Re: libata, devm_*, and MSI ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michael Ellerman wrote:
On Tue, 2009-01-20 at 20:02 -0800, Grant Grundler wrote:
..
1) post lspci -v output to verify device (and bridges) is programmed correctly.
2) look for chipset quirks that disable global msi

The kernel shouldn't let you enable MSI if that's the case, ie.
pci_enable_msi() should fail.
..

Exactly.  So it shouldn't be that, then.

It might still be worth looking at the quirks though, in case there's
one for a previous revision of your bridge or something.

3) Make sure MMIO ranges for 0xfee00000 are routed to local APIC
   ie each bridge needs to route that address somehow (negative decode
is common for upstream).
4) manually trigger the MSI by doing a MMIO write to the correct
0xfee00000 address with the assigned vector in order to see if your
interrupt handler gets called.

And can you plug something directly into the PCIe bus? If so does MSI
work on that?
..

Yup.  PCIe cards have no problem with MSI in that box.

More later..
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux