On Thu, 2009-10-08 at 12:42 -0400, Bernie Innocenti wrote: > El Tue, 06-10-2009 a las 23:13 -0400, Mark Lord escribió: > I want to try reducing the frequency of the PCI-X bus, but the BIOS does > not seem to provide a setting for it. Is there another way? Generally this is done with a physical jumper on the board instead. You'll find it near to the bridge chip, which is almost always by NEC. Another technique to slow the bridge down is to insert a regular PCI card in the other slot (these bridges tend to offer 2 or 3 slots). As the weakest link, it'll drag everything down to 33MHz. An old PCI-X 66MHz-only card may prove helpful here as well. You don't have to drive it in any way; getting power to it is sufficient. Regards, Tony V.
Attachment:
signature.asc
Description: This is a digitally signed message part
