On Wed, Nov 28, 2012 at 01:24:19PM +0000, Alan Cox wrote:
> > With regard to the ioctl, should this be an implementation of the ioctl
> > provided by the old out-of-tree driver, or is there an established
> > standard/example which I should write against instead?
>
> We have a standard (if possibly needing a few bits adding) ioctl for
> basic RS422/485 features. That's TIOCG/SRS485 (which for all the naming
> is also kind of 422 and other related bits as well)
Ok, thanks for the pointer. I'll take a look at this in due course.
> Can we get a Signed-off-by: for the first patch so we can try and get it
> into 3.8 ?
Sure. See below. The rest of the previous commit message was fine so I
haven't replicated it here.
jonathan
Signed-off-by: Jonathan Woithe <jwoithe@xxxxxxxxxx>
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 17b7d26..43c6b4f 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1040,6 +1040,253 @@ static int pci_asix_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+/* Quatech devices have their own extra interface features */
+
+struct quatech_feature {
+ u16 devid;
+ bool amcc;
+};
+
+#define QPCR_TEST_FOR1 0x3F
+#define QPCR_TEST_GET1 0x00
+#define QPCR_TEST_FOR2 0x40
+#define QPCR_TEST_GET2 0x40
+#define QPCR_TEST_FOR3 0x80
+#define QPCR_TEST_GET3 0x40
+#define QPCR_TEST_FOR4 0xC0
+#define QPCR_TEST_GET4 0x80
+
+#define QOPR_CLOCK_X1 0x0000
+#define QOPR_CLOCK_X2 0x0001
+#define QOPR_CLOCK_X4 0x0002
+#define QOPR_CLOCK_X8 0x0003
+#define QOPR_CLOCK_RATE_MASK 0x0003
+
+
+static struct quatech_feature quatech_cards[] = {
+ { PCI_DEVICE_ID_QUATECH_QSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC100E, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSC200, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC200E, 0 },
+ { PCI_DEVICE_ID_QUATECH_ESC100D, 1 },
+ { PCI_DEVICE_ID_QUATECH_ESC100M, 1 },
+ { PCI_DEVICE_ID_QUATECH_QSCP100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSCP100, 1 },
+ { PCI_DEVICE_ID_QUATECH_QSCP200, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSCP200, 1 },
+ { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 },
+ { 0, }
+};
+
+static int pci_quatech_amcc(u16 devid)
+{
+ struct quatech_feature *qf = &quatech_cards[0];
+ while (qf->devid) {
+ if (qf->devid == devid)
+ return qf->amcc;
+ qf++;
+ }
+ pr_err("quatech: unknown port type '0x%04X'.\n", devid);
+ return 0;
+};
+
+static int pci_quatech_rqopr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+ return val;
+}
+
+static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(qopr, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+}
+
+static int pci_quatech_rqmcr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val, qmcr;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(val | 0x10, base + UART_SCR);
+ qmcr = inb(base + UART_MCR);
+ outb(val, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+
+ return qmcr;
+}
+
+static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(val | 0x10, base + UART_SCR);
+ outb(qmcr, base + UART_MCR);
+ outb(val, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+}
+
+static int pci_quatech_has_qmcr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ if (val & 0x20) {
+ outb(0x80, UART_LCR);
+ if (!(inb(UART_SCR) & 0x20)) {
+ outb(LCR, base + UART_LCR);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int pci_quatech_test(struct uart_8250_port *port)
+{
+ u8 reg;
+ u8 qopr = pci_quatech_rqopr(port);
+ pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET1)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET2)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET3)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET4)
+ return -EINVAL;
+
+ pci_quatech_wqopr(port, qopr);
+ return 0;
+}
+
+static int pci_quatech_clock(struct uart_8250_port *port)
+{
+ u8 qopr, reg, set;
+ unsigned long clock;
+
+ if (pci_quatech_test(port) < 0)
+ return 1843200;
+
+ qopr = pci_quatech_rqopr(port);
+
+ pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8);
+ reg = pci_quatech_rqopr(port);
+ if (reg & QOPR_CLOCK_X8) {
+ clock = 1843200;
+ goto out;
+ }
+ pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8);
+ reg = pci_quatech_rqopr(port);
+ if (!(reg & QOPR_CLOCK_X8)) {
+ clock = 1843200;
+ goto out;
+ }
+ reg &= QOPR_CLOCK_X8;
+ if (reg == QOPR_CLOCK_X2) {
+ clock = 3685400;
+ set = QOPR_CLOCK_X2;
+ } else if (reg == QOPR_CLOCK_X4) {
+ clock = 7372800;
+ set = QOPR_CLOCK_X4;
+ } else if (reg == QOPR_CLOCK_X8) {
+ clock = 14745600;
+ set = QOPR_CLOCK_X8;
+ } else {
+ clock = 1843200;
+ set = QOPR_CLOCK_X1;
+ }
+ qopr &= ~QOPR_CLOCK_RATE_MASK;
+ qopr |= set;
+
+out:
+ pci_quatech_wqopr(port, qopr);
+ return clock;
+}
+
+static int pci_quatech_rs422(struct uart_8250_port *port)
+{
+ u8 qmcr;
+ int rs422 = 0;
+
+ if (!pci_quatech_has_qmcr(port))
+ return 0;
+ qmcr = pci_quatech_rqmcr(port);
+ pci_quatech_wqmcr(port, 0xFF);
+ if (pci_quatech_rqmcr(port))
+ rs422 = 1;
+ pci_quatech_wqmcr(port, qmcr);
+ return rs422;
+}
+
+static int pci_quatech_init(struct pci_dev *dev)
+{
+ if (pci_quatech_amcc(dev->device)) {
+ unsigned long base = pci_resource_start(dev, 0);
+ if (base) {
+ u32 tmp;
+ outl(inl(base + 0x38), base + 0x38);
+ tmp = inl(base + 0x3c);
+ outl(tmp | 0x01000000, base + 0x3c);
+ outl(tmp, base + 0x3c);
+ }
+ }
+ return 0;
+}
+
+static int pci_quatech_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ /* Needed by pci_quatech calls below */
+ port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags));
+ /* Set up the clocking */
+ port->port.uartclk = pci_quatech_clock(port);
+ /* For now just warn about RS422 */
+ if (pci_quatech_rs422(port))
+ pr_warn( "quatech: software control of RS422 features not currently supported.\n");
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static void __devexit pci_quatech_exit(struct pci_dev *dev)
+{
+}
+
static int pci_default_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1503,6 +1750,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
.exit = __devexit_p(pci_plx9050_exit),
},
+ /* Quatech */
+ {
+ .vendor = PCI_VENDOR_ID_QUATECH,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_quatech_init,
+ .setup = pci_quatech_setup,
+ .exit = __devexit_p(pci_quatech_exit),
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
@@ -3257,18 +3514,70 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
0x10b5, 0x106a, 0, 0,
pbn_plx_romulus },
+ /*
+ * Quatech cards. These actually have configurable clocks but for
+ * now we just use the default.
+ *
+ * 100 series are RS232, 200 series RS422,
+ */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_8_115200 },
+
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
0, 0,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d36b82..ce45006 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1867,8 +1867,23 @@
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
+#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
+#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
+#define PCI_DEVICE_ID_QUATECH_QSCP100 0x0120
+#define PCI_DEVICE_ID_QUATECH_DSCP100 0x0130
+#define PCI_DEVICE_ID_QUATECH_QSCP200 0x0140
+#define PCI_DEVICE_ID_QUATECH_DSCP200 0x0150
+#define PCI_DEVICE_ID_QUATECH_QSCLP100 0x0170
+#define PCI_DEVICE_ID_QUATECH_DSCLP100 0x0180
+#define PCI_DEVICE_ID_QUATECH_DSC100E 0x0181
+#define PCI_DEVICE_ID_QUATECH_SSCLP100 0x0190
+#define PCI_DEVICE_ID_QUATECH_QSCLP200 0x01A0
+#define PCI_DEVICE_ID_QUATECH_DSCLP200 0x01B0
+#define PCI_DEVICE_ID_QUATECH_DSC200E 0x01B1
+#define PCI_DEVICE_ID_QUATECH_SSCLP200 0x01C0
+#define PCI_DEVICE_ID_QUATECH_ESCLP100 0x01E0
#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
#define PCI_VENDOR_ID_SEALEVEL 0x135e
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
