Hi Felipe, hi Ladislav,
On Wed, Oct 14, 2015 at 1:47 AM, Ladislav Michl <ladis@xxxxxxxxxxxxxx> wrote:
> On Mon, Aug 31, 2015 at 03:11:58PM +0200, Yegor Yefremov wrote:
>> Hi Felipe,
>>
>> On Fri, Aug 7, 2015 at 12:57 PM, Yegor Yefremov
>> <yegorslists@xxxxxxxxxxxxxx> wrote:
>> > On Fri, Aug 7, 2015 at 12:16 PM, Yegor Yefremov
>> > <yegorslists@xxxxxxxxxxxxxx> wrote:
>> >> On Thu, Aug 6, 2015 at 4:21 PM, Felipe Balbi <balbi@xxxxxx> wrote:
>> >>> HI,
>> >>>
>> >>> On Thu, Aug 06, 2015 at 09:40:26AM +0200, Yegor Yefremov wrote:
>> >>>> I performed a stress test with several FT4232H chips connected to a
>> >>>
>> >>> how many ?
>> >>
>> >> # lsusb -t
>> >> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
>> >> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
>> >> |__ Port 1: Dev 2, If 0, Class=, Driver=hub/4p, 480M
>> >> |__ Port 1: Dev 3, If 0, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 1: Dev 3, If 1, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 1: Dev 3, If 2, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 1: Dev 3, If 3, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 2: Dev 4, If 0, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 2: Dev 4, If 1, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 2: Dev 4, If 2, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 2: Dev 4, If 3, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 3: Dev 5, If 0, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 3: Dev 5, If 1, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 3: Dev 5, If 2, Class=, Driver=ftdi_sio, 480M
>> >> |__ Port 3: Dev 5, If 3, Class=, Driver=ftdi_sio, 480M
>> >>
>> >> 3 chips a 4-ports are attached.
>> >
>> > Warnings appear on another device (without internal hub) with only one
>> > FT4232H too:
>> >
>> > # lsusb -t
>> > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
>> > |__ Port 1: Dev 2, If 0, Class=, Driver=ftdi_sio, 480M
>> > |__ Port 1: Dev 2, If 1, Class=, Driver=ftdi_sio, 480M
>> > |__ Port 1: Dev 2, If 2, Class=, Driver=ftdi_sio, 480M
>> > |__ Port 1: Dev 2, If 3, Class=, Driver=ftdi_sio, 480M
>> >
>> >>>> hub, that is attached to one of the musb ports. So far the test was
>> >>>> successful for several hours. But I've seen following warnings:
>> >>>>
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_ep_program 931: broken !rx_reinit, ep5 csr 0203
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_ep_program 931: broken !rx_reinit, ep5 csr 0003
>> >>>> musb_host_rx 1973: Rx interrupt with no errors or packet!
>> >>>> musb_ep_program 931: broken !rx_reinit, ep7 csr 0003
>> >>>>
>> >>>> Is this expected behavior?
>> >>>
>> >>> no, that shouldn't happen, but it does and, apparently, in more than one
>> >>> implementation. Wondering if you're running into endpoint limitation due
>> >>> to MUSB's poor transfer scheduling for non-bulk endpoints.
>
> To add more:
> kernel 4.2.0 on AM3703 musb in DMA mode with Quectel U15 modem plugged:
> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
> |__ Port 4: Dev 3, If 0, Class=Vendor Specific Class, Driver=option, 480M
> |__ Port 4: Dev 3, If 1, Class=Vendor Specific Class, Driver=option, 480M
> |__ Port 4: Dev 3, If 2, Class=Vendor Specific Class, Driver=option, 480M
> |__ Port 4: Dev 3, If 3, Class=Vendor Specific Class, Driver=option, 480M
> |__ Port 4: Dev 3, If 4, Class=Vendor Specific Class, Driver=option, 480M
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-omap/3p, 480M
>
> musb_ep_program 931: broken !rx_reinit, ep2 csr a203
> musb_host_rx 1973: Rx interrupt with no errors or packet!
> musb_ep_program 931: broken !rx_reinit, ep5 csr a203
> musb_host_rx 1973: Rx interrupt with no errors or packet!
>
> and in both PIO and DMA mode write to device ends this way:
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 146 at drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo+0x84/0xb8()
> Could not flush host TX2 fifo: csr: 2003
> Modules linked in: option usb_wwan usbserial snd_soc_omap_twl4030 cpufreq_dt snd_soc_omap_mcbsp snd_soc_omap snd_soc_twl4030 snd_pcm_dmaengine omap_aes snd_soc_core omap_sham omap_mailbox s
> CPU: 0 PID: 146 Comm: ModemManager Not tainted 4.2.0 #3
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0013ad4>] (unwind_backtrace) from [<c0011be8>] (show_stack+0x10/0x14)
> [<c0011be8>] (show_stack) from [<c003181c>] (warn_slowpath_common+0x84/0xac)
> [<c003181c>] (warn_slowpath_common) from [<c0031870>] (warn_slowpath_fmt+0x2c/0x3c)
> [<c0031870>] (warn_slowpath_fmt) from [<c02e6a64>] (musb_h_tx_flush_fifo+0x84/0xb8)
> [<c02e6a64>] (musb_h_tx_flush_fifo) from [<c02e7ee0>] (musb_cleanup_urb.isra.13+0xa0/0x12c)
> [<c02e7ee0>] (musb_cleanup_urb.isra.13) from [<c02e8060>] (musb_urb_dequeue+0xf4/0x114)
> [<c02e8060>] (musb_urb_dequeue) from [<c02cdda0>] (usb_hcd_unlink_urb+0x60/0x7c)
> [<c02cdda0>] (usb_hcd_unlink_urb) from [<c02ceb9c>] (usb_kill_urb+0x4c/0xc4)
> [<c02ceb9c>] (usb_kill_urb) from [<bf1638d8>] (usb_wwan_close+0x94/0xb0 [usb_wwan])
> [<bf1638d8>] (usb_wwan_close [usb_wwan]) from [<c025d0cc>] (tty_port_shutdown+0x7c/0x88)
> [<c025d0cc>] (tty_port_shutdown) from [<c025d9a0>] (tty_port_close+0x24/0x58)
> [<c025d9a0>] (tty_port_close) from [<c0256494>] (tty_release+0x128/0x40c)
> [<c0256494>] (tty_release) from [<c00c9aa0>] (__fput+0xd4/0x1a4)
> [<c00c9aa0>] (__fput) from [<c004937c>] (task_work_run+0x9c/0xb0)
> [<c004937c>] (task_work_run) from [<c0011688>] (do_work_pending+0xa0/0xb8)
> [<c0011688>] (do_work_pending) from [<c000e904>] (work_pending+0xc/0x20)
> ---[ end trace b14c1d9333664980 ]---
>
> and device (U15) does not work. Also any other device pluged into that hub
> after warning is printed does not work any more (udlfb worked before).
>
> Just for completeness, here's a patch used:
> --- linux-4.2/drivers/usb/serial/option.c.orig 2015-10-13 02:43:23.363254239 +0200
> +++ linux-4.2/drivers/usb/serial/option.c 2015-10-13 02:44:24.663254239 +0200
> @@ -1097,6 +1097,7 @@
> { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
> { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
> { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
> + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9090)}, /* QUECTEL UC15 */
> { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff),
> .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */
> { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x9041, 0xff),
>
>> Now I have another trouble with msub and FTDI FT4232H chip. If I start
>> something like this on all 4 ports at 115200b/s, then pull USB cable
>> and the system freezes:
>>
>> cat /dev/urandom > /dev/ttyUSB0
>> ...
>> cat /dev/urandom > /dev/ttyUSB3
>>
>> I see these messages:
>>
>> ftdi_sio ttyUSB3: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB1: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB2: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB3: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB0: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB1: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB2: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>> ftdi_sio ttyUSB3: usb_serial_generic_write_bulk_callback - nonzero urb
>> status: -110
>>
>> After them system reboots as my watchdog time expires.
>>
>> Kernel 4.2.0-rc5
>>
>> Older FTDI chips like FT2232 have no problems. Somehow is musb really
>> allergic to FTDI and vice versa :-(
>
> That probably depends on transfer size...
Have another musb crash, when I insert TP-Link MA260. Crash log with linux-4.3.3
usb 1-1.2: new high-speed USB device number 9 using musb-hdrc
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi host12: usb-storage 1-1.2:1.0
usb 1-1.2: USB disconnect, device number 9
usb 1-1.2: new high-speed USB device number 10 using musb-hdrc
option 1-1.2:1.0: GSM modem (1-port) converter detected
usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
option 1-1.2:1.1: GSM modem (1-port) converter detected
usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
usb-storage 1-1.2:1.2: USB Mass Storage device detected
scsi host13: usb-storage 1-1.2:1.2
option 1-1.2:1.3: GSM modem (1-port) converter detected
usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
qmi_wwan 1-1.2:1.4: cdc-wdm0: USB WDM device
qmi_wwan 1-1.2:1.4 wwan0: register 'qmi_wwan' at
usb-musb-hdrc.0.auto-1.2, WWAN/QMI device, 26:ff:72:84:92:10
scsi 13:0:0:0: CD-ROM TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2
scsi 13:0:0:1: Direct-Access TP-LINK MMC Storage 2.31 PQ: 0 ANSI: 2
sd 13:0:0:1: [sda] Attached SCSI removable disk
#
#
# m------------[ cut here ]------------
WARNING: CPU: 0 PID: 897 at drivers/usb/musb/musb_host.c:128
musb_h_tx_flush_fifo+0xc4/0xe4()
Could not flush host TX2 fifo: csr: 2403
Modules linked in: musb_dsps musb_am335x
CPU: 0 PID: 897 Comm: ModemManager Not tainted 4.3.3 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0017bfc>] (unwind_backtrace) from [<c0013f3c>] (show_stack+0x10/0x14)
[<c0013f3c>] (show_stack) from [<c02b247c>] (dump_stack+0x84/0x9c)
[<c02b247c>] (dump_stack) from [<c003db70>] (warn_slowpath_common+0x7c/0xb8)
[<c003db70>] (warn_slowpath_common) from [<c003dbdc>]
(warn_slowpath_fmt+0x30/0x40)
[<c003dbdc>] (warn_slowpath_fmt) from [<c0412a54>]
(musb_h_tx_flush_fifo+0xc4/0xe4)
[<c0412a54>] (musb_h_tx_flush_fifo) from [<c0413e78>]
(musb_cleanup_urb+0xbc/0x130)
[<c0413e78>] (musb_cleanup_urb) from [<c04144f4>] (musb_urb_dequeue+0xf0/0x128)
[<c04144f4>] (musb_urb_dequeue) from [<c03e3544>] (usb_hcd_unlink_urb+0x50/0x84)
[<c03e3544>] (usb_hcd_unlink_urb) from [<c03e4788>] (usb_kill_urb+0x4c/0xc4)
[<c03e4788>] (usb_kill_urb) from [<c040e794>] (usb_wwan_close+0xbc/0xf0)
[<c040e794>] (usb_wwan_close) from [<c030cbb4>] (tty_port_shutdown+0x90/0x9c)
[<c030cbb4>] (tty_port_shutdown) from [<c030d2f8>] (tty_port_close+0x24/0x4c)
[<c030d2f8>] (tty_port_close) from [<c0304d9c>] (tty_release+0xec/0x4b8)
[<c0304d9c>] (tty_release) from [<c0145b74>] (__fput+0x80/0x1d0)
[<c0145b74>] (__fput) from [<c005c24c>] (task_work_run+0x8c/0xc0)
[<c005c24c>] (task_work_run) from [<c0013904>] (do_work_pending+0x8c/0xb4)
[<c0013904>] (do_work_pending) from [<c000f7e8>] (slow_work_pending+0xc/0x20)
---[ end trace 951f2d08e0a22b2a ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 897 at drivers/usb/musb/musb_host.c:128
musb_h_tx_flush_fifo+0xc4/0xe4()
Could not flush host TX2 fifo: csr: 2403
Modules linked in: musb_dsps musb_am335x
CPU: 0 PID: 897 Comm: ModemManager Tainted: G W 4.3.3 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0017bfc>] (unwind_backtrace) from [<c0013f3c>] (show_stack+0x10/0x14)
[<c0013f3c>] (show_stack) from [<c02b247c>] (dump_stack+0x84/0x9c)
[<c02b247c>] (dump_stack) from [<c003db70>] (warn_slowpath_common+0x7c/0xb8)
[<c003db70>] (warn_slowpath_common) from [<c003dbdc>]
(warn_slowpath_fmt+0x30/0x40)
[<c003dbdc>] (warn_slowpath_fmt) from [<c0412a54>]
(musb_h_tx_flush_fifo+0xc4/0xe4)
[<c0412a54>] (musb_h_tx_flush_fifo) from [<c04137b8>]
(musb_start_urb+0x970/0xd24)
[<c04137b8>] (musb_start_urb) from [<c0413e5c>] (musb_cleanup_urb+0xa0/0x130)
[<c0413e5c>] (musb_cleanup_urb) from [<c04144f4>] (musb_urb_dequeue+0xf0/0x128)
[<c04144f4>] (musb_urb_dequeue) from [<c03e3544>] (usb_hcd_unlink_urb+0x50/0x84)
[<c03e3544>] (usb_hcd_unlink_urb) from [<c03e4788>] (usb_kill_urb+0x4c/0xc4)
[<c03e4788>] (usb_kill_urb) from [<c040e794>] (usb_wwan_close+0xbc/0xf0)
[<c040e794>] (usb_wwan_close) from [<c030cbb4>] (tty_port_shutdown+0x90/0x9c)
[<c030cbb4>] (tty_port_shutdown) from [<c030d2f8>] (tty_port_close+0x24/0x4c)
[<c030d2f8>] (tty_port_close) from [<c0304d9c>] (tty_release+0xec/0x4b8)
[<c0304d9c>] (tty_release) from [<c0145b74>] (__fput+0x80/0x1d0)
[<c0145b74>] (__fput) from [<c005c24c>] (task_work_run+0x8c/0xc0)
[<c005c24c>] (task_work_run) from [<c0013904>] (do_work_pending+0x8c/0xb4)
[<c0013904>] (do_work_pending) from [<c000f7e8>] (slow_work_pending+0xc/0x20)
---[ end trace 951f2d08e0a22b2b ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 897 at drivers/usb/musb/musb_host.c:128
musb_h_tx_flush_fifo+0xc4/0xe4()
Could not flush host TX2 fifo: csr: 2403
Modules linked in: musb_dsps musb_am335x
CPU: 0 PID: 897 Comm: ModemManager Tainted: G W 4.3.3 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0017bfc>] (unwind_backtrace) from [<c0013f3c>] (show_stack+0x10/0x14)
[<c0013f3c>] (show_stack) from [<c02b247c>] (dump_stack+0x84/0x9c)
[<c02b247c>] (dump_stack) from [<c003db70>] (warn_slowpath_common+0x7c/0xb8)
[<c003db70>] (warn_slowpath_common) from [<c003dbdc>]
(warn_slowpath_fmt+0x30/0x40)
[<c003dbdc>] (warn_slowpath_fmt) from [<c0412a54>]
(musb_h_tx_flush_fifo+0xc4/0xe4)
[<c0412a54>] (musb_h_tx_flush_fifo) from [<c0413e78>]
(musb_cleanup_urb+0xbc/0x130)
[<c0413e78>] (musb_cleanup_urb) from [<c04144f4>] (musb_urb_dequeue+0xf0/0x128)
[<c04144f4>] (musb_urb_dequeue) from [<c03e3544>] (usb_hcd_unlink_urb+0x50/0x84)
[<c03e3544>] (usb_hcd_unlink_urb) from [<c03e4788>] (usb_kill_urb+0x4c/0xc4)
[<c03e4788>] (usb_kill_urb) from [<c040e794>] (usb_wwan_close+0xbc/0xf0)
[<c040e794>] (usb_wwan_close) from [<c030cbb4>] (tty_port_shutdown+0x90/0x9c)
[<c030cbb4>] (tty_port_shutdown) from [<c030d2f8>] (tty_port_close+0x24/0x4c)
[<c030d2f8>] (tty_port_close) from [<c0304d9c>] (tty_release+0xec/0x4b8)
[<c0304d9c>] (tty_release) from [<c0145b74>] (__fput+0x80/0x1d0)
[<c0145b74>] (__fput) from [<c005c24c>] (task_work_run+0x8c/0xc0)
[<c005c24c>] (task_work_run) from [<c0013904>] (do_work_pending+0x8c/0xb4)
[<c0013904>] (do_work_pending) from [<c000f7e8>] (slow_work_pending+0xc/0x20)
---[ end trace 951f2d08e0a22b2c ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 897 at drivers/usb/musb/musb_host.c:128
musb_h_tx_flush_fifo+0xc4/0xe4()
Could not flush host TX2 fifo: csr: 2403
Modules linked in: musb_dsps musb_am335x
CPU: 0 PID: 897 Comm: ModemManager Tainted: G W 4.3.3 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0017bfc>] (unwind_backtrace) from [<c0013f3c>] (show_stack+0x10/0x14)
[<c0013f3c>] (show_stack) from [<c02b247c>] (dump_stack+0x84/0x9c)
[<c02b247c>] (dump_stack) from [<c003db70>] (warn_slowpath_common+0x7c/0xb8)
[<c003db70>] (warn_slowpath_common) from [<c003dbdc>]
(warn_slowpath_fmt+0x30/0x40)
[<c003dbdc>] (warn_slowpath_fmt) from [<c0412a54>]
(musb_h_tx_flush_fifo+0xc4/0xe4)
[<c0412a54>] (musb_h_tx_flush_fifo) from [<c04137b8>]
(musb_start_urb+0x970/0xd24)
[<c04137b8>] (musb_start_urb) from [<c0413e5c>] (musb_cleanup_urb+0xa0/0x130)
[<c0413e5c>] (musb_cleanup_urb) from [<c04144f4>] (musb_urb_dequeue+0xf0/0x128)
[<c04144f4>] (musb_urb_dequeue) from [<c03e3544>] (usb_hcd_unlink_urb+0x50/0x84)
[<c03e3544>] (usb_hcd_unlink_urb) from [<c03e4788>] (usb_kill_urb+0x4c/0xc4)
[<c03e4788>] (usb_kill_urb) from [<c040e794>] (usb_wwan_close+0xbc/0xf0)
[<c040e794>] (usb_wwan_close) from [<c030cbb4>] (tty_port_shutdown+0x90/0x9c)
[<c030cbb4>] (tty_port_shutdown) from [<c030d2f8>] (tty_port_close+0x24/0x4c)
[<c030d2f8>] (tty_port_close) from [<c0304d9c>] (tty_release+0xec/0x4b8)
[<c0304d9c>] (tty_release) from [<c0145b74>] (__fput+0x80/0x1d0)
[<c0145b74>] (__fput) from [<c005c24c>] (task_work_run+0x8c/0xc0)
[<c005c24c>] (task_work_run) from [<c0013904>] (do_work_pending+0x8c/0xb4)
[<c0013904>] (do_work_pending) from [<c000f7e8>] (slow_work_pending+0xc/0x20)
---[ end trace 951f2d08e0a22b2d ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 897 at drivers/usb/musb/musb_host.c:128
musb_h_tx_flush_fifo+0xc4/0xe4()
Could not flush host TX2 fifo: csr: 2403
Modules linked in: musb_dsps musb_am335x
CPU: 0 PID: 897 Comm: ModemManager Tainted: G W 4.3.3 #1
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0017bfc>] (unwind_backtrace) from [<c0013f3c>] (show_stack+0x10/0x14)
[<c0013f3c>] (show_stack) from [<c02b247c>] (dump_stack+0x84/0x9c)
[<c02b247c>] (dump_stack) from [<c003db70>] (warn_slowpath_common+0x7c/0xb8)
[<c003db70>] (warn_slowpath_common) from [<c003dbdc>]
(warn_slowpath_fmt+0x30/0x40)
[<c003dbdc>] (warn_slowpath_fmt) from [<c0412a54>]
(musb_h_tx_flush_fifo+0xc4/0xe4)
[<c0412a54>] (musb_h_tx_flush_fifo) from [<c0413e78>]
(musb_cleanup_urb+0xbc/0x130)
[<c0413e78>] (musb_cleanup_urb) from [<c04144f4>] (musb_urb_dequeue+0xf0/0x128)
[<c04144f4>] (musb_urb_dequeue) from [<c03e3544>] (usb_hcd_unlink_urb+0x50/0x84)
[<c03e3544>] (usb_hcd_unlink_urb) from [<c03e4788>] (usb_kill_urb+0x4c/0xc4)
[<c03e4788>] (usb_kill_urb) from [<c040e794>] (usb_wwan_close+0xbc/0xf0)
[<c040e794>] (usb_wwan_close) from [<c030cbb4>] (tty_port_shutdown+0x90/0x9c)
[<c030cbb4>] (tty_port_shutdown) from [<c030d2f8>] (tty_port_close+0x24/0x4c)
[<c030d2f8>] (tty_port_close) from [<c0304d9c>] (tty_release+0xec/0x4b8)
[<c0304d9c>] (tty_release) from [<c0145b74>] (__fput+0x80/0x1d0)
[<c0145b74>] (__fput) from [<c005c24c>] (task_work_run+0x8c/0xc0)
[<c005c24c>] (task_work_run) from [<c0013904>] (do_work_pending+0x8c/0xb4)
[<c0013904>] (do_work_pending) from [<c000f7e8>] (slow_work_pending+0xc/0x20)
---[ end trace 951f2d08e0a22b2e ]---
Could you please look at this?
Thanks.
Yegor
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
