Hi,
Tejun Heo napisał(a):
> Michal Piotrowski wrote:
>> Hi Jeff,
>>
>> I've got some problems with my SATA controller on crashdump kernel.
>>
>> Calling initcall 0xc1916081: fc_transport_init+0x0/0x35()
>> Calling initcall 0xc19160b6: init_sd+0x0/0xbc()
>> Calling initcall 0xc19161ec: piix_init+0x0/0x27()
>> ata_piix 0000:00:1f.2: version 2.10
>> ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>> ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 5 (level,
>> low) -> IRQ 5
>> PCI: Setting latency timer of device 0000:00:1f.2 to 64
>> ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400
>> irq 5
>> ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408
>> irq 5
>> scsi0 : ata_piix
>> PM: Adding info for No Bus:host0
>> ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
>> ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> ata1.00: qc timeout (cmd 0xef)
>> ata1.00: failed to set xfermode (err_mask=0x4)
>
> Does giving 'irqpoll' boot parameter fix the problem?
>
Hmmm... it works.
Calling initcall 0xc19154d8: piix_ide_init+0x0/0xbb()
Calling initcall 0xc19155b6: generic_ide_init+0x0/0x16()
Calling initcall 0xc191572e: ide_init+0x0/0x81()
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
irq 5: nobody cared (try booting with the "irqpoll" option)
[<c1604556>] show_trace_log_lvl+0x1a/0x2f
[<c1604c2c>] show_trace+0x12/0x14
[<c1604cde>] dump_stack+0x16/0x18
[<c164341c>] __report_bad_irq+0x39/0x79
[<c16435eb>] note_interrupt+0x18f/0x1c8
[<c1643ec6>] handle_level_irq+0x95/0xcb
[<c1605dd8>] do_IRQ+0xb4/0xe0
=======================
handlers:
[<c174f55e>] (skge_intr+0x0/0x3ff)
Disabling IRQ #5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
Is this an IDE or skge bug?
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc3-git4-kdump/git-config
Thomas, Ingo - this soft lockup with irqpoll seems to be fixed
http://www.ussg.iu.edu/hypermail/linux/kernel/0703.0/index.html#1116
Thanks!
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
