I just checked my setup. I actually just have the audio connected
directly to the motherboard line in jack.
Alsa 'capture' settings are
Line = Capture
Capture = Capture
Capture volume = 0. You can bump this up but I get clipping.
You can get a VU meter by running
arecord -f dat -D plug:dsnoop -v -v -v /dev/null
If that works and you already have aplay working, you can use
arecord -f dat -D plug:dsnoop | aplay
Perhaps some GPIO might enable the sound cable on the dvico card, I
don't know. Does it work under windows if you use the audio cable?
John.
Anthony Giggins wrote:
Yes I have the same card as you John
Vendor ID: 0x14f1
Device ID: 0x8800
Subsystem ID: 0xdb1018ac
Please let me know your alsa setting I have tried everything :(
-----Original Message-----
From: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx]
On Behalf Of Anthony Giggins
Sent: Saturday, 5 May 2007 11:35 PM
To: linux-dvb@xxxxxxxxxxx
Subject: RE: Divco Fusion HDTV DVB-T PlusNoAudio for
composite/s-video input
The card I have is subsystem: 18ac:db10 not sure where your getting the
14f1:8802 from.
Can you please tell me how you have configured your alsa I have tried
connecting the supplied cable too both the AUX and the CDROM inputs on the
SBlive sound card I am using.
I'll hopefully be attempting the regspy GPIO stuff tomorrow if all goes too
plan.
Thanks for the idea, keep them coming :)
-----Original Message-----
From: linux-dvb-bounces@xxxxxxxxxxx [mailto:linux-dvb-bounces@xxxxxxxxxxx]
On Behalf Of John Newbigin
Sent: Saturday, 5 May 2007 4:47 PM
To: linux-dvb@xxxxxxxxxxx
Subject: Re: Divco Fusion HDTV DVB-T Plus NoAudio for
composite/s-video input
Is this the 14f1:8802 Subsystem: 18ac:db10
If so, I have the same card. It does not support audio capture. You
must you the supplied cable to connect to you sound card aux/line in.
You then must configure alsa correctly to allow recording from the input
you are using (test with arecord | aplay)
I also found the analog capture on this card is rubbish and I would
recommend people avoid it. The digital works fine.
John.
Michael Krufky wrote:
Anthony Giggins wrote:
Hello Everyone,
I am using this card with Mythtv under mythdora distro (www.mythdora.com)
for DVB with minimal problems but I am unable too get any audio via
composite/s-video input, video works fine.
This is pretty much my last remaining problem, I've searched every
mailing
list I can think of and have several other people in the same boat in
varying distro's can anyone give me anything I can try, the passthrough
audio cable is plugged into my SB Live value card and I believe I have
alsa configured correctly but I could be wrong.
Please Help!
We may need to program the GPIO for those input muxes... Please see the
GPIO pins section, cx2388x subsection of the v4lwiki, located at
http://linuxtv.org/v4lwiki ... You'll need to use regspy, which is part of
the dscaler project, in conjunction with the DViCO windows drivers and
FusionHDTV application, in order to sniff the GPIO settings of the windows
driver. With that data, we should be able to resolve this problem for you.
I am looking at the current code, which sets gpio0 to 0x000027df ...
Perhaps this is inaccurate, or you have an alternate revision of this model.
Let me know what you find from regspy.
Good Luck,
Mike Krufky
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
