Maybe this is an hint that will enable you to find the problem. I just
looked at the dmesg messages right after I tried ./simpledvbtune -f
11954 and well this are the messages:
pctv452e_power_ctrl: 1
ioctl32(simpledvbtune:5591): Unknown cmd fd(3)
cmd(80046f57){t:'o';sz:4} arg(ff8c43e8) on /dev/dvb/adapter0/frontend0
lnbp22_set_voltage: 1 (18V=1 13V=0)
lnbp22_set_voltage: 0x72)
ioctl32(simpledvbtune:5591): Unknown cmd fd(3)
cmd(80ac6f53){t:'o';sz:172} arg(ff8c433c) on /dev/dvb/adapter0/frontend0
lnbp22_set_voltage: 2 (18V=1 13V=0)
lnbp22_set_voltage: 0x60)
pctv452e_power_ctrl: 0
Maybe that helps..
Oh I almost forgot. The leds on the Receiver. After loading the kernel
modules they go from orange to green. After trying simpledvbtune they
go from green to orange and never back.
Michael
Dominik Kuhlen schrieb:
On Sunday 08 June 2008, Michael Schöller wrote:
Dominik Kuhlen schrieb:
Hi,
I have attached a step-by-step howto for these devices
Happy testing,
Dominik
------------------------------------------------------------------------
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Well bad news...it's not working.
I try to notice any difference in my system to your description and well
it's not much...
My dmesg line:
stb0899_get_dev_id: Device ID=[3], Release=[1]
Your dmesg line:
stb0899_get_dev_id: Device ID=[3], Release=[0]
all other dmesg messages are identical.
next difference
ls -l /dev/dvb/adapter0/
# total 0
# crw------- 1 schomi root 212, 4 Jun 7 15:37 demux0
# crw------- 1 schomi root 212, 5 Jun 7 15:37 dvr0
# crw------- 1 schomi root 212, 3 Jun 7 15:37 frontend0
# crw------- 1 schomi root 212, 7 Jun 7 15:37 net0
well just do be sure I also tried chmod a+rw * but that didn't change anything. Well since schomi is my user I think that should be ok...
So now to the real problem...
./simpledvbtune -f 11954
using '/dev/dvb/adapter0/frontend0' as frontend
frontend fd=3: type=0
DVBFE_SET_DELSYS: Invalid argument
ioclt: FE_SET_VOLTAGE : 1
High band
tone: 1
dvbfe setparams : delsys=1 1354MHz / Rate : 27500kBPS
DVBFE_SET_PARAMS: Invalid argument
tuning qpsk failed
Hmm, this is strange. looks like you are using old drivers or old dvb-core module that doesn't support the new ioctls
Did you load the modules with
insmod ./dvb-core.ko
insmod ./dvb-usb.ko
insmod ./lnbp22.ko
insmod ./stb0899.ko
insmod ./stb6100.ko
insmod ./dvb-usb-pctv452e.ko
to be sure that no old/other modules were used?
@Dominik
By any chance do you live in austria and can visit me ^^.
No, sorry I don't.
Michael
Dominik
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
|
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
