Tony Battersby wrote:
Tejun Heo wrote:
Hello,
Tony Battersby wrote:
Sorry it took so long. I have attached the output of lspci when booting
without a SATA disk attached, and also when booting with a SATA disk
attached.
00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0])
...
90: 40 00 11 10 80 01 00 40 00 00 00 00 00 00 00 00
^^^^^
PCS 0x1011
Port 0 and 4 enabled and 4 present. Does "setpci -s 1f.2 93b=f" fix
hotplugging?
setpci gives the following error:
pcilib: sysfs_write: tried to write 1 bytes at 2363, but only 0 succeeded
lspci shows no difference before and after.
I assume that was done as root?
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html