Re: Dposh DVB-T USB2.0 seems to not work properly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





2008/6/11 Antti Palosaari <crope@xxxxxx>:
Andrew Websdale wrote:
I got the front end info from dvbsnoop last night & it says its a Zarlink MT352, but I should try to open the stick anyway to clear up exactly what chips it uses, although I think its moulded plastics so I'll have to cut it open.
Andrew

If dvbsnoop says that there is Zarlink MT352, then there should be.

It should be also seen from the log, try to look your message.log again to see if there is mention about Zarlink MT352 demodulator / frontend and Quantek QT1010 tuner.

It could be also possible that tuner is not working.

Antti
--
http://palosaari.fi/



I've examined the logs, & I can find no mention of a Quantek tuner - your suggestion of a non-working tuner seems likely, as tuning is what doesn't seem to work when I run e.g. w_scan - can you make any suggestion as to where I go from here? I'm more than willing to test new code etc.
regards Andrew

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux