Hi, Am Sonntag, den 15.10.2006, 15:19 +1000 schrieb Graham Smith: > Hi, > > I was wondering if there is a way to get the remote control working with a > Kworld DVB-T 220RF card. I'm running SuSE 10.1. > > I presume it should work via the ir-kbd-i2c module which is installed but when > i do > cat /proc/bus/input/devices > I do not see any remote device listed. > > Any help would be greatly appreciated. > I'll try to give you an overview what happened so far on this new KS003 and KS007 chips. The initial research and patch was done by Henry Wong on a KS003 found on the MSI TV@nywhere Plus (saa7131e, tda8275ac1). The same chip is reported on cx88 Blackbird Kworld MCE200 Deluxe (17de:0841). Bob adapted the patch for the Kworld ATSC 110 (17de:7350) KS007. http://www.spinics.net/lists/vfl/msg28089.html The latest version for recent v4l-dvb mercurial and fixes by Dwaine can be found here. http://www.spinics.net/lists/vfl/msg28374.html See followups for further proceeding and remaining issues. Mike likely will need the signed-off-by Henry Wong, CCed. The remotes seem to be all slightly different, also for the Empire PCI Dual TV Plus4 17de:7250 (four buttons less than ATSC 110), guess you have the Tevion/Kworld 17de:7201 card, which has no picture of the remote in the bttv-gallery.de. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
