January 30, 2023 4:39 AM, "Damien Le Moal" <damien.lemoal@xxxxxxxxxxxxxxxxxx> wrote:
>
> Apologies for asking you to test again, but could you try this simpler
> version of the initial tweak:
>
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 884ae73b11ea..2ea572628b1c 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -3109,7 +3109,7 @@ int sata_down_spd_limit(struct ata_link *link, u32
> spd_limit)
> */
> if (spd > 1)
> mask &= (1 << (spd - 1)) - 1;
> - else
> + else if (link->sata_spd)
> return -EINVAL;
>
> /* were we already at the bottom? */
>
> This is a partial revert of the commit that created the issue in the
> first place. But better check this is OK.
>
> --
> Damien Le Moal
> Western Digital Research
No problem. I'll test everything until you find the best possible fix for the kernel.
It works:
[ 15.805656][ T113] hardreset, Online=>Offline
[ 15.805666][ T113] sata_set_spd_needed, scontrol=0x300
[ 15.810139][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 15.815417][ T113] __sata_set_spd_needed, corrected limit=0xFFFFFFFF
[ 15.821719][ T113] __sata_set_spd_needed, target=0x0
[ 15.828208][ T113] __sata_set_spd_needed, spd=0x0
[ 15.833289][ T113] __sata_set_spd_needed, final *scontrol=0x300
[ 15.839192][ T113] resume, do loop
[ 16.073861][ T113] resume, after do loop
[ 16.133861][ T113] debounce, SCR=0x100
[ 16.193860][ T113] debounce, SCR=0x100
[ 16.253860][ T113] debounce, SCR=0x100
[ 16.313860][ T113] debounce, SCR=0x100
[ 16.373861][ T113] debounce, SCR=0x100
[ 16.433860][ T113] debounce, SCR=0x100
[ 16.493860][ T113] debounce, SCR=0x100
[ 16.553882][ T113] debounce, SCR=0x100
[ 16.613861][ T113] debounce, SCR=0x100
[ 16.617722][ T113] resume, return at end of function
[ 16.621581][ T113] hardreset, ata_phys_link_offline check failed
[ 16.626685][ T113] ata2: SATA link down (SStatus 101 SControl 300)
[ 16.639152][ T113] sata_down_spd_limit: limit 0x1, cur spd 0x0, saved limit 0xffffffff, hw limit 0xffffffff
[ 16.649046][ T113] ata2: limiting SATA link speed to 1.5 Gbps
[ 16.654931][ T113] hardreset, Online=>Offline
[ 16.654937][ T113] sata_set_spd_needed, scontrol=0x300
[ 16.659407][ T113] __sata_set_spd_needed, initial limit=0x1
[ 16.664675][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 16.670364][ T113] __sata_set_spd_needed, target=0x1
[ 16.676249][ T113] __sata_set_spd_needed, spd=0x0
[ 16.681329][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 16.686160][ T113] __sata_set_spd_needed, initial limit=0x1
[ 16.692200][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 16.697902][ T113] __sata_set_spd_needed, target=0x1
[ 16.703767][ T113] __sata_set_spd_needed, spd=0x0
[ 16.708858][ T113] __sata_set_spd_needed, final *scontrol=0x314
[ 16.714748][ T113] resume, do loop
[ 16.943861][ T113] resume, after do loop
[ 17.003861][ T113] debounce, SCR=0x113
[ 17.063882][ T113] debounce, SCR=0x113
[ 17.123860][ T113] debounce, SCR=0x113
[ 17.183861][ T113] debounce, SCR=0x113
[ 17.243860][ T113] debounce, SCR=0x113
[ 17.303861][ T113] debounce, SCR=0x113
[ 17.363860][ T113] debounce, SCR=0x113
[ 17.423860][ T113] debounce, SCR=0x113
[ 17.483860][ T113] debounce, SCR=0x113
[ 17.487721][ T113] resume, return at end of function
[ 17.491580][ T113] hardreset, Offline=>Online
[ 17.501142][ T113] hardreset, sata_pmp_supported, before check_ready
[ 17.673864][ T113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.687589][ T113] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
[ 17.696209][ T113] device: 'link2.0': device_add
[ 17.701015][ T113] device: 'link2.0': device_add
[ 17.706001][ T113] device: 'dev2.0.0': device_add
[ 17.710846][ T113] device: 'dev2.0.0': device_add
[ 17.715847][ T113] device: 'link2.1': device_add
[ 17.720606][ T113] device: 'link2.1': device_add
[ 17.725467][ T113] device: 'dev2.1.0': device_add
[ 17.730312][ T113] device: 'dev2.1.0': device_add
[ 17.735299][ T113] device: 'link2.2': device_add
[ 17.740056][ T113] device: 'link2.2': device_add
[ 17.744909][ T113] device: 'dev2.2.0': device_add
[ 17.749754][ T113] device: 'dev2.2.0': device_add
[ 17.754725][ T113] device: 'link2.3': device_add
[ 17.759483][ T113] device: 'link2.3': device_add
[ 17.764355][ T113] device: 'dev2.3.0': device_add
[ 17.769200][ T113] device: 'dev2.3.0': device_add
[ 17.774175][ T113] device: 'link2.4': device_add
[ 17.778934][ T113] device: 'link2.4': device_add
[ 17.783773][ T113] device: 'dev2.4.0': device_add
[ 17.788635][ T113] device: 'dev2.4.0': device_add
[ 17.793605][ T113] device: 'link2.5': device_add
[ 17.798397][ T113] device: 'link2.5': device_add
[ 17.803238][ T113] device: 'dev2.5.0': device_add
[ 17.808100][ T113] device: 'dev2.5.0': device_add
[ 17.813066][ T113] device: 'link2.6': device_add
[ 17.817848][ T113] device: 'link2.6': device_add
[ 17.822690][ T113] device: 'dev2.6.0': device_add
[ 17.827552][ T113] device: 'dev2.6.0': device_add
[ 17.832512][ T113] device: 'link2.7': device_add
[ 17.837289][ T113] device: 'link2.7': device_add
[ 17.842138][ T113] device: 'dev2.7.0': device_add
[ 17.847004][ T113] device: 'dev2.7.0': device_add
[ 17.851966][ T113] device: 'link2.8': device_add
[ 17.856752][ T113] device: 'link2.8': device_add
[ 17.861597][ T113] device: 'dev2.8.0': device_add
[ 17.866464][ T113] device: 'dev2.8.0': device_add
[ 17.871435][ T113] device: 'link2.9': device_add
[ 17.876216][ T113] device: 'link2.9': device_add
[ 17.881061][ T113] device: 'dev2.9.0': device_add
[ 17.885928][ T113] device: 'dev2.9.0': device_add
[ 17.890893][ T113] device: 'link2.10': device_add
[ 17.895761][ T113] device: 'link2.10': device_add
[ 17.900708][ T113] device: 'dev2.10.0': device_add
[ 17.905665][ T113] device: 'dev2.10.0': device_add
[ 17.910720][ T113] device: 'link2.11': device_add
[ 17.915597][ T113] device: 'link2.11': device_add
[ 17.920539][ T113] device: 'dev2.11.0': device_add
[ 17.925497][ T113] device: 'dev2.11.0': device_add
[ 17.930558][ T113] device: 'link2.12': device_add
[ 17.935429][ T113] device: 'link2.12': device_add
[ 17.940366][ T113] device: 'dev2.12.0': device_add
[ 17.945324][ T113] device: 'dev2.12.0': device_add
[ 17.950393][ T113] device: 'link2.13': device_add
[ 17.955265][ T113] device: 'link2.13': device_add
[ 17.960203][ T113] device: 'dev2.13.0': device_add
[ 17.965163][ T113] device: 'dev2.13.0': device_add
[ 17.970219][ T113] device: 'link2.14': device_add
[ 17.975099][ T113] device: 'link2.14': device_add
[ 17.980046][ T113] device: 'dev2.14.0': device_add
[ 17.985007][ T113] device: 'dev2.14.0': device_add
[ 17.990061][ T113] ahci-mvebu f10a8000.sata: FBS is enabled
[ 17.995812][ T113] ata2.00: SCR_CONTROL = 0x300
[ 18.000492][ T113] ata2.01: SCR_CONTROL = 0x300
[ 18.005195][ T113] ata2.02: SCR_CONTROL = 0x300
[ 18.009873][ T113] ata2.03: SCR_CONTROL = 0x300
[ 18.014580][ T113] ata2.04: SCR_CONTROL = 0x300
[ 18.019257][ T113] ata2.05: SCR_CONTROL = 0x300
[ 18.023998][ T113] ata2.06: SCR_CONTROL = 0x300
[ 18.028676][ T113] ata2.07: SCR_CONTROL = 0x300
[ 18.033427][ T113] ata2.00: hard resetting link
[ 18.038105][ T113] hardreset, Online=>Offline
[ 18.038144][ T113] sata_set_spd_needed, scontrol=0x300
[ 18.042615][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.047892][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.054208][ T113] __sata_set_spd_needed, target=0x1
[ 18.060072][ T113] __sata_set_spd_needed, spd=0x0
[ 18.065164][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.070076][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.076145][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.082447][ T113] __sata_set_spd_needed, target=0x1
[ 18.088325][ T113] __sata_set_spd_needed, spd=0x0
[ 18.093406][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.099473][ T113] resume, do loop
[ 18.333896][ T113] resume, after do loop
[ 18.342538][ T113] debounce, SCR=0x123
[ 18.351693][ T113] debounce, SCR=0x123
[ 18.360674][ T113] debounce, SCR=0x123
[ 18.369653][ T113] debounce, SCR=0x123
[ 18.378614][ T113] debounce, SCR=0x123
[ 18.387574][ T113] debounce, SCR=0x123
[ 18.396533][ T113] debounce, SCR=0x123
[ 18.405493][ T113] debounce, SCR=0x123
[ 18.414452][ T113] debounce, SCR=0x123
[ 18.423411][ T113] debounce, SCR=0x123
[ 18.432390][ T113] debounce, SCR=0x123
[ 18.441371][ T113] debounce, SCR=0x123
[ 18.445312][ T113] resume, return at end of function
[ 18.449202][ T113] hardreset, Offline=>Online
[ 18.458767][ T113] hardreset, after check_ready
[ 18.458984][ T113] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.470857][ T113] ata2.01: hard resetting link
[ 18.475524][ T113] hardreset, Online=>Offline
[ 18.475562][ T113] sata_set_spd_needed, scontrol=0x300
[ 18.480032][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.485305][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.491606][ T113] __sata_set_spd_needed, target=0x1
[ 18.497484][ T113] __sata_set_spd_needed, spd=0x0
[ 18.502564][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.507488][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.513527][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.519847][ T113] __sata_set_spd_needed, target=0x1
[ 18.525725][ T113] __sata_set_spd_needed, spd=0x0
[ 18.530804][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.536834][ T113] resume, do loop
[ 18.763894][ T113] resume, after do loop
[ 18.772537][ T113] debounce, SCR=0x123
[ 18.781691][ T113] debounce, SCR=0x123
[ 18.790671][ T113] debounce, SCR=0x123
[ 18.799650][ T113] debounce, SCR=0x123
[ 18.808610][ T113] debounce, SCR=0x123
[ 18.817570][ T113] debounce, SCR=0x123
[ 18.826530][ T113] debounce, SCR=0x123
[ 18.835489][ T113] debounce, SCR=0x123
[ 18.844448][ T113] debounce, SCR=0x123
[ 18.853407][ T113] debounce, SCR=0x123
[ 18.862386][ T113] debounce, SCR=0x123
[ 18.871368][ T113] debounce, SCR=0x123
[ 18.875309][ T113] resume, return at end of function
[ 18.879199][ T113] hardreset, Offline=>Online
[ 18.888761][ T113] hardreset, after check_ready
[ 18.888978][ T113] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.900849][ T113] ata2.02: hard resetting link
[ 18.905516][ T113] hardreset, Online=>Offline
[ 18.905554][ T113] sata_set_spd_needed, scontrol=0x300
[ 18.910024][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.915297][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.921598][ T113] __sata_set_spd_needed, target=0x1
[ 18.927476][ T113] __sata_set_spd_needed, spd=0x0
[ 18.932555][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.937478][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 18.943517][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 18.949837][ T113] __sata_set_spd_needed, target=0x1
[ 18.955715][ T113] __sata_set_spd_needed, spd=0x0
[ 18.960794][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 18.966826][ T113] resume, do loop
[ 19.193895][ T113] resume, after do loop
[ 19.202536][ T113] debounce, SCR=0x0
[ 19.211691][ T113] debounce, SCR=0x0
[ 19.220496][ T113] debounce, SCR=0x0
[ 19.229301][ T113] debounce, SCR=0x0
[ 19.238087][ T113] debounce, SCR=0x0
[ 19.246872][ T113] debounce, SCR=0x0
[ 19.255658][ T113] debounce, SCR=0x0
[ 19.264443][ T113] debounce, SCR=0x0
[ 19.273228][ T113] debounce, SCR=0x0
[ 19.282034][ T113] debounce, SCR=0x0
[ 19.290839][ T113] debounce, SCR=0x0
[ 19.299646][ T113] debounce, SCR=0x0
[ 19.308430][ T113] debounce, SCR=0x0
[ 19.312175][ T113] resume, return at end of function
[ 19.315911][ T113] hardreset, ata_phys_link_offline check failed
[ 19.321203][ T113] ata2.02: SATA link down (SStatus 0 SControl 300)
[ 19.333802][ T113] ata2.03: hard resetting link
[ 19.338467][ T113] hardreset, Online=>Offline
[ 19.338504][ T113] sata_set_spd_needed, scontrol=0x300
[ 19.342974][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 19.348247][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 19.354562][ T113] __sata_set_spd_needed, target=0x1
[ 19.360426][ T113] __sata_set_spd_needed, spd=0x0
[ 19.365526][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 19.370436][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 19.376495][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 19.382796][ T113] __sata_set_spd_needed, target=0x1
[ 19.388674][ T113] __sata_set_spd_needed, spd=0x0
[ 19.393753][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 19.399778][ T113] resume, do loop
[ 19.633894][ T113] resume, after do loop
[ 19.642535][ T113] debounce, SCR=0x0
[ 19.651703][ T113] debounce, SCR=0x0
[ 19.660509][ T113] debounce, SCR=0x0
[ 19.669314][ T113] debounce, SCR=0x0
[ 19.678100][ T113] debounce, SCR=0x0
[ 19.686886][ T113] debounce, SCR=0x0
[ 19.695671][ T113] debounce, SCR=0x0
[ 19.704456][ T113] debounce, SCR=0x0
[ 19.713242][ T113] debounce, SCR=0x0
[ 19.722048][ T113] debounce, SCR=0x0
[ 19.730852][ T113] debounce, SCR=0x0
[ 19.739659][ T113] debounce, SCR=0x0
[ 19.748444][ T113] debounce, SCR=0x0
[ 19.752191][ T113] resume, return at end of function
[ 19.755927][ T113] hardreset, ata_phys_link_offline check failed
[ 19.761219][ T113] ata2.03: SATA link down (SStatus 0 SControl 300)
[ 19.773817][ T113] ata2.04: hard resetting link
[ 19.778481][ T113] hardreset, Online=>Offline
[ 19.778519][ T113] sata_set_spd_needed, scontrol=0x300
[ 19.782989][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 19.788262][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 19.794577][ T113] __sata_set_spd_needed, target=0x1
[ 19.800441][ T113] __sata_set_spd_needed, spd=0x0
[ 19.805541][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 19.810452][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 19.816511][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 19.822812][ T113] __sata_set_spd_needed, target=0x1
[ 19.828689][ T113] __sata_set_spd_needed, spd=0x0
[ 19.833769][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 19.839792][ T113] resume, do loop
[ 20.073895][ T113] resume, after do loop
[ 20.082536][ T113] debounce, SCR=0x0
[ 20.091690][ T113] debounce, SCR=0x0
[ 20.100496][ T113] debounce, SCR=0x0
[ 20.109301][ T113] debounce, SCR=0x0
[ 20.118087][ T113] debounce, SCR=0x0
[ 20.126872][ T113] debounce, SCR=0x0
[ 20.135658][ T113] debounce, SCR=0x0
[ 20.144443][ T113] debounce, SCR=0x0
[ 20.153228][ T113] debounce, SCR=0x0
[ 20.162047][ T113] debounce, SCR=0x0
[ 20.170854][ T113] debounce, SCR=0x0
[ 20.179660][ T113] debounce, SCR=0x0
[ 20.188447][ T113] debounce, SCR=0x0
[ 20.192193][ T113] resume, return at end of function
[ 20.195930][ T113] hardreset, ata_phys_link_offline check failed
[ 20.201220][ T113] ata2.04: SATA link down (SStatus 0 SControl 300)
[ 20.213818][ T113] ata2.05: hard resetting link
[ 20.218483][ T113] hardreset, Online=>Offline
[ 20.218520][ T113] sata_set_spd_needed, scontrol=0x300
[ 20.222990][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 20.228263][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 20.234578][ T113] __sata_set_spd_needed, target=0x1
[ 20.240442][ T113] __sata_set_spd_needed, spd=0x0
[ 20.245542][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 20.250452][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 20.256511][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 20.262812][ T113] __sata_set_spd_needed, target=0x1
[ 20.268689][ T113] __sata_set_spd_needed, spd=0x0
[ 20.273768][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 20.279792][ T113] resume, do loop
[ 20.513895][ T113] resume, after do loop
[ 20.522535][ T113] debounce, SCR=0x0
[ 20.531689][ T113] debounce, SCR=0x0
[ 20.540495][ T113] debounce, SCR=0x0
[ 20.549300][ T113] debounce, SCR=0x0
[ 20.558085][ T113] debounce, SCR=0x0
[ 20.566870][ T113] debounce, SCR=0x0
[ 20.575657][ T113] debounce, SCR=0x0
[ 20.584441][ T113] debounce, SCR=0x0
[ 20.593226][ T113] debounce, SCR=0x0
[ 20.602031][ T113] debounce, SCR=0x0
[ 20.610836][ T113] debounce, SCR=0x0
[ 20.619643][ T113] debounce, SCR=0x0
[ 20.628429][ T113] debounce, SCR=0x0
[ 20.632175][ T113] resume, return at end of function
[ 20.635911][ T113] hardreset, ata_phys_link_offline check failed
[ 20.641203][ T113] ata2.05: SATA link down (SStatus 0 SControl 300)
[ 20.653800][ T113] ata2.06: hard resetting link
[ 20.658466][ T113] hardreset, Online=>Offline
[ 20.658503][ T113] sata_set_spd_needed, scontrol=0x300
[ 20.662974][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 20.668261][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 20.674576][ T113] __sata_set_spd_needed, target=0x1
[ 20.680440][ T113] __sata_set_spd_needed, spd=0x0
[ 20.685539][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 20.690451][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 20.696510][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 20.702811][ T113] __sata_set_spd_needed, target=0x1
[ 20.708688][ T113] __sata_set_spd_needed, spd=0x0
[ 20.713768][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 20.719791][ T113] resume, do loop
[ 20.953895][ T113] resume, after do loop
[ 20.962536][ T113] debounce, SCR=0x0
[ 20.971690][ T113] debounce, SCR=0x0
[ 20.980496][ T113] debounce, SCR=0x0
[ 20.989301][ T113] debounce, SCR=0x0
[ 20.998087][ T113] debounce, SCR=0x0
[ 21.006872][ T113] debounce, SCR=0x0
[ 21.015657][ T113] debounce, SCR=0x0
[ 21.024442][ T113] debounce, SCR=0x0
[ 21.033227][ T113] debounce, SCR=0x0
[ 21.042033][ T113] debounce, SCR=0x0
[ 21.050838][ T113] debounce, SCR=0x0
[ 21.059644][ T113] debounce, SCR=0x0
[ 21.068429][ T113] debounce, SCR=0x0
[ 21.072176][ T113] resume, return at end of function
[ 21.075913][ T113] hardreset, ata_phys_link_offline check failed
[ 21.081202][ T113] ata2.06: SATA link down (SStatus 0 SControl 300)
[ 21.093800][ T113] ata2.07: hard resetting link
[ 21.098465][ T113] hardreset, Online=>Offline
[ 21.098502][ T113] sata_set_spd_needed, scontrol=0x300
[ 21.102972][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 21.108246][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 21.114560][ T113] __sata_set_spd_needed, target=0x1
[ 21.120424][ T113] __sata_set_spd_needed, spd=0x0
[ 21.125524][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 21.130435][ T113] __sata_set_spd_needed, initial limit=0xFFFFFFFF
[ 21.136494][ T113] __sata_set_spd_needed, corrected limit=0x1
[ 21.142795][ T113] __sata_set_spd_needed, target=0x1
[ 21.148673][ T113] __sata_set_spd_needed, spd=0x0
[ 21.153752][ T113] __sata_set_spd_needed, final *scontrol=0x310
[ 21.159775][ T113] resume, do loop
[ 21.393895][ T113] resume, after do loop
[ 21.402537][ T113] debounce, SCR=0x0
[ 21.411690][ T113] debounce, SCR=0x0
[ 21.420496][ T113] debounce, SCR=0x0
[ 21.429300][ T113] debounce, SCR=0x0
[ 21.438085][ T113] debounce, SCR=0x0
[ 21.446870][ T113] debounce, SCR=0x0
[ 21.455656][ T113] debounce, SCR=0x0
[ 21.464441][ T113] debounce, SCR=0x0
[ 21.473227][ T113] debounce, SCR=0x0
[ 21.482032][ T113] debounce, SCR=0x0
[ 21.490837][ T113] debounce, SCR=0x0
[ 21.499644][ T113] debounce, SCR=0x0
[ 21.508430][ T113] debounce, SCR=0x0
[ 21.512176][ T113] resume, return at end of function
[ 21.515913][ T113] hardreset, ata_phys_link_offline check failed
[ 21.521202][ T113] ata2.07: SATA link down (SStatus 0 SControl 300)
[ 21.533889][ T113] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
[ 21.541502][ T113] ata2.00: 976773168 sectors, multi 0: LBA48
[ 21.547615][ T113] ata2.00: configured for UDMA/133
[ 21.552677][ T113] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
[ 21.559611][ T113] ata2.01: 23437498368 sectors, multi 0: LBA48
[ 21.565886][ T113] ata2.01: configured for UDMA/133
[ 21.571033][ T113] ata2: EH complete
[ 21.575491][ T76] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
[ 21.585235][ T76] device: 'target1:0:0': device_add
[ 21.590356][ T76] bus: 'scsi': add device target1:0:0
[ 21.595735][ T76] device: '1:0:0:0': device_add
[ 21.600740][ T76] bus: 'scsi': add device 1:0:0:0
[ 21.605721][ T76] scsi 1:0:0:0: scheduling asynchronous probe
[ 21.611719][ T76] device: '1:0:0:0': device_add
[ 21.611734][ T22] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
[ 21.616593][ T76] device: '1:0:0:0': device_add
[ 21.625099][ T22] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
[ 21.637640][ T22] sd 1:0:0:0: no default pinctrl state
[ 21.643071][ T22] device: '1:0:0:0': device_add
[ 21.644450][ T76] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
[ 21.648193][ T22] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 21.657934][ T76] device: 'target1:1:0': device_add
[ 21.665225][ T22] sd 1:0:0:0: [sdb] Write Protect is off
[ 21.670030][ T76] bus: 'scsi': add device target1:1:0
[ 21.675566][ T22] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 21.680850][ T76] device: '1:1:0:0': device_add
[ 21.686703][ T22] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.691586][ T76] bus: 'scsi': add device 1:1:0:0
[ 21.701326][ T22] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 21.706077][ T76] scsi 1:1:0:0: scheduling asynchronous probe
[ 21.712958][ T22] device: 'sdb': device_add
[ 21.718923][ T76] device: '1:1:0:0': device_add
[ 21.723651][ T8] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
[ 21.728161][ T76] device: '1:1:0:0': device_add
[ 21.736660][ T8] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
[ 21.749211][ T8] sd 1:1:0:0: no default pinctrl state
[ 21.754659][ T8] device: '1:1:0:0': device_add
[ 21.759991][ T22] device: '8:16': device_add
[ 21.765576][ T8] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
[ 21.774242][ T8] sd 1:1:0:0: [sdc] Write Protect is off
[ 21.779764][ T8] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 21.785698][ T8] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.795680][ T8] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 21.802612][ T8] device: 'sdc': device_add
[ 21.807704][ T8] device: '8:32': device_add
[ 21.836417][ T8] sd 1:1:0:0: [sdc] Attached SCSI removable disk
[ 21.842641][ T8] driver: 'sd': driver_bound: bound to device '1:1:0:0'
[ 21.849545][ T8] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
[ 21.857027][ T8] sd 1:1:0:0: async probe completed
[ 22.253067][ T22] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 22.259320][ T22] driver: 'sd': driver_bound: bound to device '1:0:0:0'
[ 22.266220][ T22] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
[ 22.273664][ T22] sd 1:0:0:0: async probe completed
I also tested it with the latest kernel, no other modifications
(commit 6d796c50f84ca79f1722bb131799e5a5710c4700, tag: v6.2-rc6)
This is the boot log with Areca DAS already connected:
BootROM - 1.73
Booting from NAND flash
General initialization - Version: 1.0.0
Detected Device ID 6820
High speed PHY - Version: 2.0
Init RD NAS topology Serdes Lane 3 is USB3
Serdes Lane 4 is SGMII
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 06 | SATA0 |
| 1 | 05 | PCIe0 |
| 2 | 06 | SATA1 |
| 3 | 05 | USB3 HOST1 |
| 4 | 05 | PCIe1 |
| 5 | 00 | SGMII2 |
--------------------------------
:** Link is Gen1, check the EP capability
PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities
:** Link is Gen1, check the EP capability
PCIe, Idx 1: remains Gen1
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.26.0
mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
Not detected suspend to RAM indication
BootROM: Image checksum verification PASSED
l
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01 (Mar 27 2015 - 16:50:46) Marvell version: 2014_T3.0p6
Boot version : v1.0.13
Board: RD-NAS-88F6820-DDR3
SoC: MV88F6820 Rev A0
running 2 CPUs
CPU: ARM Cortex A9 MPCore (Rev 1) LE
CPU 0
CPU @ 1600 [MHz]
L2 @ 800 [MHz]
TClock @ 200 [MHz]
DDR @ 800 [MHz]
DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM: 512 MiB
Map: Code: 0x1fea9000:0x1ff7632c
BSS: 0x1ffef6b4
Stack: 0x1f9a8f20
Heap: 0x1f9a9000:0x1fea9000
raise: Signal # 8 caught
U-ENV offset == 0x200000
raise: Signal # 8 caught
U-ENV offset == 0x200000
U-Boot Environment: 0x00200000:0x00220000 (NAND)
NAND: 128 MiB
MMC: mv_sdh: 0
DEVINFO offset == 0x900000
U-ENV offset == 0x200000
U-ENV offset == 0x200000
S-ENV offset == 0x240000
#### auto_recovery ####
[u_env] get auto_recovery == yes
[u_env] get auto_recovery == yes
[u_env] get boot_part == 2
[u_env] get boot_part_ready == 3
auto_recovery enabled:1, boot_part:2, boot_part_ready:3
S-ENV offset == 0x240000
[boot_count_read] block:0x240000, size:128KB, records:64
[boot_count_read_record] boot_count:1, next_record:11
[boot_count_write] erase:0, auto_recovery->block_offset:0x240000 offset=0x245800
Updating boot_count ...
[boot_count_write] offset:0x245800 , length:2048
done
PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0
PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1
USB2.0 0: Host Mode
USB3.0 1: Host Mode
USB3.0 0: Host Mode
Board configuration detected:
mvEthE6171SwitchBasicInit init
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga0 | RGMII | 0x01 |
| egiga1 | SGMII | 0x00 |
egiga0 [PRIME], egiga1
auto_recovery_check changes bootcmd: run altnandboot
Hit any key to stop autoboot: 3
Marvell>> run bootcmd_tftp
Using egiga0 device
TFTP from server 192.168.1.254; our IP address is 192.168.1.1
Filename 'uImage'.
Load address: 0x2000000
Loading: * #################################################################
#################################################################
##########################################################
205.1 KiB/s
done
Bytes transferred = 2750299 (29f75b hex)
Starting kernel ...
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 6.2.0-rc6-M95D-00001-gd783bde80fb1 (marius95@GRAPHIM) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.2.0 r21391+9-a8f3c97ce8) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Mon Jan 30 09:02:19 EET 2023
[ 0.000000][ T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: Linksys WRT1900ACS
[ 0.000000][ T0] Memory policy: Data cache writealloc
[ 0.000000][ T0] Zone ranges:
[ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Movable zone start for each node
[ 0.000000][ T0] Early memory node ranges
[ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000][ T0] percpu: Embedded 13 pages/cpu s29648 r0 d23600 u53248
[ 0.000000][ T0] pcpu-alloc: s29648 r0 d23600 u53248 alloc=13*4096
[ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: console=ttyS0,115200 nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) root=/dev/sda rootdelay=100 dyndbg=\"file *ata* +plmft\"
[ 0.000000][ T0] Unknown kernel command line parameters "nfcConfig=4bitecc mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)", will be passed to user space.
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000][ T0] Memory: 503304K/524288K available (6144K kernel code, 682K rwdata, 1724K rodata, 1024K init, 6363K bss, 20984K reserved, 0K cma-reserved)
[ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000][ T0] trace event string verifier disabled
[ 0.000000][ T0] Running RCU self tests
[ 0.000000][ T0] rcu: Hierarchical RCU implementation.
[ 0.000000][ T0] rcu: RCU lockdep checking is enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000][ T0] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000][ T0] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000][ T0] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000][ T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000][ T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000][ T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000001][ T0] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000013][ T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000091][ T0] Switching to timer-based delay loop, resolution 1ns
[ 0.000336][ T0] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000342][ T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000671][ T0] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000686][ T0] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000691][ T0] ... MAX_LOCK_DEPTH: 48
[ 0.000696][ T0] ... MAX_LOCKDEP_KEYS: 8192
[ 0.000700][ T0] ... CLASSHASH_SIZE: 4096
[ 0.000703][ T0] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000707][ T0] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000711][ T0] ... CHAINHASH_SIZE: 32768
[ 0.000715][ T0] memory used by lock dependency info: 4061 kB
[ 0.000720][ T0] memory used for stack traces: 2112 kB
[ 0.000724][ T0] per task-struct memory footprint: 1536 bytes
[ 0.000773][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000787][ T0] pid_max: default: 32768 minimum: 301
[ 0.000886][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000895][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002105][ T0] CPU: Testing write buffer coherency: ok
[ 0.002168][ T0] Spectre V2: workarounds disabled by configuration
[ 0.003606][ T1] Setting up static identity map for 0x100000 - 0x100060
[ 0.003756][ T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.003891][ T1] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.004190][ T1] rcu: Hierarchical SRCU implementation.
[ 0.004196][ T1] rcu: Max phase no-delay instances is 1000.
[ 0.004870][ T1] dyndbg: unknown flag '\'
[ 0.004877][ T1] dyndbg: flags parse failed
[ 0.005143][ T1] smp: Bringing up secondary CPUs ...
[ 0.006060][ T1] Booting CPU 1
[ 0.006572][ T1] smp: Brought up 1 node, 2 CPUs
[ 0.006581][ T1] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.006589][ T1] CPU: All CPU(s) started in SVC mode.
[ 0.007669][ T1] devtmpfs: initialized
[ 0.016228][ T1] device: 'platform': device_add
[ 0.016350][ T1] bus: 'platform': registered
[ 0.016402][ T1] bus: 'cpu': registered
[ 0.016418][ T1] device: 'cpu': device_add
[ 0.016577][ T1] bus: 'container': registered
[ 0.016586][ T1] device: 'container': device_add
[ 0.017162][ T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.017308][ T1] bus: 'workqueue': registered
[ 0.017318][ T1] device: 'workqueue': device_add
[ 0.017863][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017890][ T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.018045][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.018482][ T1] bus: 'gpio': registered
[ 0.018491][ T1] bus: 'gpio': add driver gpio_stub_drv
[ 0.018582][ T1] device class 'regulator': registering
[ 0.018665][ T1] Registering platform device 'reg-dummy'. Parent at platform
[ 0.018674][ T1] device: 'reg-dummy': device_add
[ 0.018694][ T1] bus: 'platform': add device reg-dummy
[ 0.018798][ T1] bus: 'platform': add driver reg-dummy
[ 0.018817][ T1] bus: 'platform': __driver_probe_device: matched device reg-dummy with driver reg-dummy
[ 0.018875][ T1] bus: 'platform': really_probe: probing driver reg-dummy with device reg-dummy
[ 0.018957][ T1] reg-dummy reg-dummy: no default pinctrl state
[ 0.019076][ T1] regulator-dummy: no parameters, enabled
[ 0.019088][ T1] device: 'regulator.0': device_add
[ 0.019451][ T1] driver: 'reg-dummy': driver_bound: bound to device 'reg-dummy'
[ 0.019504][ T1] bus: 'platform': really_probe: bound device reg-dummy to driver reg-dummy
[ 0.019630][ T1] bus: 'soc': registered
[ 0.020109][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.020145][ T1] device: 'soc0': device_add
[ 0.020215][ T1] bus: 'soc': add device soc0
[ 0.021619][ T1] device class 'bdi': registering
[ 0.021727][ T1] device class 'gpio': registering
[ 0.021779][ T1] device class 'pci_bus': registering
[ 0.021860][ T1] bus: 'pci': registered
[ 0.021909][ T1] bus: 'pci_express': registered
[ 0.021917][ T1] device class 'tty': registering
[ 0.021941][ T1] device class 'devlink': registering
[ 0.022046][ T1] bus: 'platform': add driver sram
[ 0.022135][ T1] bus: 'spi': registered
[ 0.022141][ T1] device class 'spi_master': registering
[ 0.022231][ T1] bus: 'i2c': registered
[ 0.022238][ T1] bus: 'i2c': add driver dummy
[ 0.022359][ T1] thermal_sys: Registered thermal governor 'step_wise'
[ 0.022365][ T1] device class 'thermal': registering
[ 0.022520][ T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.022529][ T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.022652][ T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.022663][ T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.022722][ T1] device class 'dma': registering
[ 0.022894][ T1] bus: 'platform': add driver mvebu-uart-clock
[ 0.022942][ T1] bus: 'platform': add driver mvebu-uart
[ 0.023168][ T1] device: 'pmu': device_add
[ 0.023201][ T1] bus: 'platform': add device pmu
[ 0.023374][ T1] device: 'soc': device_add
[ 0.023405][ T1] bus: 'platform': add device soc
[ 0.023761][ T1] i2c@11000 Linked as a fwnode consumer to pinctrl@18000
[ 0.026641][ T1] device: 'fff00000.bootrom': device_add
[ 0.026675][ T1] bus: 'platform': add device fff00000.bootrom
[ 0.026806][ T1] device: 'soc:internal-regs': device_add
[ 0.026845][ T1] bus: 'platform': add device soc:internal-regs
[ 0.027715][ T1] device: 'f1001400.sdramc': device_add
[ 0.027746][ T1] bus: 'platform': add device f1001400.sdramc
[ 0.027960][ T1] device: 'f1008000.cache-controller': device_add
[ 0.027990][ T1] bus: 'platform': add device f1008000.cache-controller
[ 0.028197][ T1] device: 'f100c000.scu': device_add
[ 0.028226][ T1] bus: 'platform': add device f100c000.scu
[ 0.028427][ T1] device: 'f100c200.timer': device_add
[ 0.028457][ T1] bus: 'platform': add device f100c200.timer
[ 0.028658][ T1] device: 'f100c600.timer': device_add
[ 0.028693][ T1] bus: 'platform': add device f100c600.timer
[ 0.028902][ T1] device: 'f1011000.i2c': device_add
[ 0.028932][ T1] bus: 'platform': add device f1011000.i2c
[ 0.029230][ T1] device: 'f1012000.serial': device_add
[ 0.029260][ T1] bus: 'platform': add device f1012000.serial
[ 0.029472][ T1] device: 'f1018000.pinctrl': device_add
[ 0.029501][ T1] bus: 'platform': add device f1018000.pinctrl
[ 0.029665][ T1] device: 'platform:f1018000.pinctrl--platform:f1011000.i2c': device_add
[ 0.029921][ T1] devices_kset: Moving f1011000.i2c to end of list
[ 0.029933][ T1] platform f1011000.i2c: Linked as a consumer to f1018000.pinctrl
[ 0.029941][ T1] i2c@11000 Dropping the fwnode link to pinctrl@18000
[ 0.030283][ T1] device: 'f1018100.gpio': device_add
[ 0.030315][ T1] bus: 'platform': add device f1018100.gpio
[ 0.030598][ T1] device: 'f1018140.gpio': device_add
[ 0.030628][ T1] bus: 'platform': add device f1018140.gpio
[ 0.030835][ T1] device: 'f1018200.system-controller': device_add
[ 0.030865][ T1] bus: 'platform': add device f1018200.system-controller
[ 0.031148][ T1] device: 'f1018300.phy': device_add
[ 0.031189][ T1] bus: 'platform': add device f1018300.phy
[ 0.031579][ T1] device: 'f1020000.mbus-controller': device_add
[ 0.031615][ T1] bus: 'platform': add device f1020000.mbus-controller
[ 0.031896][ T1] device: 'f1020300.timer': device_add
[ 0.031926][ T1] bus: 'platform': add device f1020300.timer
[ 0.032273][ T1] device: 'f1020300.watchdog': device_add
[ 0.032303][ T1] bus: 'platform': add device f1020300.watchdog
[ 0.032510][ T1] device: 'f1020800.cpurst': device_add
[ 0.032539][ T1] bus: 'platform': add device f1020800.cpurst
[ 0.032752][ T1] device: 'f1020d20.mpcore-soc-ctrl': device_add
[ 0.032783][ T1] bus: 'platform': add device f1020d20.mpcore-soc-ctrl
[ 0.032998][ T1] device: 'f1021010.coherency-fabric': device_add
[ 0.033034][ T1] bus: 'platform': add device f1021010.coherency-fabric
[ 0.033237][ T1] device: 'f1022000.pmsu': device_add
[ 0.033266][ T1] bus: 'platform': add device f1022000.pmsu
[ 0.033470][ T1] device: 'f1070000.ethernet': device_add
[ 0.033500][ T1] bus: 'platform': add device f1070000.ethernet
[ 0.033715][ T1] device: 'f1034000.ethernet': device_add
[ 0.033744][ T1] bus: 'platform': add device f1034000.ethernet
[ 0.033953][ T1] device: 'f1058000.usb': device_add
[ 0.033983][ T1] bus: 'platform': add device f1058000.usb
[ 0.034255][ T1] device: 'f1060800.xor': device_add
[ 0.034291][ T1] bus: 'platform': add device f1060800.xor
[ 0.034580][ T1] device: 'f1060900.xor': device_add
[ 0.034610][ T1] bus: 'platform': add device f1060900.xor
[ 0.034827][ T1] device: 'f1072004.mdio': device_add
[ 0.034856][ T1] bus: 'platform': add device f1072004.mdio
[ 0.035117][ T1] device: 'f1090000.crypto': device_add
[ 0.035146][ T1] bus: 'platform': add device f1090000.crypto
[ 0.035353][ T1] device: 'f10a8000.sata': device_add
[ 0.035382][ T1] bus: 'platform': add device f10a8000.sata
[ 0.035584][ T1] device: 'f10c8000.bm': device_add
[ 0.035620][ T1] bus: 'platform': add device f10c8000.bm
[ 0.035904][ T1] device: 'f10e4078.thermal': device_add
[ 0.035934][ T1] bus: 'platform': add device f10e4078.thermal
[ 0.036136][ T1] device: 'f10d0000.nand-controller': device_add
[ 0.036166][ T1] bus: 'platform': add device f10d0000.nand-controller
[ 0.036534][ T1] device: 'f10f8000.usb3': device_add
[ 0.036564][ T1] bus: 'platform': add device f10f8000.usb3
[ 0.036741][ T1] device: 'f1100000.sa-sram0': device_add
[ 0.036771][ T1] bus: 'platform': add device f1100000.sa-sram0
[ 0.036847][ T1] bus: 'platform': __driver_probe_device: matched device f1100000.sa-sram0 with driver sram
[ 0.036859][ T1] bus: 'platform': really_probe: probing driver sram with device f1100000.sa-sram0
[ 0.036879][ T1] sram f1100000.sa-sram0: no pinctrl handle
[ 0.037062][ T1] driver: 'sram': driver_bound: bound to device 'f1100000.sa-sram0'
[ 0.037141][ T1] bus: 'platform': really_probe: bound device f1100000.sa-sram0 to driver sram
[ 0.037259][ T1] device: 'f1110000.sa-sram1': device_add
[ 0.037292][ T1] bus: 'platform': add device f1110000.sa-sram1
[ 0.037359][ T1] bus: 'platform': __driver_probe_device: matched device f1110000.sa-sram1 with driver sram
[ 0.037369][ T1] bus: 'platform': really_probe: probing driver sram with device f1110000.sa-sram1
[ 0.037387][ T1] sram f1110000.sa-sram1: no pinctrl handle
[ 0.037492][ T1] driver: 'sram': driver_bound: bound to device 'f1110000.sa-sram1'
[ 0.037541][ T1] bus: 'platform': really_probe: bound device f1110000.sa-sram1 to driver sram
[ 0.037662][ T1] device: 'f1200000.bm-bppi': device_add
[ 0.037693][ T1] bus: 'platform': add device f1200000.bm-bppi
[ 0.037759][ T1] bus: 'platform': __driver_probe_device: matched device f1200000.bm-bppi with driver sram
[ 0.037769][ T1] bus: 'platform': really_probe: probing driver sram with device f1200000.bm-bppi
[ 0.037787][ T1] sram f1200000.bm-bppi: no pinctrl handle
[ 0.037897][ T1] driver: 'sram': driver_bound: bound to device 'f1200000.bm-bppi'
[ 0.037946][ T1] bus: 'platform': really_probe: bound device f1200000.bm-bppi to driver sram
[ 0.038019][ T1] device: 'soc:pcie': device_add
[ 0.038051][ T1] bus: 'platform': add device soc:pcie
[ 0.038193][ T1] device: 'usb3_1-phy': device_add
[ 0.038223][ T1] bus: 'platform': add device usb3_1-phy
[ 0.038291][ T1] usb3_1-phy Linked as a fwnode consumer to usb3_1-vbus
[ 0.038356][ T1] device: 'usb3_1-vbus': device_add
[ 0.038396][ T1] bus: 'platform': add device usb3_1-vbus
[ 0.038468][ T1] usb3_1-vbus Linked as a fwnode consumer to pinctrl@18000
[ 0.038499][ T1] usb3_1-vbus Linked as a fwnode consumer to gpio@18140
[ 0.038525][ T1] device: 'platform:usb3_1-vbus--platform:usb3_1-phy': device_add
[ 0.038633][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.038643][ T1] platform usb3_1-phy: Linked as a consumer to usb3_1-vbus
[ 0.038651][ T1] usb3_1-phy Dropping the fwnode link to usb3_1-vbus
[ 0.038669][ T1] device: 'platform:f1018140.gpio--platform:usb3_1-vbus': device_add
[ 0.038771][ T1] devices_kset: Moving usb3_1-vbus to end of list
[ 0.038780][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.038789][ T1] platform usb3_1-vbus: Linked as a consumer to f1018140.gpio
[ 0.038796][ T1] usb3_1-vbus Dropping the fwnode link to gpio@18140
[ 0.038815][ T1] device: 'platform:f1018000.pinctrl--platform:usb3_1-vbus': device_add
[ 0.038924][ T1] devices_kset: Moving usb3_1-vbus to end of list
[ 0.038933][ T1] devices_kset: Moving usb3_1-phy to end of list
[ 0.038942][ T1] platform usb3_1-vbus: Linked as a consumer to f1018000.pinctrl
[ 0.038949][ T1] usb3_1-vbus Dropping the fwnode link to pinctrl@18000
[ 0.039075][ T1] device: 'gpio-keys': device_add
[ 0.039105][ T1] bus: 'platform': add device gpio-keys
[ 0.039175][ T1] gpio-keys Linked as a fwnode consumer to pinctrl@18000
[ 0.039208][ T1] button-wps Linked as a fwnode consumer to gpio@18100
[ 0.039240][ T1] button-reset Linked as a fwnode consumer to gpio@18100
[ 0.039265][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-keys': device_add
[ 0.039392][ T1] devices_kset: Moving gpio-keys to end of list
[ 0.039403][ T1] platform gpio-keys: Linked as a consumer to f1018000.pinctrl
[ 0.039410][ T1] gpio-keys Dropping the fwnode link to pinctrl@18000
[ 0.039504][ T1] device: 'platform:f1018100.gpio--platform:gpio-keys': device_add
[ 0.039608][ T1] platform gpio-keys: Linked as a sync state only consumer to f1018100.gpio
[ 0.039663][ T1] device: 'gpio-leds': device_add
[ 0.039692][ T1] bus: 'platform': add device gpio-leds
[ 0.039769][ T1] gpio-leds Linked as a fwnode consumer to pinctrl@18000
[ 0.039799][ T1] led-power Linked as a fwnode consumer to gpio@18140
[ 0.039831][ T1] led-sata Linked as a fwnode consumer to gpio@18140
[ 0.039859][ T1] device: 'platform:f1018000.pinctrl--platform:gpio-leds': device_add
[ 0.039963][ T1] devices_kset: Moving gpio-leds to end of list
[ 0.039973][ T1] platform gpio-leds: Linked as a consumer to f1018000.pinctrl
[ 0.039981][ T1] gpio-leds Dropping the fwnode link to pinctrl@18000
[ 0.040073][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_add
[ 0.040218][ T1] platform gpio-leds: Linked as a sync state only consumer to f1018140.gpio
[ 0.040293][ T1] device: 'cpu0': device_add
[ 0.040320][ T1] bus: 'cpu': add device cpu0
[ 0.040416][ T1] device: 'cpu1': device_add
[ 0.040443][ T1] bus: 'cpu': add device cpu1
[ 0.041005][ T1] device: 'writeback': device_add
[ 0.041037][ T1] bus: 'workqueue': add device writeback
[ 0.041548][ T1] device class 'block': registering
[ 0.041952][ T1] bus: 'platform': add driver reg-fixed-voltage
[ 0.042094][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
[ 0.042155][ T1] platform usb3_1-vbus: error -EPROBE_DEFER: supplier f1018140.gpio not ready
[ 0.042169][ T1] platform usb3_1-vbus: Added to deferred list
[ 0.042234][ T1] device class 'misc': registering
[ 0.042472][ T1] device class 'scsi_host': registering
[ 0.042554][ T1] bus: 'scsi': registered
[ 0.042560][ T1] device class 'scsi_device': registering
[ 0.042583][ T1] SCSI subsystem initialized
[ 0.042591][ T1] device class 'ata_link': registering
[ 0.042614][ T1] device class 'ata_port': registering
[ 0.042635][ T1] device class 'ata_device': registering
[ 0.042694][ T1] libata version 3.00 loaded.
[ 0.042839][ T1] bus: 'usb': registered
[ 0.042855][ T1] bus: 'usb': add driver usbfs
[ 0.042912][ T1] usbcore: registered new interface driver usbfs
[ 0.042949][ T1] bus: 'usb': add driver hub
[ 0.043000][ T1] usbcore: registered new interface driver hub
[ 0.043029][ T1] bus: 'usb': add driver usb
[ 0.043068][ T1] usbcore: registered new device driver usb
[ 0.043078][ T1] bus: 'platform': add driver usb_phy_generic
[ 0.043192][ T1] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
[ 0.043208][ T1] platform usb3_1-phy: error -EPROBE_DEFER: supplier usb3_1-vbus not ready
[ 0.043218][ T1] platform usb3_1-phy: Added to deferred list
[ 0.043262][ T1] device class 'input': registering
[ 0.043304][ T1] device class 'hwmon': registering
[ 0.043330][ T1] device class 'leds': registering
[ 0.043586][ T1] device class 'watchdog': registering
[ 0.053511][ T1] clocksource: Switched to clocksource arm_global_timer
[ 0.054823][ T1] device class 'mem': registering
[ 0.054860][ T1] device: 'null': device_add
[ 0.055308][ T1] device: 'zero': device_add
[ 0.055451][ T1] device: 'full': device_add
[ 0.055585][ T1] device: 'random': device_add
[ 0.055726][ T1] device: 'urandom': device_add
[ 0.055857][ T1] device: 'kmsg': device_add
[ 0.056022][ T1] device: 'tty': device_add
[ 0.056208][ T1] device: 'console': device_add
[ 0.056385][ T1] PCI: CLS 0 bytes, default 64
[ 0.056659][ T1] bus: 'platform': add driver armv7-pmu
[ 0.056689][ T1] bus: 'platform': __driver_probe_device: matched device pmu with driver armv7-pmu
[ 0.056701][ T1] bus: 'platform': really_probe: probing driver armv7-pmu with device pmu
[ 0.056723][ T1] armv7-pmu pmu: no pinctrl handle
[ 0.128996][ T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.129014][ T1] driver: 'armv7-pmu': driver_bound: bound to device 'pmu'
[ 0.129105][ T1] bus: 'platform': really_probe: bound device pmu to driver armv7-pmu
[ 0.129535][ T1] bus: 'clocksource': registered
[ 0.129551][ T1] device: 'clocksource': device_add
[ 0.129576][ T1] device: 'clocksource0': device_add
[ 0.129610][ T1] bus: 'clocksource': add device clocksource0
[ 0.129710][ T1] bus: 'platform': add driver alarmtimer
[ 0.129908][ T1] bus: 'clockevents': registered
[ 0.129926][ T1] device: 'clockevents': device_add
[ 0.129949][ T1] device: 'clockevent0': device_add
[ 0.129968][ T1] bus: 'clockevents': add device clockevent0
[ 0.130054][ T1] device: 'clockevent1': device_add
[ 0.130078][ T1] bus: 'clockevents': add device clockevent1
[ 0.130136][ T1] device: 'broadcast': device_add
[ 0.130153][ T1] bus: 'clockevents': add device broadcast
[ 0.130374][ T1] bus: 'event_source': registered
[ 0.130397][ T1] device: 'software': device_add
[ 0.130417][ T1] bus: 'event_source': add device software
[ 0.130528][ T1] device: 'tracepoint': device_add
[ 0.130550][ T1] bus: 'event_source': add device tracepoint
[ 0.130604][ T1] device: 'breakpoint': device_add
[ 0.130623][ T1] bus: 'event_source': add device breakpoint
[ 0.130675][ T1] device: 'armv7_cortex_a9': device_add
[ 0.130833][ T1] bus: 'event_source': add device armv7_cortex_a9
[ 0.131094][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.131792][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.178248][ T1] device class 'bsg': registering
[ 0.178294][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.178445][ T1] bus: 'platform': add driver simple-pm-bus
[ 0.178478][ T1] bus: 'platform': __driver_probe_device: matched device soc with driver simple-pm-bus
[ 0.178491][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc
[ 0.178514][ T1] simple-pm-bus soc: no pinctrl handle
[ 0.178567][ T1] simple-pm-bus: probe of soc rejects match -19
[ 0.178598][ T1] bus: 'platform': __driver_probe_device: matched device soc:internal-regs with driver simple-pm-bus
[ 0.178609][ T1] bus: 'platform': really_probe: probing driver simple-pm-bus with device soc:internal-regs
[ 0.178627][ T1] simple-pm-bus soc:internal-regs: no pinctrl handle
[ 0.178677][ T1] driver: 'simple-pm-bus': driver_bound: bound to device 'soc:internal-regs'
[ 0.178857][ T1] bus: 'platform': really_probe: bound device soc:internal-regs to driver simple-pm-bus
[ 0.179037][ T1] device class 'phy': registering
[ 0.179073][ T1] bus: 'platform': add driver armada-38x-comphy
[ 0.179137][ T1] bus: 'platform': __driver_probe_device: matched device f1018300.phy with driver armada-38x-comphy
[ 0.179149][ T1] bus: 'platform': really_probe: probing driver armada-38x-comphy with device f1018300.phy
[ 0.179169][ T1] armada-38x-comphy f1018300.phy: no pinctrl handle
[ 0.179321][ T1] phy phy-f1018300.phy.0: Looking up phy-supply from device tree
[ 0.179334][ T1] phy phy-f1018300.phy.0: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@0 failed
[ 0.179376][ T1] device: 'phy-f1018300.phy.0': device_add
[ 0.179545][ T1] phy phy-f1018300.phy.1: Looking up phy-supply from device tree
[ 0.179556][ T1] phy phy-f1018300.phy.1: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@1 failed
[ 0.179595][ T1] device: 'phy-f1018300.phy.1': device_add
[ 0.179700][ T1] phy phy-f1018300.phy.2: Looking up phy-supply from device tree
[ 0.179710][ T1] phy phy-f1018300.phy.2: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@2 failed
[ 0.179748][ T1] device: 'phy-f1018300.phy.2': device_add
[ 0.179847][ T1] phy phy-f1018300.phy.3: Looking up phy-supply from device tree
[ 0.179857][ T1] phy phy-f1018300.phy.3: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@3 failed
[ 0.179895][ T1] device: 'phy-f1018300.phy.3': device_add
[ 0.179995][ T1] phy phy-f1018300.phy.4: Looking up phy-supply from device tree
[ 0.180005][ T1] phy phy-f1018300.phy.4: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@4 failed
[ 0.180043][ T1] device: 'phy-f1018300.phy.4': device_add
[ 0.180140][ T1] phy phy-f1018300.phy.5: Looking up phy-supply from device tree
[ 0.180150][ T1] phy phy-f1018300.phy.5: Looking up phy-supply property in node /soc/internal-regs/phy@18300/phy@5 failed
[ 0.180188][ T1] device: 'phy-f1018300.phy.5': device_add
[ 0.180324][ T1] driver: 'armada-38x-comphy': driver_bound: bound to device 'f1018300.phy'
[ 0.180421][ T1] bus: 'platform': really_probe: bound device f1018300.phy to driver armada-38x-comphy
[ 0.180560][ T1] bus: 'platform': add driver armada-38x-pinctrl
[ 0.180622][ T1] bus: 'platform': __driver_probe_device: matched device f1018000.pinctrl with driver armada-38x-pinctrl
[ 0.180633][ T1] bus: 'platform': really_probe: probing driver armada-38x-pinctrl with device f1018000.pinctrl
[ 0.180659][ T1] armada-38x-pinctrl f1018000.pinctrl: no pinctrl handle
[ 0.181367][ T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.181413][ T1] driver: 'armada-38x-pinctrl': driver_bound: bound to device 'f1018000.pinctrl'
[ 0.181585][ T1] bus: 'platform': really_probe: bound device f1018000.pinctrl to driver armada-38x-pinctrl
[ 0.181731][ T1] bus: 'platform': add driver mvebu-gpio
[ 0.181797][ T1] bus: 'platform': __driver_probe_device: matched device f1018100.gpio with driver mvebu-gpio
[ 0.181807][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018100.gpio
[ 0.181827][ T1] mvebu-gpio f1018100.gpio: no pinctrl handle
[ 0.182549][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.182677][ T1] device: 'gpiochip0': device_add
[ 0.182714][ T1] bus: 'gpio': add device gpiochip0
[ 0.182971][ T1] device: 'gpiochip0': device_add
[ 0.183402][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018100.gpio'
[ 0.183527][ T1] bus: 'platform': really_probe: bound device f1018100.gpio to driver mvebu-gpio
[ 0.183547][ T1] bus: 'platform': __driver_probe_device: matched device f1018140.gpio with driver mvebu-gpio
[ 0.183557][ T1] bus: 'platform': really_probe: probing driver mvebu-gpio with device f1018140.gpio
[ 0.183587][ T1] mvebu-gpio f1018140.gpio: no pinctrl handle
[ 0.184246][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.184318][ T1] device: 'gpiochip1': device_add
[ 0.184353][ T1] bus: 'gpio': add device gpiochip1
[ 0.184533][ T1] device: 'gpiochip32': device_add
[ 0.184805][ T1] driver: 'mvebu-gpio': driver_bound: bound to device 'f1018140.gpio'
[ 0.184873][ T1] bus: 'platform': really_probe: bound device f1018140.gpio to driver mvebu-gpio
[ 0.185035][ T1] bus: 'pci': add driver pcieport
[ 0.185124][ T1] bus: 'platform': add driver mvebu-pcie
[ 0.185282][ T1] bus: 'platform': __driver_probe_device: matched device soc:pcie with driver mvebu-pcie
[ 0.185294][ T1] bus: 'platform': really_probe: probing driver mvebu-pcie with device soc:pcie
[ 0.185314][ T1] mvebu-pcie soc:pcie: no pinctrl handle
[ 0.185371][ T1] mvebu-pcie soc:pcie: host bridge /soc/pcie ranges:
[ 0.185443][ T1] mvebu-pcie soc:pcie: MEM 0x00f1080000..0x00f1081fff -> 0x0000080000
[ 0.185495][ T1] mvebu-pcie soc:pcie: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000
[ 0.185545][ T1] mvebu-pcie soc:pcie: MEM 0x00f1044000..0x00f1045fff -> 0x0000044000
[ 0.185594][ T1] mvebu-pcie soc:pcie: MEM 0x00f1048000..0x00f1049fff -> 0x0000048000
[ 0.185641][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.185686][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000
[ 0.185730][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.185774][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0200000000
[ 0.185818][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.185861][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0300000000
[ 0.185905][ T1] mvebu-pcie soc:pcie: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.185931][ T1] mvebu-pcie soc:pcie: IO 0xffffffffffffffff..0x00fffffffe -> 0x0400000000
[ 0.186664][ T1] device: 'pci0000:00': device_add
[ 0.186705][ T1] device: '0000:00': device_add
[ 0.186874][ T1] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.186886][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.186897][ T1] pci_bus 0000:00: root bus resource [mem 0xf1080000-0xf1081fff] (bus address [0x00080000-0x00081fff])
[ 0.186907][ T1] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff])
[ 0.186917][ T1] pci_bus 0000:00: root bus resource [mem 0xf1044000-0xf1045fff] (bus address [0x00044000-0x00045fff])
[ 0.186926][ T1] pci_bus 0000:00: root bus resource [mem 0xf1048000-0xf1049fff] (bus address [0x00048000-0x00049fff])
[ 0.186935][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.186943][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 0.187114][ T1] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.187276][ T1] device: '0000:00:01.0': device_add
[ 0.187361][ T1] bus: 'pci': add device 0000:00:01.0
[ 0.187656][ T1] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.187773][ T1] device: '0000:00:02.0': device_add
[ 0.187855][ T1] bus: 'pci': add device 0000:00:02.0
[ 0.188869][ T1] PCI: bus0: Fast back to back transfers disabled
[ 0.188880][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.188898][ T1] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.188951][ T1] device: '0000:01': device_add
[ 0.189126][ T1] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.189164][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
[ 0.189191][ T1] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
[ 0.189338][ T1] pci 0000:01:00.0: supports D1 D2
[ 0.189346][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.189456][ T1] device: '0000:01:00.0': device_add
[ 0.189517][ T1] bus: 'pci': add device 0000:01:00.0
[ 0.189743][ T1] PCI: bus1: Fast back to back transfers disabled
[ 0.189753][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.189806][ T1] device: '0000:02': device_add
[ 0.189987][ T1] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.190028][ T1] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
[ 0.190056][ T1] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
[ 0.190228][ T1] pci 0000:02:00.0: supports D1 D2
[ 0.190236][ T1] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.190281][ T1] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.190315][ T1] device: '0000:02:00.0': device_add
[ 0.190368][ T1] bus: 'pci': add device 0000:02:00.0
[ 0.190597][ T1] PCI: bus2: Fast back to back transfers disabled
[ 0.190606][ T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.190631][ T1] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
[ 0.190643][ T1] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
[ 0.190656][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.190678][ T1] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
[ 0.190698][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.190710][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.190733][ T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.190755][ T1] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
[ 0.190775][ T1] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.190786][ T1] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff]
[ 0.190818][ T1] pci 0000:00:01.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 0.190861][ T1] pci 0000:01:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.190897][ T1] pci 0000:00:02.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 0.190929][ T1] pci 0000:02:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 0.191002][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:01.0 with driver pcieport
[ 0.191017][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:01.0
[ 0.191040][ T1] pcieport 0000:00:01.0: no pinctrl handle
[ 0.191101][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.191125][ T1] pcieport: probe of 0000:00:01.0 rejects match -19
[ 0.191169][ T1] bus: 'pci': __driver_probe_device: matched device 0000:00:02.0 with driver pcieport
[ 0.191179][ T1] bus: 'pci': really_probe: probing driver pcieport with device 0000:00:02.0
[ 0.191198][ T1] pcieport 0000:00:02.0: no pinctrl handle
[ 0.191249][ T1] pcieport 0000:00:02.0: enabling device (0140 -> 0142)
[ 0.191270][ T1] pcieport: probe of 0000:00:02.0 rejects match -19
[ 0.191328][ T1] driver: 'mvebu-pcie': driver_bound: bound to device 'soc:pcie'
[ 0.191397][ T1] bus: 'platform': really_probe: bound device soc:pcie to driver mvebu-pcie
[ 0.191463][ T1] bus: 'platform': add driver of_fixed_factor_clk
[ 0.191639][ T1] bus: 'platform': add driver of_fixed_clk
[ 0.191790][ T1] bus: 'platform': add driver gpio-clk
[ 0.191946][ T1] bus: 'platform': add driver mv_xor
[ 0.192046][ T1] bus: 'platform': __driver_probe_device: matched device f1060800.xor with driver mv_xor
[ 0.192057][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060800.xor
[ 0.192076][ T1] mv_xor f1060800.xor: no pinctrl handle
[ 0.192130][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.255391][ T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.255500][ T1] device: 'dma0chan0': device_add
[ 0.255731][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060800.xor'
[ 0.255823][ T1] bus: 'platform': really_probe: bound device f1060800.xor to driver mv_xor
[ 0.255842][ T1] bus: 'platform': __driver_probe_device: matched device f1060900.xor with driver mv_xor
[ 0.255852][ T1] bus: 'platform': really_probe: probing driver mv_xor with device f1060900.xor
[ 0.255873][ T1] mv_xor f1060900.xor: no pinctrl handle
[ 0.255930][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.315392][ T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.315435][ T1] device: 'dma1chan0': device_add
[ 0.315623][ T1] driver: 'mv_xor': driver_bound: bound to device 'f1060900.xor'
[ 0.315711][ T1] bus: 'platform': really_probe: bound device f1060900.xor to driver mv_xor
[ 0.315850][ T1] device: 'ptmx': device_add
[ 0.316039][ T1] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.316073][ T1] Registering platform device 'serial8250'. Parent at platform
[ 0.316082][ T1] device: 'serial8250': device_add
[ 0.316104][ T1] bus: 'platform': add device serial8250
[ 0.316309][ T1] device: 'ttyS0': device_add
[ 0.316764][ T1] bus: 'platform': add driver serial8250
[ 0.316845][ T1] bus: 'platform': __driver_probe_device: matched device serial8250 with driver serial8250
[ 0.316857][ T1] bus: 'platform': really_probe: probing driver serial8250 with device serial8250
[ 0.316877][ T1] serial8250 serial8250: no default pinctrl state
[ 0.316907][ T1] driver: 'serial8250': driver_bound: bound to device 'serial8250'
[ 0.316942][ T1] bus: 'platform': really_probe: bound device serial8250 to driver serial8250
[ 0.316990][ T1] bus: 'platform': add driver dw-apb-uart
[ 0.317047][ T1] bus: 'platform': __driver_probe_device: matched device f1012000.serial with driver dw-apb-uart
[ 0.317057][ T1] bus: 'platform': really_probe: probing driver dw-apb-uart with device f1012000.serial
[ 0.317083][ T1] dw-apb-uart f1012000.serial: no pinctrl handle
[ 0.317441][ T1] device: 'ttyS0': device_unregister
[ 0.318131][ T1] printk: console [ttyS0] disabled
[ 0.338420][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 41, base_baud = 12500000) is a 16550A
[ 0.338599][ T1] printk: console [ttyS0] enabled
[ 3.904166][ T1] device: 'ttyS0': device_add
[ 3.909336][ T1] driver: 'dw-apb-uart': driver_bound: bound to device 'f1012000.serial'
[ 3.917762][ T1] bus: 'platform': really_probe: bound device f1012000.serial to driver dw-apb-uart
[ 3.927253][ T1] device: 'ttyprintk': device_add
[ 3.932607][ T1] device: 'loop-control': device_add
[ 3.938677][ T1] device: 'loop0': device_add
[ 3.944055][ T1] device: '7:0': device_add
[ 3.948749][ T1] loop: module loaded
[ 3.952615][ T1] device class 'zram-control': registering
[ 3.958591][ T1] device: 'zram0': device_add
[ 3.963951][ T1] device: '254:0': device_add
[ 3.968808][ T1] zram: Added device: zram0
[ 3.973241][ T1] device class 'scsi_disk': registering
[ 3.978745][ T1] bus: 'scsi': add driver sd
[ 3.983265][ T1] bus: 'pci': add driver ahci
[ 3.987932][ T1] bus: 'platform': add driver ahci-mvebu
[ 3.993594][ T1] bus: 'platform': __driver_probe_device: matched device f10a8000.sata with driver ahci-mvebu
[ 4.003762][ T1] bus: 'platform': really_probe: probing driver ahci-mvebu with device f10a8000.sata
[ 4.013131][ T1] ahci-mvebu f10a8000.sata: no pinctrl handle
[ 4.019244][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply from device tree
[ 4.027143][ T1] ahci-mvebu f10a8000.sata: Looking up ahci-supply property in node /soc/internal-regs/sata@a8000 failed
[ 4.038288][ T1] ahci-mvebu f10a8000.sata: supply ahci not found, using dummy regulator
[ 4.046754][ T1] device: 'regulator:regulator.0--platform:f10a8000.sata': device_add
[ 4.055063][ T1] devices_kset: Moving f10a8000.sata to end of list
[ 4.061545][ T1] ahci-mvebu f10a8000.sata: Linked as a consumer to regulator.0
[ 4.069095][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply from device tree
[ 4.076903][ T1] ahci-mvebu f10a8000.sata: Looking up phy-supply property in node /soc/internal-regs/sata@a8000 failed
[ 4.087957][ T1] ahci-mvebu f10a8000.sata: supply phy not found, using dummy regulator
[ 4.096317][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply from device tree
[ 4.104389][ T1] ahci-mvebu f10a8000.sata: Looking up target-supply property in node /soc/internal-regs/sata@a8000 failed
[ 4.115712][ T1] ahci-mvebu f10a8000.sata: supply target not found, using dummy regulator
[ 4.124640][ T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 4.134463][ T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 4.144166][ T1] device: 'ata1': device_add
[ 4.148665][ T1] device: 'ata1': device_add
[ 4.153494][ T1] device: 'link1': device_add
[ 4.158076][ T1] device: 'link1': device_add
[ 4.162753][ T1] device: 'dev1.0': device_add
[ 4.167441][ T1] device: 'dev1.0': device_add
[ 4.172225][ T1] device: 'ata2': device_add
[ 4.176746][ T1] device: 'ata2': device_add
[ 4.181318][ T1] device: 'link2': device_add
[ 4.185916][ T1] device: 'link2': device_add
[ 4.190572][ T1] device: 'dev2.0': device_add
[ 4.195257][ T1] device: 'dev2.0': device_add
[ 4.200422][ T1] device: 'scsi_tmf_0': device_add
[ 4.205482][ T1] bus: 'workqueue': add device scsi_tmf_0
[ 4.211166][ T1] scsi host0: ahci-mvebu
[ 4.215457][ T1] device: 'host0': device_add
[ 4.220034][ T1] bus: 'scsi': add device host0
[ 4.224894][ T1] device: 'host0': device_add
[ 4.230035][ T1] device: 'scsi_tmf_1': device_add
[ 4.235086][ T1] bus: 'workqueue': add device scsi_tmf_1
[ 4.240764][ T1] scsi host1: ahci-mvebu
[ 4.244976][ T1] device: 'host1': device_add
[ 4.249551][ T1] bus: 'scsi': add device host1
[ 4.254347][ T1] device: 'host1': device_add
[ 4.259117][ T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 42
[ 4.267796][ T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 42
[ 4.276522][ T1] driver: 'ahci-mvebu': driver_bound: bound to device 'f10a8000.sata'
[ 4.284664][ T1] bus: 'platform': really_probe: bound device f10a8000.sata to driver ahci-mvebu
[ 4.293790][ T1] device class 'mtd': registering
[ 4.298760][ T1] device: 'mtd-0': device_add
[ 4.303656][ T1] bus: 'platform': add driver marvell-nfc
[ 4.309428][ T1] bus: 'platform': __driver_probe_device: matched device f10d0000.nand-controller with driver marvell-nfc
[ 4.320642][ T1] bus: 'platform': really_probe: probing driver marvell-nfc with device f10d0000.nand-controller
[ 4.331079][ T1] marvell-nfc f10d0000.nand-controller: no pinctrl handle
[ 4.338645][ T1] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 4.345773][ T1] nand: AMD/Spansion S34ML01G2
[ 4.350417][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.359130][ T1] Bad block table found at page 65472, version 0x01
[ 4.366098][ T1] Bad block table found at page 65408, version 0x01
[ 4.372977][ T1] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 4.380809][ T1] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 4.387045][ T1] 0x000000000000-0x000000200000 : "u-boot"
[ 4.392853][ T1] device: 'mtd0': device_add
[ 4.398063][ T1] device: 'mtd0ro': device_add
[ 4.403286][ T1] device: 'mtdblock0': device_add
[ 4.408943][ T1] device: '31:0': device_add
[ 4.413714][ T1] 0x000000200000-0x000000240000 : "u_env"
[ 4.419348][ T1] device: 'mtd1': device_add
[ 4.424196][ T1] device: 'mtd1ro': device_add
[ 4.429161][ T1] device: 'mtdblock1': device_add
[ 4.434666][ T1] device: '31:1': device_add
[ 4.439375][ T1] 0x000000240000-0x000000280000 : "s_env"
[ 4.445026][ T1] device: 'mtd2': device_add
[ 4.449822][ T1] device: 'mtd2ro': device_add
[ 4.454814][ T1] device: 'mtdblock2': device_add
[ 4.460283][ T1] device: '31:2': device_add
[ 4.464991][ T1] 0x000000900000-0x000000a00000 : "devinfo"
[ 4.470802][ T1] device: 'mtd3': device_add
[ 4.475627][ T1] device: 'mtd3ro': device_add
[ 4.480671][ T1] device: 'mtdblock3': device_add
[ 4.486343][ T1] device: '31:3': device_add
[ 4.491026][ T1] 0x000000a00000-0x000003200000 : "kernel1"
[ 4.497574][ T1] device: 'mtd4': device_add
[ 4.502393][ T1] device: 'mtd4ro': device_add
[ 4.507422][ T1] device: 'mtdblock4': device_add
[ 4.512897][ T1] device: '31:4': device_add
[ 4.517595][ T1] 0x000001000000-0x000003200000 : "rootfs1"
[ 4.524022][ T1] device: 'mtd5': device_add
[ 4.528846][ T1] device: 'mtd5ro': device_add
[ 4.533837][ T1] device: 'mtdblock5': device_add
[ 4.539310][ T1] device: '31:5': device_add
[ 4.544010][ T1] 0x000003200000-0x000005a00000 : "kernel2"
[ 4.550523][ T1] device: 'mtd6': device_add
[ 4.555347][ T1] device: 'mtd6ro': device_add
[ 4.560333][ T1] device: 'mtdblock6': device_add
[ 4.565869][ T1] device: '31:6': device_add
[ 4.570544][ T1] 0x000003800000-0x000005a00000 : "rootfs2"
[ 4.576983][ T1] device: 'mtd7': device_add
[ 4.581798][ T1] device: 'mtd7ro': device_add
[ 4.586787][ T1] device: 'mtdblock7': device_add
[ 4.592257][ T1] device: '31:7': device_add
[ 4.596967][ T1] 0x000005a00000-0x000008000000 : "syscfg"
[ 4.603339][ T1] device: 'mtd8': device_add
[ 4.608168][ T1] device: 'mtd8ro': device_add
[ 4.613112][ T1] device: 'mtdblock8': device_add
[ 4.618616][ T1] device: '31:8': device_add
[ 4.623284][ T1] 0x000000280000-0x000000900000 : "unused_area"
[ 4.629570][ T1] device: 'mtd9': device_add
[ 4.634392][ T1] device: 'mtd9ro': device_add
[ 4.635223][ T108] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.639358][ T1] device: 'mtdblock9': device_add
[ 4.650694][ T1] device: '31:9': device_add
[ 4.655423][ T1] driver: 'marvell-nfc': driver_bound: bound to device 'f10d0000.nand-controller'
[ 4.664665][ T1] bus: 'platform': really_probe: bound device f10d0000.nand-controller to driver marvell-nfc
[ 4.674824][ T1] bus: 'spi': add driver spi-nor
[ 4.679694][ T1] bus: 'platform': add driver orion_spi
[ 4.685420][ T1] bus: 'pci': add driver ehci-pci
[ 4.690406][ T1] bus: 'platform': add driver orion-ehci
[ 4.696033][ T1] bus: 'platform': __driver_probe_device: matched device f1058000.usb with driver orion-ehci
[ 4.706111][ T1] bus: 'platform': really_probe: probing driver orion-ehci with device f1058000.usb
[ 4.715420][ T1] orion-ehci f1058000.usb: no pinctrl handle
[ 4.721508][ T1] orion-ehci f1058000.usb: EHCI Host Controller
[ 4.727893][ T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 4.736445][ T1] orion-ehci f1058000.usb: irq 44, io mem 0xf1058000
[ 4.763497][ T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 4.770833][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 4.779918][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.787901][ T1] usb usb1: Product: EHCI Host Controller
[ 4.793525][ T1] usb usb1: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 ehci_hcd
[ 4.802095][ T1] usb usb1: SerialNumber: f1058000.usb
[ 4.807476][ T1] device: 'usb1': device_add
[ 4.812226][ T1] bus: 'usb': add device usb1
[ 4.817405][ T1] bus: 'usb': __driver_probe_device: matched device usb1 with driver usb
[ 4.825814][ T1] bus: 'usb': really_probe: probing driver usb with device usb1
[ 4.833724][ T1] device: '1-0:1.0': device_add
[ 4.838539][ T1] bus: 'usb': add device 1-0:1.0
[ 4.843577][ T1] bus: 'usb': __driver_probe_device: matched device 1-0:1.0 with driver hub
[ 4.852178][ T1] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[ 4.860032][ T1] hub 1-0:1.0: USB hub found
[ 4.864637][ T1] hub 1-0:1.0: 1 port detected
[ 4.869619][ T1] device: 'usb1-port1': device_add
[ 4.874854][ T1] usb usb1-port1: adding component (ops connector_ops)
[ 4.881747][ T1] driver: 'hub': driver_bound: bound to device '1-0:1.0'
[ 4.888795][ T1] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[ 4.896355][ T1] device: 'ep_81': device_add
[ 4.900994][ T1] driver: 'usb': driver_bound: bound to device 'usb1'
[ 4.907829][ T1] bus: 'usb': really_probe: bound device usb1 to driver usb
[ 4.915047][ T1] device: 'ep_00': device_add
[ 4.919669][ T1] driver: 'orion-ehci': driver_bound: bound to device 'f1058000.usb'
[ 4.927708][ T1] bus: 'platform': really_probe: bound device f1058000.usb to driver orion-ehci
[ 4.936772][ T1] bus: 'pci': add driver xhci_hcd
[ 4.941750][ T1] bus: 'platform': add driver xhci-hcd
[ 4.947322][ T1] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 4.957313][ T1] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 4.966525][ T1] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 4.972620][ T1] xhci-hcd f10f8000.usb3: Driver xhci-hcd requests probe deferral
[ 4.980772][ T1] platform f10f8000.usb3: Added to deferred list
[ 4.987137][ T1] bus: 'usb': add driver usb-storage
[ 4.992376][ T1] usbcore: registered new interface driver usb-storage
[ 4.999142][ T1] i2c_dev: i2c /dev entries driver
[ 5.004167][ T1] device class 'i2c-dev': registering
[ 5.009459][ T1] bus: 'platform': add driver mv64xxx_i2c
[ 5.015128][ T1] bus: 'platform': __driver_probe_device: matched device f1011000.i2c with driver mv64xxx_i2c
[ 5.025293][ T1] bus: 'platform': really_probe: probing driver mv64xxx_i2c with device f1011000.i2c
[ 5.034738][ T1] mv64xxx_i2c f1011000.i2c: no init pinctrl state
[ 5.041364][ T1] device: 'i2c-0': device_add
[ 5.045987][ T1] bus: 'i2c': add device i2c-0
[ 5.050727][ T1] device: 'i2c-0': device_add
[ 5.055975][ T1] device: '0-004c': device_add
[ 5.060664][ T1] bus: 'i2c': add device 0-004c
[ 5.065538][ T1] device: '0-0068': device_add
[ 5.070221][ T1] bus: 'i2c': add device 0-0068
[ 5.075126][ T1] driver: 'mv64xxx_i2c': driver_bound: bound to device 'f1011000.i2c'
[ 5.083238][ T1] bus: 'platform': really_probe: bound device f1011000.i2c to driver mv64xxx_i2c
[ 5.092429][ T1] bus: 'i2c': add driver tmp421
[ 5.097200][ T1] bus: 'i2c': __driver_probe_device: matched device 0-004c with driver tmp421
[ 5.105967][ T1] bus: 'i2c': really_probe: probing driver tmp421 with device 0-004c
[ 5.113983][ T1] tmp421 0-004c: no pinctrl handle
[ 5.120566][ T1] device: 'hwmon0': device_add
[ 5.125468][ T1] driver: 'tmp421': driver_bound: bound to device '0-004c'
[ 5.127046][ T113] ata2: SATA link down (SStatus 100 SControl 300)
[ 5.132677][ T1] bus: 'i2c': really_probe: bound device 0-004c to driver tmp421
[ 5.146582][ T1] bus: 'platform': add driver armada_thermal
[ 5.152605][ T1] bus: 'platform': __driver_probe_device: matched device f10e4078.thermal with driver armada_thermal
[ 5.163382][ T1] bus: 'platform': really_probe: probing driver armada_thermal with device f10e4078.thermal
[ 5.173380][ T1] armada_thermal f10e4078.thermal: no pinctrl handle
[ 5.181271][ T1] device: 'thermal_zone0': device_add
[ 5.186817][ T1] device: 'hwmon1': device_add
[ 5.191601][ T1] driver: 'armada_thermal': driver_bound: bound to device 'f10e4078.thermal'
[ 5.200350][ T1] bus: 'platform': really_probe: bound device f10e4078.thermal to driver armada_thermal
[ 5.210069][ T1] bus: 'platform': add driver orion_wdt
[ 5.215608][ T1] bus: 'platform': __driver_probe_device: matched device f1020300.watchdog with driver orion_wdt
[ 5.226033][ T1] bus: 'platform': really_probe: probing driver orion_wdt with device f1020300.watchdog
[ 5.235681][ T1] orion_wdt f1020300.watchdog: no pinctrl handle
[ 5.242461][ T1] device: 'watchdog': device_add
[ 5.247620][ T1] device: 'watchdog0': device_add
[ 5.252983][ T1] orion_wdt: Initial timeout 171 sec
[ 5.258190][ T1] driver: 'orion_wdt': driver_bound: bound to device 'f1020300.watchdog'
[ 5.266588][ T1] bus: 'platform': really_probe: bound device f1020300.watchdog to driver orion_wdt
[ 5.276013][ T1] bus: 'platform': add driver leds-gpio
[ 5.281559][ T1] bus: 'platform': __driver_probe_device: matched device gpio-leds with driver leds-gpio
[ 5.291288][ T1] bus: 'platform': really_probe: probing driver leds-gpio with device gpio-leds
[ 5.300303][ T1] leds-gpio gpio-leds: no init pinctrl state
[ 5.306412][ T1] device: 'shelby:white:power': device_add
[ 5.312553][ T1] device: 'shelby:white:sata': device_add
[ 5.318358][ T1] driver: 'leds-gpio': driver_bound: bound to device 'gpio-leds'
[ 5.326017][ T1] leds-gpio gpio-leds: Dropping the link to f1018140.gpio
[ 5.333021][ T1] device: 'platform:f1018140.gpio--platform:gpio-leds': device_unregister
[ 5.341661][ T1] bus: 'platform': really_probe: bound device gpio-leds to driver leds-gpio
[ 5.350303][ T1] bus: 'i2c': add driver leds-pca963x
[ 5.355603][ T1] bus: 'i2c': __driver_probe_device: matched device 0-0068 with driver leds-pca963x
[ 5.364902][ T1] bus: 'i2c': really_probe: probing driver leds-pca963x with device 0-0068
[ 5.373398][ T1] leds-pca963x 0-0068: no pinctrl handle
[ 5.381600][ T1] device: 'pca963x:shelby:amber:wan': device_add
[ 5.387975][ T1] device: 'pca963x:shelby:white:wan': device_add
[ 5.394320][ T1] device: 'pca963x:shelby:white:wlan_2g': device_add
[ 5.400996][ T1] device: 'pca963x:shelby:white:wlan_5g': device_add
[ 5.407689][ T1] device: 'pca963x:shelby:white:usb2': device_add
[ 5.414128][ T1] device: 'pca963x:shelby:white:usb3_1': device_add
[ 5.420709][ T1] device: 'pca963x:shelby:white:usb3_2': device_add
[ 5.427321][ T1] device: 'pca963x:shelby:white:wps': device_add
[ 5.433666][ T1] device: 'pca963x:shelby:amber:wps': device_add
[ 5.439962][ T1] driver: 'leds-pca963x': driver_bound: bound to device '0-0068'
[ 5.447702][ T1] bus: 'i2c': really_probe: bound device 0-0068 to driver leds-pca963x
[ 5.456218][ T1] bus: 'platform': add driver marvell-cesa
[ 5.462067][ T1] bus: 'platform': __driver_probe_device: matched device f1090000.crypto with driver marvell-cesa
[ 5.472583][ T1] bus: 'platform': really_probe: probing driver marvell-cesa with device f1090000.crypto
[ 5.482321][ T1] marvell-cesa f1090000.crypto: no pinctrl handle
[ 5.489799][ T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 5.497708][ T1] driver: 'marvell-cesa': driver_bound: bound to device 'f1090000.crypto'
[ 5.506194][ T1] bus: 'platform': really_probe: bound device f1090000.crypto to driver marvell-cesa
[ 5.515672][ T1] device class 'extcon': registering
[ 5.520876][ T1] bus: 'platform': add driver mvebu-devbus
[ 5.526788][ T1] Registering SWP/SWPB emulation handler
[ 5.562880][ T22] devices_kset: Moving usb3_1-vbus to end of list
[ 5.569355][ T22] devices_kset: Moving usb3_1-phy to end of list
[ 5.575603][ T22] platform usb3_1-vbus: Retrying from deferred list
[ 5.582133][ T22] bus: 'platform': __driver_probe_device: matched device usb3_1-vbus with driver reg-fixed-voltage
[ 5.592771][ T22] bus: 'platform': really_probe: probing driver reg-fixed-voltage with device usb3_1-vbus
[ 5.602734][ T22] reg-fixed-voltage usb3_1-vbus: no init pinctrl state
[ 5.609849][ T22] usb3_1-vbus: 5000 mV, disabled
[ 5.614702][ T22] device: 'regulator.1': device_add
[ 5.620241][ T22] reg-fixed-voltage usb3_1-vbus: usb3_1-vbus supplying 5000000uV
[ 5.627878][ T22] driver: 'reg-fixed-voltage': driver_bound: bound to device 'usb3_1-vbus'
[ 5.636473][ T22] bus: 'platform': really_probe: bound device usb3_1-vbus to driver reg-fixed-voltage
[ 5.645968][ T22] devices_kset: Moving usb3_1-phy to end of list
[ 5.652190][ T22] platform usb3_1-phy: Retrying from deferred list
[ 5.658617][ T22] bus: 'platform': __driver_probe_device: matched device usb3_1-phy with driver usb_phy_generic
[ 5.668951][ T22] bus: 'platform': really_probe: probing driver usb_phy_generic with device usb3_1-phy
[ 5.678512][ T22] usb_phy_generic usb3_1-phy: no pinctrl handle
[ 5.684792][ T22] usb_phy_generic usb3_1-phy: Looking up vcc-supply from device tree
[ 5.692902][ T22] device: 'regulator:regulator.1--platform:usb3_1-phy': device_add
[ 5.700897][ T22] devices_kset: Moving usb3_1-phy to end of list
[ 5.707136][ T22] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1
[ 5.714856][ T22] usb_phy_generic usb3_1-phy: Looking up vbus-supply from device tree
[ 5.722908][ T22] usb_phy_generic usb3_1-phy: Looking up vbus-supply property in node /usb3_1-phy failed
[ 5.732643][ T22] usb_phy_generic usb3_1-phy: dummy supplies not allowed for exclusive requests
[ 5.741594][ T22] driver: 'usb_phy_generic': driver_bound: bound to device 'usb3_1-phy'
[ 5.749893][ T22] bus: 'platform': really_probe: bound device usb3_1-phy to driver usb_phy_generic
[ 5.759101][ T22] devices_kset: Moving f10f8000.usb3 to end of list
[ 5.765599][ T22] platform f10f8000.usb3: Retrying from deferred list
[ 5.772344][ T22] bus: 'platform': __driver_probe_device: matched device f10f8000.usb3 with driver xhci-hcd
[ 5.782331][ T22] bus: 'platform': really_probe: probing driver xhci-hcd with device f10f8000.usb3
[ 5.791547][ T22] xhci-hcd f10f8000.usb3: no pinctrl handle
[ 5.797688][ T22] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.803844][ T22] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 5.815748][ T22] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 5.825904][ T22] xhci-hcd f10f8000.usb3: irq 45, io mem 0xf10f8000
[ 5.832874][ T22] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 5.838959][ T22] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 5.847221][ T22] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 5.854811][ T22] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[ 5.863880][ T22] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.871843][ T22] usb usb2: Product: xHCI Host Controller
[ 5.873495][ T113] ata2: SATA link down (SStatus 100 SControl 300)
[ 5.877560][ T22] usb usb2: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 xhci-hcd
[ 5.883845][ T113] ata2: limiting SATA link speed to 1.5 Gbps
[ 5.892342][ T22] usb usb2: SerialNumber: f10f8000.usb3
[ 5.903671][ T22] device: 'usb2': device_add
[ 5.908401][ T22] bus: 'usb': add device usb2
[ 5.913341][ T22] bus: 'usb': __driver_probe_device: matched device usb2 with driver usb
[ 5.921835][ T22] bus: 'usb': really_probe: probing driver usb with device usb2
[ 5.929553][ T22] device: '2-0:1.0': device_add
[ 5.934415][ T22] bus: 'usb': add device 2-0:1.0
[ 5.939337][ T22] bus: 'usb': __driver_probe_device: matched device 2-0:1.0 with driver hub
[ 5.947963][ T22] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[ 5.955808][ T22] hub 2-0:1.0: USB hub found
[ 5.960405][ T22] hub 2-0:1.0: 1 port detected
[ 5.965266][ T22] device: 'usb2-port1': device_add
[ 5.970351][ T22] usb usb2-port1: adding component (ops connector_ops)
[ 5.977190][ T22] driver: 'hub': driver_bound: bound to device '2-0:1.0'
[ 5.984226][ T22] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub
[ 5.991687][ T22] device: 'ep_81': device_add
[ 5.996344][ T22] driver: 'usb': driver_bound: bound to device 'usb2'
[ 6.003061][ T22] bus: 'usb': really_probe: bound device usb2 to driver usb
[ 6.010293][ T22] device: 'ep_00': device_add
[ 6.015169][ T22] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.024305][ T22] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[ 6.033315][ T22] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.041298][ T22] usb usb3: Product: xHCI Host Controller
[ 6.046928][ T22] usb usb3: Manufacturer: Linux 6.2.0-rc6-M95D-00001-gd783bde80fb1 xhci-hcd
[ 6.055514][ T22] usb usb3: SerialNumber: f10f8000.usb3
[ 6.060956][ T22] device: 'usb3': device_add
[ 6.065662][ T22] bus: 'usb': add device usb3
[ 6.070546][ T22] bus: 'usb': __driver_probe_device: matched device usb3 with driver usb
[ 6.078914][ T22] bus: 'usb': really_probe: probing driver usb with device usb3
[ 6.086614][ T22] device: '3-0:1.0': device_add
[ 6.091431][ T22] bus: 'usb': add device 3-0:1.0
[ 6.096360][ T22] bus: 'usb': __driver_probe_device: matched device 3-0:1.0 with driver hub
[ 6.104967][ T22] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0
[ 6.112790][ T22] hub 3-0:1.0: USB hub found
[ 6.117341][ T22] hub 3-0:1.0: 1 port detected
[ 6.122113][ T22] device: 'usb3-port1': device_add
[ 6.127206][ T22] usb usb3-port1: adding component (ops connector_ops)
[ 6.134074][ T22] driver: 'hub': driver_bound: bound to device '3-0:1.0'
[ 6.141051][ T22] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub
[ 6.148534][ T22] device: 'ep_81': device_add
[ 6.153173][ T22] driver: 'usb': driver_bound: bound to device 'usb3'
[ 6.159906][ T22] bus: 'usb': really_probe: bound device usb3 to driver usb
[ 6.167122][ T22] device: 'ep_00': device_add
[ 6.171748][ T22] driver: 'xhci-hcd': driver_bound: bound to device 'f10f8000.usb3'
[ 6.179703][ T22] bus: 'platform': really_probe: bound device f10f8000.usb3 to driver xhci-hcd
[ 6.188719][ T1] device class 'ubi': registering
[ 6.193754][ T1] device: 'ubi_ctrl': device_add
[ 6.200728][ T1] Waiting 100 sec before mounting root device...
[ 6.713487][ T201] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 6.833478][ T113] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.840791][ T113] ata2.15: Port Multiplier 1.2, 0x197b:0x0325 r193, 8 ports, feat 0xf/0x1f
[ 6.849421][ T113] device: 'link2.0': device_add
[ 6.854363][ T113] device: 'link2.0': device_add
[ 6.859268][ T113] device: 'dev2.0.0': device_add
[ 6.864156][ T113] device: 'dev2.0.0': device_add
[ 6.869153][ T113] device: 'link2.1': device_add
[ 6.873934][ T113] device: 'link2.1': device_add
[ 6.878791][ T113] device: 'dev2.1.0': device_add
[ 6.883657][ T113] device: 'dev2.1.0': device_add
[ 6.888636][ T113] device: 'link2.2': device_add
[ 6.893392][ T113] device: 'link2.2': device_add
[ 6.898284][ T113] device: 'dev2.2.0': device_add
[ 6.903128][ T113] device: 'dev2.2.0': device_add
[ 6.908111][ T113] device: 'link2.3': device_add
[ 6.912869][ T113] device: 'link2.3': device_add
[ 6.917726][ T113] device: 'dev2.3.0': device_add
[ 6.922572][ T113] device: 'dev2.3.0': device_add
[ 6.927555][ T113] device: 'link2.4': device_add
[ 6.932314][ T113] device: 'link2.4': device_add
[ 6.937177][ T113] device: 'dev2.4.0': device_add
[ 6.942024][ T113] device: 'dev2.4.0': device_add
[ 6.947001][ T113] device: 'link2.5': device_add
[ 6.951761][ T113] device: 'link2.5': device_add
[ 6.956635][ T113] device: 'dev2.5.0': device_add
[ 6.961483][ T113] device: 'dev2.5.0': device_add
[ 6.966462][ T113] device: 'link2.6': device_add
[ 6.971223][ T113] device: 'link2.6': device_add
[ 6.976084][ T113] device: 'dev2.6.0': device_add
[ 6.980939][ T113] device: 'dev2.6.0': device_add
[ 6.985953][ T113] device: 'link2.7': device_add
[ 6.990720][ T113] device: 'link2.7': device_add
[ 6.995600][ T113] device: 'dev2.7.0': device_add
[ 7.000451][ T113] device: 'dev2.7.0': device_add
[ 7.005439][ T113] device: 'link2.8': device_add
[ 7.010203][ T113] device: 'link2.8': device_add
[ 7.015076][ T113] device: 'dev2.8.0': device_add
[ 7.019926][ T113] device: 'dev2.8.0': device_add
[ 7.024908][ T113] device: 'link2.9': device_add
[ 7.029672][ T113] device: 'link2.9': device_add
[ 7.034545][ T113] device: 'dev2.9.0': device_add
[ 7.039396][ T113] device: 'dev2.9.0': device_add
[ 7.044391][ T113] device: 'link2.10': device_add
[ 7.049245][ T113] device: 'link2.10': device_add
[ 7.054199][ T113] device: 'dev2.10.0': device_add
[ 7.059139][ T113] device: 'dev2.10.0': device_add
[ 7.064224][ T113] device: 'link2.11': device_add
[ 7.069079][ T113] device: 'link2.11': device_add
[ 7.074042][ T113] device: 'dev2.11.0': device_add
[ 7.078984][ T113] device: 'dev2.11.0': device_add
[ 7.084093][ T113] device: 'link2.12': device_add
[ 7.088950][ T113] device: 'link2.12': device_add
[ 7.093916][ T113] device: 'dev2.12.0': device_add
[ 7.098859][ T113] device: 'dev2.12.0': device_add
[ 7.103942][ T113] device: 'link2.13': device_add
[ 7.108800][ T113] device: 'link2.13': device_add
[ 7.113780][ T113] device: 'dev2.13.0': device_add
[ 7.118725][ T113] device: 'dev2.13.0': device_add
[ 7.123808][ T113] device: 'link2.14': device_add
[ 7.128667][ T113] device: 'link2.14': device_add
[ 7.133635][ T113] device: 'dev2.14.0': device_add
[ 7.138581][ T113] device: 'dev2.14.0': device_add
[ 7.143662][ T113] ahci-mvebu f10a8000.sata: FBS is enabled
[ 7.149993][ T113] ata2.00: hard resetting link
[ 7.180668][ T201] usb 2-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 7.189672][ T201] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.197569][ T201] usb 2-1: Product: Mass Storage
[ 7.202390][ T201] usb 2-1: Manufacturer: Generic
[ 7.207242][ T201] usb 2-1: SerialNumber: 016E07B1
[ 7.212167][ T201] device: '2-1': device_add
[ 7.216803][ T201] bus: 'usb': add device 2-1
[ 7.221626][ T201] bus: 'usb': __driver_probe_device: matched device 2-1 with driver usb
[ 7.229942][ T201] bus: 'usb': really_probe: probing driver usb with device 2-1
[ 7.237468][ T201] usb 2-1: no default pinctrl state
[ 7.243329][ T201] device: '2-1:1.0': device_add
[ 7.248194][ T201] bus: 'usb': add device 2-1:1.0
[ 7.253118][ T201] bus: 'usb': __driver_probe_device: matched device 2-1:1.0 with driver usb-storage
[ 7.262452][ T201] bus: 'usb': really_probe: probing driver usb-storage with device 2-1:1.0
[ 7.270986][ T201] usb-storage 2-1:1.0: no default pinctrl state
[ 7.277185][ T201] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 7.284403][ T201] device: 'scsi_tmf_2': device_add
[ 7.289424][ T201] bus: 'workqueue': add device scsi_tmf_2
[ 7.295374][ T201] scsi host2: usb-storage 2-1:1.0
[ 7.300416][ T201] device: 'host2': device_add
[ 7.305042][ T201] bus: 'scsi': add device host2
[ 7.309848][ T201] device: 'host2': device_add
[ 7.314708][ T201] driver: 'usb-storage': driver_bound: bound to device '2-1:1.0'
[ 7.322384][ T201] bus: 'usb': really_probe: bound device 2-1:1.0 to driver usb-storage
[ 7.330593][ T201] device: 'ep_01': device_add
[ 7.335248][ T201] device: 'ep_82': device_add
[ 7.339884][ T201] driver: 'usb': driver_bound: bound to device '2-1'
[ 7.346517][ T201] bus: 'usb': really_probe: bound device 2-1 to driver usb
[ 7.353671][ T201] device: 'ep_00': device_add
[ 7.486174][ T113] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.493398][ T113] ata2.01: hard resetting link
[ 7.826136][ T113] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.833353][ T113] ata2.02: hard resetting link
[ 8.166136][ T113] ata2.02: SATA link down (SStatus 0 SControl 300)
[ 8.172603][ T113] ata2.03: hard resetting link
[ 8.395831][ T201] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 8.404822][ T201] device: 'target2:0:0': device_add
[ 8.409961][ T201] bus: 'scsi': add device target2:0:0
[ 8.415397][ T201] device: '2:0:0:0': device_add
[ 8.420330][ T201] bus: 'scsi': add device 2:0:0:0
[ 8.425328][ T201] scsi 2:0:0:0: scheduling asynchronous probe
[ 8.431348][ T201] device: '2:0:0:0': device_add
[ 8.431369][ T22] bus: 'scsi': __driver_probe_device: matched device 2:0:0:0 with driver sd
[ 8.436365][ T201] device: '2:0:0:0': device_add
[ 8.444766][ T22] bus: 'scsi': really_probe: probing driver sd with device 2:0:0:0
[ 8.457323][ T22] sd 2:0:0:0: no default pinctrl state
[ 8.462925][ T22] device: '2:0:0:0': device_add
[ 8.468998][ T22] sd 2:0:0:0: [sda] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[ 8.478142][ T22] sd 2:0:0:0: [sda] Write Protect is off
[ 8.483700][ T22] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 8.490182][ T22] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 8.500128][ T22] device: 'sda': device_add
[ 8.505303][ T22] device: '8:0': device_add
[ 8.507981][ T113] ata2.03: SATA link down (SStatus 0 SControl 300)
[ 8.516425][ T113] ata2.04: hard resetting link
[ 8.525164][ T22] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 8.531387][ T22] driver: 'sd': driver_bound: bound to device '2:0:0:0'
[ 8.538335][ T22] bus: 'scsi': really_probe: bound device 2:0:0:0 to driver sd
[ 8.545813][ T22] sd 2:0:0:0: async probe completed
[ 8.846145][ T113] ata2.04: SATA link down (SStatus 0 SControl 300)
[ 8.852618][ T113] ata2.05: hard resetting link
[ 9.186137][ T113] ata2.05: SATA link down (SStatus 0 SControl 300)
[ 9.192606][ T113] ata2.06: hard resetting link
[ 9.526131][ T113] ata2.06: SATA link down (SStatus 0 SControl 300)
[ 9.532597][ T113] ata2.07: hard resetting link
[ 9.866143][ T113] ata2.07: SATA link down (SStatus 0 SControl 300)
[ 9.872700][ T113] ata2.00: ATA-6: WDC WD50ARC-5040-VOL#01, 0100 AX, max UDMA/133
[ 9.880350][ T113] ata2.00: 976773168 sectors, multi 0: LBA48
[ 9.886469][ T113] ata2.00: configured for UDMA/133
[ 9.891543][ T113] ata2.01: ATA-6: Areca Archive, 0100 AX, max UDMA/133
[ 9.898484][ T113] ata2.01: 23437498368 sectors, multi 0: LBA48
[ 9.904761][ T113] ata2.01: configured for UDMA/133
[ 9.909902][ T113] ata2: EH complete
[ 9.914304][ T201] scsi 1:0:0:0: Direct-Access ATA WDC WD50ARC-5040 n/a PQ: 0 ANSI: 5
[ 9.924024][ T201] device: 'target1:0:0': device_add
[ 9.929148][ T201] bus: 'scsi': add device target1:0:0
[ 9.934522][ T201] device: '1:0:0:0': device_add
[ 9.939530][ T201] bus: 'scsi': add device 1:0:0:0
[ 9.944518][ T201] scsi 1:0:0:0: scheduling asynchronous probe
[ 9.950515][ T201] device: '1:0:0:0': device_add
[ 9.950530][ T22] bus: 'scsi': __driver_probe_device: matched device 1:0:0:0 with driver sd
[ 9.955446][ T201] device: '1:0:0:0': device_add
[ 9.963876][ T22] bus: 'scsi': really_probe: probing driver sd with device 1:0:0:0
[ 9.969160][ T201] scsi 1:1:0:0: Direct-Access ATA Areca Archive n/a PQ: 0 ANSI: 5
[ 9.976414][ T22] sd 1:0:0:0: no default pinctrl state
[ 9.986095][ T201] device: 'target1:1:0': device_add
[ 9.990662][ T22] device: '1:0:0:0': device_add
[ 9.995694][ T201] bus: 'scsi': add device target1:1:0
[ 10.001292][ T22] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 10.005739][ T201] device: '1:1:0:0': device_add
[ 10.014094][ T22] sd 1:0:0:0: [sdb] Write Protect is off
[ 10.018913][ T201] bus: 'scsi': add device 1:1:0:0
[ 10.024182][ T22] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.024521][ T22] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.029129][ T201] scsi 1:1:0:0: scheduling asynchronous probe
[ 10.035141][ T22] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 10.044710][ T201] device: '1:1:0:0': device_add
[ 10.050663][ T22] device: 'sdb': device_add
[ 10.057645][ T201] device: '1:1:0:0': device_add
[ 10.062473][ T8] bus: 'scsi': __driver_probe_device: matched device 1:1:0:0 with driver sd
[ 10.073944][ T22] device: '8:16': device_add
[ 10.080044][ T8] bus: 'scsi': really_probe: probing driver sd with device 1:1:0:0
[ 10.085794][ T22] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 10.092278][ T8] sd 1:1:0:0: no default pinctrl state
[ 10.098515][ T22] driver: 'sd': driver_bound: bound to device '1:0:0:0'
[ 10.103921][ T8] device: '1:1:0:0': device_add
[ 10.110722][ T22] bus: 'scsi': really_probe: bound device 1:0:0:0 to driver sd
[ 10.116166][ T8] sd 1:1:0:0: [sdc] 23437498368 512-byte logical blocks: (12.0 TB/10.9 TiB)
[ 10.122869][ T22] sd 1:0:0:0: async probe completed
[ 10.131515][ T8] sd 1:1:0:0: [sdc] Write Protect is off
[ 10.142064][ T8] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 10.147997][ T8] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.157973][ T8] sd 1:1:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 10.164952][ T8] device: 'sdc': device_add
[ 10.169986][ T8] device: '8:32': device_add
[ 10.175532][ T8] sd 1:1:0:0: [sdc] Attached SCSI removable disk
[ 10.181753][ T8] driver: 'sd': driver_bound: bound to device '1:1:0:0'
[ 10.188650][ T8] bus: 'scsi': really_probe: bound device 1:1:0:0 to driver sd
[ 10.196111][ T8] sd 1:1:0:0: async probe completed
Marius Dinu
