Re: AHCI problem with hotplug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Tony Battersby wrote:
> Sorry it took so long.  I have attached the output of lspci when booting
> without a SATA disk attached, and also when booting with a SATA disk
> attached.

00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0])
...
90: 40 00 11 10 80 01 00 40 00 00 00 00 00 00 00 00
          ^^^^^
	  PCS 0x1011

Port 0 and 4 enabled and 4 present.  Does "setpci -s 1f.2 93b=f" fix
hotplugging?

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux