On 7/19/24 01:02, Mudit Sharma wrote:
Add support for BH1745, which is an I2C colour sensor with red, green,
blue and clear channels. It has a programmable active low interrupt
pin. Interrupt occurs when the signal from the selected interrupt
source channel crosses set interrupt threshold high or low level.
Interrupt source for the device can be configured by enabling the
corresponding event. Interrupt latch is always enabled when setting
up interrupt.
Add myself as the maintainer for this driver in MAINTAINERS.
Signed-off-by: Mudit Sharma <muditsharma.info@xxxxxxxxx>
Reviewed-by: Ivan Orlov <ivan.orlov0322@xxxxxxxxx>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
Hi Mudit & All :)
I know I am late. The series has already been applied (thanks
Jonathan!). I've mostly been offline for the last 1.5 months or so -
"all work and no play makes Jack a dull boy", you know ;)
Anyways, as Jonathan asked me to take a look at the GTS stuff (at v7), I
tried to quickly glance at this. It looks good to me!
Well, the real test will be the users of the sensor driver - so please
let us know if GTS stuff brings problems to users. I am mostly
interested in knowing if gain changes caused by integration time changes
are handled gracefully by the users. :) Well, seeing there is no
per-channel gain or integration time setting, you should be safe from
the worst side-effects :)
Nice driver!
Yours,
-- Matti
--
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland
~~ When things go utterly wrong vim users can always type :help! ~~
