Re: No frontend for Twinhan VP-1022A Ver 2.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Marius van den Beek wrote:
> Manu Abraham wrote:
>   
>> Marius van den Beek wrote:
>>   
>>     
>>> Hello
>>>
>>> I have been trying to get my Twinhan Card VP-1022A to work with
>>> the dvb-drivers of kernel 2.6.18 and/or the latest hg-snapshot.
>>> >From what I read I thought the cad was supported, but when I load
>>> the modules I get a a directory  /dev/dvb/adapter0 wit demux0 dvr0 and net0,
>>> but frontend0 seems to be missing. The dmesg output with bttv cardis
>>> card with=113 and verbose=4 is as follows:
>>>
>>> Linux video capture interface: v2.00
>>> bttv: driver version 0.9.16 loaded
>>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>>> bttv: Host bridge needs ETBF enabled.
>>> bttv: Bt8xx card found (0).
>>> PCI: setting IRQ 10 as level-triggered
>>> PCI: Found IRQ 10 for device 0000:00:0f.0
>>> PCI: Sharing IRQ 10 with 0000:00:0f.1
>>> bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 10, latency: 128, mmio:
>>> 0xde001000
>>> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is
>>> 1822:0001
>>> bttv0: using: Twinhan DST + clones [card=113,insmod option]
>>> bttv0: enabling ETBF (430FX/VP3 compatibilty)
>>> bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init]
>>> bttv0: using tuner=4
>>> bttv0: add subdevice "dvb0"
>>> bt878: AUDIO driver version 0.0.0 loaded
>>> bt878: Bt878 AUDIO function found (0).
>>> PCI: Found IRQ 10 for device 0000:00:0f.1
>>> PCI: Sharing IRQ 10 with 0000:00:0f.0
>>> bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
>>> bt878(0): Bt878 (rev 17) at 00:0f.1, irq: 10, latency: 128, memory:
>>> 0xde002000
>>> DVB: registering new adapter (bttv0).
>>> dst(0) dst_comm_init: Initializing DST.
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
>>> dst(0) rdc_reset_state: Resetting state machine
>>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
>>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
>>> writing [ 00 06 00 00 00 00 00 fa ]
>>> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
>>>     
>>>       
>> Looks like an I2C communication error.
>>
>>
>>   
>>     
>>> dst(0) dst_error_recovery: Trying to return from previous errors.
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
>>> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
>>> dst(0) dst_error_recovery: Trying to return from previous errors.
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
>>> dst(0) write_dst: RDC 8820 RESET
>>> dst(0) dst_error_bailout: Trying to bailout from previous error.
>>> dst(0) rdc_8820_reset: Resetting DST
>>> dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
>>> dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
>>> dst(0) dst_probe: unknown device.
>>> frontend_init: Could not find a Twinhan DST.
>>> dvb-bt8xx: A frontend driver was not found for device 109e/0878
>>> subsystem 1822/0001
>>>     
>>>       
>>   
>>     
>>> I am running gentoo on a pentium3 system.
>>> I hope someone can help me solve this problem.
>>>     
>>>       
>> Is this happening on 2.6.18 only or on others as well ?
>>
>>   
>>     
> It happens on 2.6.12.6 as well. But I tried the mantis driver today and
> got a frontend0 device,
> but after rebooting I was not able to reproduce it. Very strange.
>   
I found the syslog entry for it:
Oct 15 15:24:15 Blackened kernel: Linux video capture interface: v2.00
Oct 15 15:24:15 Blackened kernel: bttv: driver version 0.9.16 loaded
Oct 15 15:24:15 Blackened kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Oct 15 15:24:15 Blackened kernel: bttv: Host bridge needs ETBF enabled.
Oct 15 15:24:15 Blackened kernel: bttv: Bt8xx card found (0).
Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 10
Oct 15 15:24:15 Blackened kernel: PCI: setting IRQ 10 as level-triggered
Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] ->
Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 15 15:24:15 Blackened kernel: bttv0: Bt878 (rev 17) at 0000:00:0f.0,
irq: 10, latency: 128, mmio: 0xde001000
Oct 15 15:24:15 Blackened kernel: bttv0: detected: Twinhan VisionPlus
DVB [card=113], PCI subsystem ID is 1822:0001
Oct 15 15:24:15 Blackened kernel: bttv0: using: Twinhan DST + clones
[card=113,autodetected]
Oct 15 15:24:15 Blackened kernel: bttv0: enabling ETBF (430FX/VP3
compatibilty)
Oct 15 15:24:15 Blackened kernel: bttv0: gpio: en=00000000, out=00000000
in=00f500ff [init]
Oct 15 15:24:15 Blackened kernel: bttv0: using tuner=4
Oct 15 15:24:15 Blackened kernel: bttv0: add subdevice "dvb0"
Oct 15 15:24:15 Blackened kernel: bt878: AUDIO driver version 0.0.0 loaded
Oct 15 15:24:15 Blackened kernel: bt878: Bt878 AUDIO function found (0).
Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] ->
Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 15 15:24:15 Blackened kernel: bt878_probe: card id=[0x11822],[
Twinhan VisionPlus DVB ] has DVB functions.
Oct 15 15:24:15 Blackened kernel: bt878(0): Bt878 (rev 17) at 00:0f.1,
irq: 10, latency: 128, memory: 0xde002000
Oct 15 15:24:38 Blackened kernel: DVB: registering new adapter (bttv0).
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Recognise
[DST-03T]
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Unsupported
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Unsupported
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: [DST-03T]
has a [MB 86A15]
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: [DST-03T]
has a [MB 86A15]
Oct 15 15:24:38 Blackened kernel: DST type flags : 0x2 ts204 0x4 symdiv
0x10 firmware version = 2
Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_mac: MAC
Address=[00:08:ca:15:05:00]
Oct 15 15:24:38 Blackened kernel: DVB: registering frontend 0 (DST DVB-S)...

Maybe there is a special order in which to load the modules, but I think
I must have tried every
possible combination.
>>
>
>
>   



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux