Michal Piotrowski wrote: > Hi Jeff, > > I've got some problems with my SATA controller on crashdump kernel. > > Calling initcall 0xc1916081: fc_transport_init+0x0/0x35() > Calling initcall 0xc19160b6: init_sd+0x0/0xbc() > Calling initcall 0xc19161ec: piix_init+0x0/0x27() > ata_piix 0000:00:1f.2: version 2.10 > ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] > ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 5 (level, > low) -> IRQ 5 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 > irq 5 > ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 > irq 5 > scsi0 : ata_piix > PM: Adding info for No Bus:host0 > ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133 > ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata1.00: qc timeout (cmd 0xef) > ata1.00: failed to set xfermode (err_mask=0x4) Does giving 'irqpoll' boot parameter fix the problem? -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
