On Mon, Mar 14, 2016 at 11:25:59AM +0100, Yegor Yefremov wrote: Hi Yegor, > Hi Bin, > > On Wed, Jan 27, 2016 at 11:01 AM, Ladislav Michl <ladis@xxxxxxxxxxxxxx> wrote: > > Any chance it will actually happen? MUSB is still unusable for me and > > doesn't work properly since TI's 2.6.37 kernel (oldest one I have > > tried)... > > The issue with musb_h_tx_flush_fifo still persists. Kernel 4.5.0-rc6. > Just activating SImCOM SIM7100E produces following error: > > # usb 1-1.3: new high-speed USB device number 6 using musb-hdrc > usbcore: registered new interface driver option > usbserial: USB Serial support registered for GSM modem (1-port) > option 1-1.3:1.0: GSM modem (1-port) converter detected > usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB4 > option 1-1.3:1.1: GSM modem (1-port) converter detected > usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB5 > option 1-1.3:1.2: GSM modem (1-port) converter detected > usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB6 > option 1-1.3:1.3: GSM modem (1-port) converter detected > usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB7 > option 1-1.3:1.4: GSM modem (1-port) converter detected > usb 1-1.3: GSM modem (1-port) converter now attached to ttyUSB8 > qmi_wwan 1-1.3:1.5: cdc-wdm0: USB WDM device > qmi_wwan 1-1.3:1.5 wwan0: register 'qmi_wwan' at > usb-musb-hdrc.0.auto-1.3, WWAN/QMI device, b2:67:d8:31:8f:b6 > usbcore: registered new interface driver qmi_wwan > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 868 at drivers/usb/musb/musb_host.c:139 > musb_h_tx_flush_fifo+0xc4/0xe4() > musb-hdrc musb-hdrc.0.auto: Could not flush host TX2 fifo: csr: 2403 > Modules linked in: qmi_wwan option usb_wwan ftdi_sio usbserial > musb_dsps musb_am335x > CPU: 0 PID: 868 Comm: ModemManager Not tainted 4.5.0-rc6 #47 > Hardware name: Generic AM33XX (Flattened Device Tree) > [<c0017e34>] (unwind_backtrace) from [<c0014088>] (show_stack+0x10/0x14) > [<c0014088>] (show_stack) from [<c02c5b24>] (dump_stack+0xb0/0xe4) > [<c02c5b24>] (dump_stack) from [<c003bca4>] (warn_slowpath_common+0x7c/0xb8) > [<c003bca4>] (warn_slowpath_common) from [<c003bd10>] > (warn_slowpath_fmt+0x30/0x40) > [<c003bd10>] (warn_slowpath_fmt) from [<c041ec10>] > (musb_h_tx_flush_fifo+0xc4/0xe4) > [<c041ec10>] (musb_h_tx_flush_fifo) from [<c041fd54>] > (musb_cleanup_urb+0xbc/0x130) > [<c041fd54>] (musb_cleanup_urb) from [<c0420404>] (musb_urb_dequeue+0xf0/0x128) > [<c0420404>] (musb_urb_dequeue) from [<c03fa82c>] (usb_hcd_unlink_urb+0x50/0x84) > [<c03fa82c>] (usb_hcd_unlink_urb) from [<c03fba70>] (usb_kill_urb+0x4c/0xc4) > [<c03fba70>] (usb_kill_urb) from [<bf02f85c>] > (usb_wwan_close+0xbc/0xf0 [usb_wwan]) > [<bf02f85c>] (usb_wwan_close [usb_wwan]) from [<c0322ce8>] > (tty_port_shutdown+0x90/0x9c) > [<c0322ce8>] (tty_port_shutdown) from [<c03233cc>] (tty_port_close+0x24/0x4c) > [<c03233cc>] (tty_port_close) from [<c031a258>] (tty_release+0xec/0x478) > [<c031a258>] (tty_release) from [<c014ef38>] (__fput+0x80/0x1d0) > [<c014ef38>] (__fput) from [<c005a8d8>] (task_work_run+0x90/0xc4) > [<c005a8d8>] (task_work_run) from [<c0013a4c>] (do_work_pending+0x8c/0xb4) > [<c0013a4c>] (do_work_pending) from [<c000f8e8>] (slow_work_pending+0xc/0x20) > ---[ end trace fb2fc0420e2c4594 ]--- > > Could you please take a look at this? > > Yegor I cannot reproduce it anymore, as commits 4c2ba0c67394514f3f75c660c9f5d02e66a7efd4 bba40e6948b94cba71965285fbac31bd078c024a fixed issue for me (using Inventra DMA on DM3730) - but those two are part of 4.5.0-rc6 ... Best regards, ladis -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
