Hello, Thank you for your hint, and sry for the late response - had some finals for this term - todays my first day of hollidays, so i spent some time on the LR506 thing again. I have played i bit with the patch. You had right, that m920x_identify_state wont work. But imho, if the usb-DevID=0x506, then it is in cold-state, so setting ".identify_state = NULL" should to the work. I set ".usb_ctrl = CYPRESS_FX2" to use the native functions provided in dvb-usb-firmware.c to download the firmware. Than i tryed to figure out the binary format of the .fw file. I guess I got it right. I wrote a script which converts the snooped data into the propriated format. I gave it a try and to my surprise it worked :) So, for short: Now I am able to download the fw to the cold device and lsusb tells afterwards, that the device has re-registered as the warm one (DevID=0x0500). The firmware can be found at: http://danyserv.selfip.org/dir/LifeView/dvb-usb-tvwalker-lr506.fw Now i have to figure out, how i can attach a frontend to it. No Idea how this will work - but ill play a bit with it. Thx for the hint, again. And if someone could give me some tipps I would be glad. -Daniel Am Wed, 27 Jun 2007 19:41:03 +0200 hat Aapo Tahkola <aet@xxxxxxxxxxxxxx> geschrieben: > On Wed, 20 Jun 2007 14:14:14 +0200 > "Daniel Weigl" <danielweigl@xxxxxx> wrote: > >> Hello Nick, >> >> Thx for your replies! >> > > Take a look at > http://www.rasterburn.org/~aet/m920x/m920x-twalker-rl506.patch > This driver should not belong to m920x.c since it's not based on m920x > (noticed that afterwards). > > Couple notes: > - m920x_identify_state will most likely not work for your device > - m920x_firmware_download routine should not be used for this > device(assuming you have to dl firmware) > - you need to make sure adapter field of tvwalker_lr506_properties is > properly filled > > You can examine other drivers that use CY7C68013A(FX2) to figure out > what still needs to be done. > > Couple pointers: > 19:30 < mkrufky> most likely, the dvb-usb-firmware's default > CYPRESS_FX2 handling should do the job > > 19:31 < mkrufky> you may want to > look at the FIRST entry in cxusb, for the medion 95700, for an example > of what a typical dvb_usb_device_properties struct looks like for an > FX2 device > > 19:31 < mkrufky> (dont look at the bluebird ones -- we had > to override the firmware download routing with a USB PID firmware patch) -- Erstellt mit Operas revolutionärem E-Mail-Modul: http://www.opera.com/mail/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
