Hello, The wiki states that the "LifeView TV Walker P Plus"-USB DVB-T Decoder is currently not supported. It is commented that: > If you have one of these devices then send an email to the mailinglist > at <linux-dvb@xxxxxxxxxxx> and support can probably be added > fairly quickly. [ http://linuxtv.org/v4lwiki/index.php/LifeView ] For now i was not able to find the according site on lifeview.com. Optical it looks ident to the "TV Walker Q2" [ http://www.lifeview.com.tw/html/products/external_tv/tv_walker_q2.htm ], but mine is labeled as "LR506". Some informations: lsusb: "Bus 006 Device 013: ID 10fd:0506 Anubis Electronics, Ltd" from /proc/bus/usb/devices: T: Bus=06 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=10fd ProdID=0506 Rev= 0.01 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 0 Alt= 1 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 0 Alt= 2 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=02(O) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 0 Alt= 3 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=02(O) Atr=01(Isoc) MxPS= 512 Ivl=125us E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=01(Isoc) MxPS= 512 Ivl=125us E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms dmesg after plugging in: [38480.614363] usb 6-3: new high speed USB device using ehci_hcd and address 14 [38480.728784] PM: Adding info for usb:6-3 [38480.728967] PM: Adding info for No Bus:usbdev6.14_ep00 [38480.728997] usb 6-3: configuration #1 chosen from 1 choice [38480.729133] PM: Adding info for usb:6-3:1.0 [38480.729266] PM: Adding info for No Bus:usbdev6.14 dmesg after plugging out: [38515.702258] usb 6-3: USB disconnect, address 14 [38515.702309] PM: Removing info for usb:6-3:1.0 [38515.702385] PM: Removing info for No Bus:usbdev6.14 [38515.702435] PM: Removing info for No Bus:usbdev6.14_ep00 [38515.702532] PM: Removing info for usb:6-3 My System: CPU: Intel P4, HT, 3Ghz RAM: 2GB Ram MB: Asus P4P800-E Dlx OS: Kubuntu Feisty KERN: 2.6.21 KDE: 3.5.7 modinfo dvb-usb: filename: /lib/modules/2.6.21-mine3/kernel/drivers/media/dvb/dvb-usb/dvb-usb.ko license: GPL description: A library module containing commonly used USB and DVB function USB DVB devices author: Patrick Boettcher <patrick.boettcher@xxxxxxx> version: 1.0 srcversion: 5EE289AC20CAAF1D51A53D1 depends: dvb-pll,usbcore,dvb-core,i2c-core vermagic: 2.6.21-mine3 SMP preempt mod_unload PENTIUM4 parm: debug:set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256 (or- able)). (debugging is not enabled) (int) parm: force_pid_filter_usage:int parm: disable_rc_polling:disable remote control polling (default: 0). (int) modinfo tda826x filename: /lib/modules/2.6.21-mine3/kernel/drivers/media/dvb/frontends/tda826x.ko license: GPL author: Andrew de Quincey description: DVB TDA826x driver srcversion: E1EC7053D9EF709643631D6 depends: i2c-core vermagic: 2.6.21-mine3 SMP preempt mod_unload PENTIUM4 parm: debug:Turn on/off frontend debugging (default:off). (int) (as the wiki states that LifeView contains a TDA8275A) The top of the stick can be opened without loosing any screws (just glued down), beneath it I can see a miniature fan and two ICs Phillips 8275AC1 CY7C68013A (Cypress?) The outer cover on the bottom is also glued, but under it, is a metal plate screwed onto the pcb. Beneath it, ther I can see the TDA1004GHT SA1371.1 So, maybe this does not contain a 826x but a tda1004x modinfo tda1004x filename: /lib/modules/2.6.21-mine3/kernel/drivers/media/dvb/frontends/tda1004x.ko license: GPL author: Andrew de Quincey & Robert Schlabbach description: Philips TDA10045H & TDA10046H DVB-T Demodulator srcversion: 009F2274C425818D7459FA9 depends: i2c-core vermagic: 2.6.21-mine3 SMP preempt mod_unload PENTIUM4 parm: debug:Turn on/off frontend debugging (default:off). (int) I can run this device under Windows XP, running in a VMWare ontop of my Linux-OS, so if I should provide some USB-communication log, i will try to recorde some (never done before). Or if I can provide any other informations/to some tests, pls connact me. With best regards, Daniel Weigl -- Erstellt mit Operas revolutionärem E-Mail-Modul: http://www.opera.com/mail/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
