Tejun Heo wrote: > Hello, > > Tony Battersby wrote: > >> Sorry it took so long. I have attached the output of lspci when booting >> without a SATA disk attached, and also when booting with a SATA disk >> attached. >> > > 00:1f.2 SATA controller [0106]: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller [8086:27c1] (rev 01) (prog-if 01 [AHCI 1.0]) > ... > 90: 40 00 11 10 80 01 00 40 00 00 00 00 00 00 00 00 > ^^^^^ > PCS 0x1011 > > Port 0 and 4 enabled and 4 present. Does "setpci -s 1f.2 93b=f" fix > hotplugging? > > setpci gives the following error: pcilib: sysfs_write: tried to write 1 bytes at 2363, but only 0 succeeded lspci shows no difference before and after. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
