Mike Krufky wrote: > We may need to program the GPIO for those input muxes... Please see the > GPIO pins section, cx2388x subsection of the v4lwiki, located at > http://linuxtv.org/v4lwiki ... You'll need to use regspy, which is part of > the dscaler project, in conjunction with the DViCO windows drivers and > FusionHDTV application, in order to sniff the GPIO settings of the windows > driver. With that data, we should be able to resolve this problem for you. > > I am looking at the current code, which sets gpio0 to 0x000027df ... > Perhaps this is inaccurate, or you have an alternate revision of this > model. Let me know what you find from regspy. > > Good Luck, > > Mike Krufky Ok Regspy results gpio0 changes from 000026d9 too 000026dd When opening the FusionHDTV application and then changes back too 000026d9. I hope think information helps Anthony _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
