On 25.09.09 20:22, Uros Vampl wrote:
> On 25.09.09 13:41, Devin Heitmueller wrote:
> > >> Interesting. Have you tried the A/V inputs (as opposed to the tuner)?
> > >> That might help us identify whether it's an issue with the xc3028
> > >> tuner chip extracting the audio carrier or whether it's something
> > >> about the way we are programming the emp202.
> > >
> > >
> > > Hello,
> > >
> > > That was a great idea. Tested with a Playstation2 and audio is ok. It's
> > > just TV input that has a problem. So I guess that means the issue is
> > > with the tuner chip. That's progress. Where do I go from here?
> >
> > Ok, that's good to hear. What video standard specifically are you
> > using? I suspect the core issue is that the application is not
> > properly specifying the video standard, which results in the xc3028
> > improperly decoding the audio (the xc3028 needs to know exactly what
> > standard is being used).
>
> I'm from Slovenia, which is a PAL-B country. Tvtime can be set to either
> PAL-BG, PAL-DK or PAL-I, makes no difference. MPlayer has a whole bunch
> of options (PAL, PAL-BG, etc...), but again none of them make a
> difference.
>
> When the app is started, this appears in dmesg:
>
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
> (0), id 00000000000000ff:
> xc2028 4-0061: Loading firmware for type=(0), id 0000000100000007.
> xc2028 4-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
Alright, success!!!
Since it seems everything for this tuner is set up the same as for the
Hauppauge WinTV HVR 900, I figured let's set things up *exactly* the
same. So, like it's there for the Hauppauge, I added .mts_firmware = 1
to the definition of the hybrid XS em2882. And well, working TV audio!!
dmesg output this time:
xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
MTS (4), id 00000000000000ff:
xc2028 4-0061: Loading firmware for type=MTS (4), id 0000000100000007.
So now with the attached patch, everything (analog, digital, remote)
works!
Regards,
Uroš
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 19 09:45:22 2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c Sat Sep 26 00:06:37 2009 +0200
@@ -1441,11 +1441,12 @@
.valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
-#if 0 /* FIXME: add an entry at em28xx-dvb */
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
-#endif
+ .ir_codes = &ir_codes_terratec_cinergy_xs_table,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -2119,6 +2120,7 @@
switch (dev->model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
diff -r 29e4ba1a09bc linux/drivers/media/video/em28xx/em28xx-dvb.c
--- a/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 19 09:45:22 2009 -0300
+++ b/linux/drivers/media/video/em28xx/em28xx-dvb.c Sat Sep 26 00:06:37 2009 +0200
@@ -494,6 +494,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
