On Thu, 15 Nov 2012 10:41:10 +1030
Jonathan Woithe <jwoithe@xxxxxxxxxx> wrote:
> On Wed, Nov 14, 2012 at 11:57:19PM +0000, Alan Cox wrote:
> > > our upcoming system. I'm guessing that the difficulties with the driver as
> > > it's currently structured may have been the reason it was never pushed to
> > > mainline by the original author in 2007.
> >
> > There are not many difficulties I can see. You just add the identifiers
> > to the 8250_pci tables and a couple of small bits of code and everything
> > but the RS422/485 stuff just works.
> >
> > If you need the RS422 stuff then yes its a bit more work.
>
> Unfortunately we need the RS422 stuff - that's the reason for using the
> DSC-200/300 card.
>
> Thanks for the comments and feedback - I'll take another look at things in
> the light of the information. If the functionality we require requires a
> significant amount of new code to be written, I suspect that the work will
> be deemed too time consuming by those who call the shots. We'll see.
First guess at what you need except for the RS422 registers is attached. To
get the RS422 features working needs the tool tracing (or driver printks adding)
to see what QMCR and QOPR bits map to which RS422 features.
Given that if you just force the bits you want in with the RS422 warning I expect
it'll just work for your case and should then be trivial to add the ioctl.
Alan
commit b6175d06d8b101e2ae523b92a91dad0150f677fa
Author: Alan Cox <alan@xxxxxxxxxxxxxxx>
Date: Thu Nov 15 13:42:37 2012 +0000
quatech: add the other serial identifiers
Jonathan Woithe posted an out of tree enabler/control module for these cards. Lift
the relevant identifiers and put them in the 8250_pci driver.
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 508063b..9a27e92 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1040,6 +1040,251 @@ static int pci_asix_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+/* Quatech devices have their own extra interface features */
+
+struct quatech_feature {
+ u16 devid;
+ bool amcc;
+};
+
+#define QPCR_TEST_FOR1 0x3F
+#define QPCR_TEST_GET1 0x00
+#define QPCR_TEST_FOR2 0x40
+#define QPCR_TEST_GET2 0x40
+#define QPCR_TEST_FOR3 0x80
+#define QPCR_TEST_GET3 0x40
+#define QPCR_TEST_FOR4 0xC0
+#define QPCR_TEST_GET4 0x80
+
+#define QOPR_CLOCK_X1 0x0000
+#define QOPR_CLOCK_X2 0x0001
+#define QOPR_CLOCK_X4 0x0002
+#define QOPR_CLOCK_X8 0x0003
+#define QOPR_CLOCK_RATE_MASK 0x0003
+
+
+static struct quatech_feature quatech_cards[] = {
+ { PCI_DEVICE_ID_QUATECH_QSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC100E, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSC200, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSC200E, 0 },
+ { PCI_DEVICE_ID_QUATECH_ESC100D, 1 },
+ { PCI_DEVICE_ID_QUATECH_ESC100M, 1 },
+ { PCI_DEVICE_ID_QUATECH_QSCP100, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSCP100, 1 },
+ { PCI_DEVICE_ID_QUATECH_QSCP200, 1 },
+ { PCI_DEVICE_ID_QUATECH_DSCP200, 1 },
+ { PCI_DEVICE_ID_QUATECH_ESCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_QSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_SSCLP100, 0 },
+ { PCI_DEVICE_ID_QUATECH_QSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_DSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_SSCLP200, 0 },
+ { PCI_DEVICE_ID_QUATECH_SPPXP_100, 0 },
+ { 0, }
+};
+
+static int pci_quatech_amcc(u16 devid)
+{
+ struct quatech_feature *qf = &quatech_cards[0];
+ while (qf->devid) {
+ if (qf->devid == devid)
+ return qf->amcc;
+ qf++;
+ }
+ pr_err("quatech: unknown port type '0x%04X'.\n", devid);
+ return 0;
+};
+
+static int pci_quatech_rqopr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+ return val;
+}
+
+static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(qopr, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+}
+
+static int pci_quatech_rqmcr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val, qmcr;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(val | 0x10, base + UART_SCR);
+ qmcr = inb(base + UART_MCR);
+ outb(val, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+
+ return qmcr;
+}
+
+static void pci_quatech_wqmcr(struct uart_8250_port *port, u8 qmcr)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ outb(val | 0x10, base + UART_SCR);
+ outb(qmcr, base + UART_MCR);
+ outb(val, base + UART_SCR);
+ outb(LCR, base + UART_LCR);
+}
+
+static int pci_quatech_has_qmcr(struct uart_8250_port *port)
+{
+ unsigned long base = port->port.iobase;
+ u8 LCR, val;
+
+ LCR = inb(base + UART_LCR);
+ outb(0xBF, base + UART_LCR);
+ val = inb(base + UART_SCR);
+ if (val & 0x20) {
+ outb(0x80, UART_LCR);
+ if (!(inb(UART_SCR) & 0x20)) {
+ outb(LCR, base + UART_LCR);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int pci_quatech_test(struct uart_8250_port *port)
+{
+ u8 reg;
+ u8 qopr = pci_quatech_rqopr(port);
+ pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET1)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR2);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET2)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR3);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET3)
+ return -EINVAL;
+ pci_quatech_wqopr(port, (qopr & QPCR_TEST_FOR1)|QPCR_TEST_FOR4);
+ reg = pci_quatech_rqopr(port) & 0xC0;
+ if (reg != QPCR_TEST_GET4)
+ return -EINVAL;
+
+ pci_quatech_wqopr(port, qopr);
+ return 0;
+}
+
+static int pci_quatech_clock(struct uart_8250_port *port)
+{
+ u8 qopr, reg, set;
+ unsigned long clock;
+
+ if (pci_quatech_test(port) < 0)
+ return 1843200;
+
+ qopr = pci_quatech_rqopr(port);
+
+ pci_quatech_wqopr(port, qopr & ~QOPR_CLOCK_X8);
+ reg = pci_quatech_rqopr(port);
+ if (reg & QOPR_CLOCK_X8) {
+ clock = 1843200;
+ goto out;
+ }
+ pci_quatech_wqopr(port, qopr | QOPR_CLOCK_X8);
+ reg = pci_quatech_rqopr(port);
+ if (!(reg & QOPR_CLOCK_X8)) {
+ clock = 1843200;
+ goto out;
+ }
+ reg &= QOPR_CLOCK_X8;
+ if (reg == QOPR_CLOCK_X2) {
+ clock = 3685400;
+ set = QOPR_CLOCK_X2;
+ } else if (reg == QOPR_CLOCK_X4) {
+ clock = 7372800;
+ set = QOPR_CLOCK_X4;
+ } else if (reg == QOPR_CLOCK_X8) {
+ clock = 14745600;
+ set = QOPR_CLOCK_X8;
+ } else {
+ clock = 1843200;
+ set = QOPR_CLOCK_X1;
+ }
+ qopr &= ~QOPR_CLOCK_RATE_MASK;
+ qopr |= set;
+
+out:
+ pci_quatech_wqopr(port, qopr);
+ return clock;
+}
+
+static int pci_quatech_rs422(struct uart_8250_port *port)
+{
+ u8 qmcr;
+ int rs422 = 0;
+
+ if (!pci_quatech_has_qmcr(port))
+ return 0;
+ qmcr = pci_quatech_rqmcr(port);
+ pci_quatech_wqmcr(port, 0xFF);
+ if (pci_quatech_rqmcr(port))
+ rs422 = 1;
+ pci_quatech_wqmcr(port, qmcr);
+ return rs422;
+}
+
+static int pci_quatech_init(struct pci_dev *dev)
+{
+ if (pci_quatech_amcc(dev->device)) {
+ unsigned long base = pci_resource_start(dev, 0);
+ if (base) {
+ u32 tmp;
+ outl(inl(base + 0x38), base + 0x38);
+ tmp = inl(base + 0x3c);
+ outl(tmp | 0x01000000, base + 0x3c);
+ outl(tmp, base + 0x3c);
+ }
+ }
+ return 0;
+}
+
+static int pci_quatech_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ /* Set up the clocking */
+ port->port.uartclk = pci_quatech_clock(port);
+ /* For now just warn about RS422 */
+ if (pci_quatech_rs422(port))
+ pr_warn( "quatech: RS422 feature set not currently supported.\n");
+ return pci_default_setup(priv, board, port, idx);
+}
+
+static void __devexit pci_quatech_exit(struct pci_dev *dev)
+{
+}
+
static int pci_default_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1503,6 +1748,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
.exit = __devexit_p(pci_plx9050_exit),
},
+ /* Quatech */
+ {
+ .vendor = PCI_VENDOR_ID_QUATECH,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_quatech_init,
+ .setup = pci_quatech_setup,
+ .exit = __devexit_p(pci_quatech_exit),
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
@@ -3257,18 +3512,70 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
0x10b5, 0x106a, 0, 0,
pbn_plx_romulus },
+ /*
+ * Quatech cards. These actually have configurable clocks but for
+ * now we just use the default.
+ *
+ * 100 series are RS232, 200 series RS422,
+ */
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC200E,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SSCLP200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESCLP100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_8_115200 },
+
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
0, 0,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9d36b82..ce45006 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1867,8 +1867,23 @@
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020
+#define PCI_DEVICE_ID_QUATECH_DSC200 0x0030
+#define PCI_DEVICE_ID_QUATECH_QSC200 0x0040
#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050
#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060
+#define PCI_DEVICE_ID_QUATECH_QSCP100 0x0120
+#define PCI_DEVICE_ID_QUATECH_DSCP100 0x0130
+#define PCI_DEVICE_ID_QUATECH_QSCP200 0x0140
+#define PCI_DEVICE_ID_QUATECH_DSCP200 0x0150
+#define PCI_DEVICE_ID_QUATECH_QSCLP100 0x0170
+#define PCI_DEVICE_ID_QUATECH_DSCLP100 0x0180
+#define PCI_DEVICE_ID_QUATECH_DSC100E 0x0181
+#define PCI_DEVICE_ID_QUATECH_SSCLP100 0x0190
+#define PCI_DEVICE_ID_QUATECH_QSCLP200 0x01A0
+#define PCI_DEVICE_ID_QUATECH_DSCLP200 0x01B0
+#define PCI_DEVICE_ID_QUATECH_DSC200E 0x01B1
+#define PCI_DEVICE_ID_QUATECH_SSCLP200 0x01C0
+#define PCI_DEVICE_ID_QUATECH_ESCLP100 0x01E0
#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
#define PCI_VENDOR_ID_SEALEVEL 0x135e
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
