[ 181.282143] ACPI: Waking up from system sleep state S3
[ 181.316724] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 181.316740] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 181.317042] PM: noirq resume of devices complete after 11.222 msecs
[ 181.317385] PM: early resume of devices complete after 0.314 msecs
[ 181.317492] usb usb1: root hub lost power or was reset
[ 181.317494] usb usb2: root hub lost power or was reset
[ 181.319437] usb usb3: root hub lost power or was reset
[ 181.319504] ath: phy0: ASPM enabled: 0x43
[ 181.322773] sd 0:0:0:0: [sda] Starting disk
[ 181.322774] sd 1:0:0:0: [sdb] Starting disk
[ 181.323324] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 181.364320] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 181.629851] ata4: SATA link down (SStatus 0 SControl 300)
[ 181.632860] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 181.632886] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 181.633800] ata5: SATA link down (SStatus 0 SControl 300)
[ 181.634294] ata2.00: configured for UDMA/133
[ 181.637900] usb 3-1: reset high-speed USB device number 2 using ehci-pci
[ 181.640070] ata1.00: configured for UDMA/133
[ 181.686054] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[ 181.850599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b03c7480
[ 181.850601] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801b03c74c8
[ 181.850611] usb 1-4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 182.030468] usb 3-1.7: reset high-speed USB device number 4 using ehci-pci
[ 182.232833] PM: resume of devices complete after 914.661 msecs
[ 182.233036] PM: Finishing wakeup.
[ 182.233037] Restarting tasks ... done.
[ 182.280695] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[ 182.280703] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[ 182.280721] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000245 60000106
[ 182.322479] usb 3-1.5: new high-speed USB device number 5 using ehci-pci
[ 182.664654] usb 3-1.5: New USB device found, idVendor=0bda, idProduct=0138
[ 182.664659] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 182.664661] usb 3-1.5: Product: USB2.0-CRW
[ 182.664662] usb 3-1.5: Manufacturer: Generic
[ 182.664663] usb 3-1.5: SerialNumber: 20090516388200000
[ 182.671057] usb 3-1.6: USB disconnect, device number 3
[ 182.686461] usbcore: registered new interface driver usb-storage
[ 182.689006] usbcore: registered new interface driver uas
[ 182.690900] ums-realtek 3-1.5:1.0: USB Mass Storage device detected
[ 182.710225] scsi host6: usb-storage 3-1.5:1.0
[ 182.710428] usbcore: registered new interface driver ums-realtek
[ 182.865128] usb 3-1.5: USB disconnect, device number 5
[ 183.554639] usb 3-1.6: new full-speed USB device number 6 using ehci-pci
[ 183.641971] usb 3-1.6: string descriptor 0 read error: -22
[ 183.641990] usb 3-1.6: New USB device found, idVendor=0489, idProduct=e056
[ 183.641996] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 183.889935] usb 3-1.6: USB disconnect, device number 6
[ 184.066972] usb 3-1.6: new full-speed USB device number 7 using ehci-pci
[ 184.153916] usb 3-1.6: string descriptor 0 read error: -22
[ 184.153921] usb 3-1.6: New USB device found, idVendor=0489, idProduct=e056
[ 184.153923] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 185.918395] wlan0: authenticate with 9c:c7:a6:6a:33:28
[ 185.928981] wlan0: send auth to 9c:c7:a6:6a:33:28 (try 1/3)
[ 185.934030] wlan0: authenticated
[ 185.934475] wlan0: associate with 9c:c7:a6:6a:33:28 (try 1/3)
[ 185.940566] wlan0: RX AssocResp from 9c:c7:a6:6a:33:28 (capab=0x431 status=0 aid=2)
[ 185.940668] wlan0: associated
[ 185.940720] cfg80211: Calling CRDA for country: DE
[ 185.942758] ath: EEPROM regdomain: 0x8114
[ 185.942762] ath: EEPROM indicates we should expect a country code
[ 185.942763] ath: doing EEPROM country->regdmn map search
[ 185.942765] ath: country maps to regdmn code: 0x37
[ 185.942766] ath: Country alpha2 being used: DE
[ 185.942768] ath: Regpair used: 0x37
[ 185.942770] ath: regdomain 0x8114 dynamically updated by country IE
[ 185.942800] cfg80211: Regulatory domain changed to country: DE
[ 185.942802] cfg80211: DFS Master region: ETSI
[ 185.942803] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 185.942807] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 185.942809] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 185.942811] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 185.942813] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm), (0 s)
[ 185.942816] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 257.342166] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 290.868397] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 290.868406] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.868431] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 290.868435] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.868447] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0x2a0
[ 290.868451] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.868461] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x2a0
[ 290.868465] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.868511] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0
[ 290.868528] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 290.868542] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0
[ 290.868557] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0
[ 290.868586] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 290.874014] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 290.874036] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.874059] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 290.874063] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.874075] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0x2a0
[ 290.874079] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.874090] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x2a0
[ 290.874094] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 290.874137] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0
[ 290.874154] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 290.874168] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0
[ 290.874182] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0
[ 290.874211] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 294.858999] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 294.859013] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.859058] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 294.859066] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.859088] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0x2a0
[ 294.859095] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.859115] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x2a0
[ 294.859123] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.859201] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0
[ 294.859229] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 294.859252] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0
[ 294.859274] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0
[ 294.859314] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
[ 294.865506] xhci_hcd 0000:00:14.0: get port status, actual port 0 status = 0x2a0
[ 294.865517] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.865554] xhci_hcd 0000:00:14.0: get port status, actual port 1 status = 0x2a0
[ 294.865560] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.865577] xhci_hcd 0000:00:14.0: get port status, actual port 2 status = 0x2a0
[ 294.865583] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.865599] xhci_hcd 0000:00:14.0: get port status, actual port 3 status = 0x2a0
[ 294.865604] xhci_hcd 0000:00:14.0: Get port status returned 0x2a0
[ 294.865678] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 0 status = 0xe0002a0
[ 294.865700] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 294.865718] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 2 status = 0xe0002a0
[ 294.865735] xhci_hcd 0000:00:14.0: set port remote wake mask, actual port 3 status = 0xe0002a0
[ 294.865772] xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping port polling.
