2.6.21-rc3-git4 ata1.00: qc timeout (cmd 0xef) (crashdump kernel)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jeff,

I've got some problems with my SATA controller on crashdump kernel.

Calling initcall 0xc1916081: fc_transport_init+0x0/0x35()
Calling initcall 0xc19160b6: init_sd+0x0/0xbc()
Calling initcall 0xc19161ec: piix_init+0x0/0x27()
ata_piix 0000:00:1f.2: version 2.10
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 5 (level,
low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 5
ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 5
scsi0 : ata_piix
PM: Adding info for No Bus:host0
ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1.00: limiting speed to UDMA/133:PIO3
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1.00: disabled
scsi1 : ata_piix
PM: Adding info for No Bus:host1
ata2.00: ATA-7: Maxtor 6Y200M0, YAR51BW0, max UDMA/133
ata2.00: 398297088 sectors, multi 16: LBA48

/sbin/lspci  -vvv
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA
Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
       Subsystem: ASUSTeK Computer Inc. P4P800 SE Mainboard
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Interrupt: pin A routed to IRQ 19
       Region 0: I/O ports at cc00 [size=8]
       Region 1: I/O ports at c880 [size=4]
       Region 2: I/O ports at c800 [size=8]
       Region 3: I/O ports at c480 [size=4]
       Region 4: I/O ports at c400 [size=16]

http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc3-git4-kdump/console.log
http://www.stardust.webpages.pl/files/tbf/bitis-gabonica/2.6.21-rc3-git4-kdump/git-config

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux