Hello I have been trying to get my Twinhan Card VP-1022A to work with the dvb-drivers of kernel 2.6.18 and/or the latest hg-snapshot. >From what I read I thought the cad was supported, but when I load the modules I get a a directory /dev/dvb/adapter0 wit demux0 dvr0 and net0, but frontend0 seems to be missing. The dmesg output with bttv cardis card with=113 and verbose=4 is as follows: Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:0f.0 PCI: Sharing IRQ 10 with 0000:00:0f.1 bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 10, latency: 128, mmio: 0xde001000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Found IRQ 10 for device 0000:00:0f.1 PCI: Sharing IRQ 10 with 0000:00:0f.0 bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. bt878(0): Bt878 (rev 17) at 00:0f.1, irq: 10, latency: 128, memory: 0xde002000 DVB: registering new adapter (bttv0). dst(0) dst_comm_init: Initializing DST. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) rdc_reset_state: Resetting state machine dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) dst(0) dst_error_recovery: Trying to return from previous errors. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) dst(0) dst_error_recovery: Trying to return from previous errors. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) write_dst: RDC 8820 RESET dst(0) dst_error_bailout: Trying to bailout from previous error. dst(0) rdc_8820_reset: Resetting DST dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_probe: unknown device. frontend_init: Could not find a Twinhan DST. dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001 And this is lspci -vv: 00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture ( rev 11) Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 128 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at de001000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11 ) Subsystem: Twinhan Technology Co. Ltd VisionPlus DVB Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 128 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at de002000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- I am running gentoo on a pentium3 system. I hope someone can help me solve this problem. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb