pjama wrote: > Hi Antti, > > Antti Palosaari wrote: >> pjama wrote: >>> Do you mean in /lib/firmware/kernel.... ? Do you have a copy of the >>> latest firmware. I think my source may be suspect. >> /lib/firmware/ >> /lib/firmware/kernel<version>/ >> >> I think both are OK, but other is loaded bigger priority by kernel. I >> think directory with kernel version has looked first. You have 4.73.0 in >> other directory and other has 4.95.0 ? >> >> Different firmware files can be found from: >> http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/ >> > > OK I have no firmware in /lib/firmware, it is all in the kernel directory. I have copied the file from the above URL which is the one I've been using and I still get "af9013: firmware version:4.73.0" in dmesg. Full 9015 relevant dmesg below. Is that possible that you are looking firmware file from wrong directory? I mean that you have for example /lib/firmware/kernel-2.6.1/ and /lib/firmware/kernel-2.6.2/ other having 4.73 and the other 4.95? Remove all af9015 firmwares from kernel-x.x.x directories and leave 4.95.0 to /lib/firmware/. Then take unplug stick and boot machine and plug stick again. I see from dmesg log that firmware copy to 2nd frontend fails. This is due to fact that currently driver has hard coded checksum for 4.95.0. > I'm not sure it's a problem at this point as I've at least got TV but you may be interested from a developer point of view as there are a few errors in the dmesg. > > On a related note: What are the chances of getting the remote that came with the usb stick working? It's this one: > http://www.digitalnow.com.au/images/ProRemote.jpg It should be polled. There is code for than in the driver already, but it is disabled currently. > > Thanks for all your efforts > > Peter Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb