Hello Marko, Marko Ristola wrote: > > I didn't read emails for a few days. > I don't have any specs for the hardware either. > > I'll try to figure out that what is the problem. > > I think that when the DMA transfer starts, cu1216_set_parameters() > should not be called at all. > The drivers should just keep on with the data transfer. > > One possible fix might be that cu1216_set_parameters() > would set the fixed values: they should not be changed during the data > transfer. > Maybe reading other similar drivers help with this. > > The other thing is that is it a bug or okay when the cu1216 is > nonresponsive during the data transfer. > > Manu, How is this supposed to work? Sorry i had been away the past few days. In fact dvb-core should start DMA only after there is a LOCK. I faced this issue (getting garbage in the DMA queue, before there is a valid LOCK), but i was able to get a LOCK, but that was with a DVB-S card, but the same bridge. Need to check a bit as to what's the exact issue in there. Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
