2008/6/19 Antti Palosaari <crope@xxxxxx>:
I'll have a look at it again now you've come up with some hints, but if I don't get anywhere, it'd be great if you can have a look at it when you return from holiday.
Thanks mate,
Andrew
Looks like small changes to m9206 driver is needed. MT2060 tuner needs
IF1, i2c-address and output clock bit (0/1 if I remeber correctly..).
Those can be seen from windows sniffs or by guessing / testing. IF1 is
easy to set default one, 1220, wrong IF1 only decreases performance. If
there is eeprom used then value is normally read from there, otherwose
just set default. clock is easy to test. I don´t know how many i2c-address
are supported by chip, but most probably there is not too many. Hopefully
only 4. You can look from specs or from other drivers what i2c-addresses
are used for mt2060. I think it will take 2-10 test to find correct values
by trial and error method.
I am now on holiday trip, but next week - monday or tuesday I can fix that
driver that if anyone else haven´t done already.
regards
Antti
I'll have a look at it again now you've come up with some hints, but if I don't get anywhere, it'd be great if you can have a look at it when you return from holiday.
Thanks mate,
Andrew
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
