Marius van den Beek wrote: > Hello > > I have been trying to get my Twinhan Card VP-1022A to work with > the dvb-drivers of kernel 2.6.18 and/or the latest hg-snapshot. >>From what I read I thought the cad was supported, but when I load > the modules I get a a directory /dev/dvb/adapter0 wit demux0 dvr0 and net0, > but frontend0 seems to be missing. The dmesg output with bttv cardis > card with=113 and verbose=4 is as follows: > > Linux video capture interface: v2.00 > bttv: driver version 0.9.16 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Host bridge needs ETBF enabled. > bttv: Bt8xx card found (0). > PCI: setting IRQ 10 as level-triggered > PCI: Found IRQ 10 for device 0000:00:0f.0 > PCI: Sharing IRQ 10 with 0000:00:0f.1 > bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 10, latency: 128, mmio: > 0xde001000 > bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is > 1822:0001 > bttv0: using: Twinhan DST + clones [card=113,insmod option] > bttv0: enabling ETBF (430FX/VP3 compatibilty) > bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init] > bttv0: using tuner=4 > bttv0: add subdevice "dvb0" > bt878: AUDIO driver version 0.0.0 loaded > bt878: Bt878 AUDIO function found (0). > PCI: Found IRQ 10 for device 0000:00:0f.1 > PCI: Sharing IRQ 10 with 0000:00:0f.0 > bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. > bt878(0): Bt878 (rev 17) at 00:0f.1, irq: 10, latency: 128, memory: > 0xde002000 > DVB: registering new adapter (bttv0). > dst(0) dst_comm_init: Initializing DST. > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] > dst(0) rdc_reset_state: Resetting state machine > dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] > dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] > writing [ 00 06 00 00 00 00 00 fa ] > dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) Looks like an I2C communication error. > dst(0) dst_error_recovery: Trying to return from previous errors. > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] > dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) > dst(0) dst_error_recovery: Trying to return from previous errors. > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] > dst(0) write_dst: RDC 8820 RESET > dst(0) dst_error_bailout: Trying to bailout from previous error. > dst(0) rdc_8820_reset: Resetting DST > dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] > dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] > dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] > dst(0) dst_probe: unknown device. > frontend_init: Could not find a Twinhan DST. > dvb-bt8xx: A frontend driver was not found for device 109e/0878 > subsystem 1822/0001 > I am running gentoo on a pentium3 system. > I hope someone can help me solve this problem. Is this happening on 2.6.18 only or on others as well ? Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
