Marius van den Beek wrote: > Marius van den Beek wrote: >> Manu Abraham wrote: >> >>> Marius van den Beek wrote: >>> >>> >>>> Hello >>>> >>>> I have been trying to get my Twinhan Card VP-1022A to work with >>>> the dvb-drivers of kernel 2.6.18 and/or the latest hg-snapshot. >>>> >From what I read I thought the cad was supported, but when I load >>>> the modules I get a a directory /dev/dvb/adapter0 wit demux0 dvr0 and net0, >>>> but frontend0 seems to be missing. The dmesg output with bttv cardis >>>> card with=113 and verbose=4 is as follows: >>>> >>>> Linux video capture interface: v2.00 >>>> bttv: driver version 0.9.16 loaded >>>> bttv: using 8 buffers with 2080k (520 pages) each for capture >>>> bttv: Host bridge needs ETBF enabled. >>>> bttv: Bt8xx card found (0). >>>> PCI: setting IRQ 10 as level-triggered >>>> PCI: Found IRQ 10 for device 0000:00:0f.0 >>>> PCI: Sharing IRQ 10 with 0000:00:0f.1 >>>> bttv0: Bt878 (rev 17) at 0000:00:0f.0, irq: 10, latency: 128, mmio: >>>> 0xde001000 >>>> bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is >>>> 1822:0001 >>>> bttv0: using: Twinhan DST + clones [card=113,insmod option] >>>> bttv0: enabling ETBF (430FX/VP3 compatibilty) >>>> bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init] >>>> bttv0: using tuner=4 >>>> bttv0: add subdevice "dvb0" >>>> bt878: AUDIO driver version 0.0.0 loaded >>>> bt878: Bt878 AUDIO function found (0). >>>> PCI: Found IRQ 10 for device 0000:00:0f.1 >>>> PCI: Sharing IRQ 10 with 0000:00:0f.0 >>>> bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions. >>>> bt878(0): Bt878 (rev 17) at 00:0f.1, irq: 10, latency: 128, memory: >>>> 0xde002000 >>>> DVB: registering new adapter (bttv0). >>>> dst(0) dst_comm_init: Initializing DST. >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] >>>> dst(0) rdc_reset_state: Resetting state machine >>>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] >>>> dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] >>>> writing [ 00 06 00 00 00 00 00 fa ] >>>> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) >>>> >>>> >>> Looks like an I2C communication error. >>> >>> >>> >>> >>>> dst(0) dst_error_recovery: Trying to return from previous errors. >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] >>>> dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00) >>>> dst(0) dst_error_recovery: Trying to return from previous errors. >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] >>>> dst(0) write_dst: RDC 8820 RESET >>>> dst(0) dst_error_bailout: Trying to bailout from previous error. >>>> dst(0) rdc_8820_reset: Resetting DST >>>> dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] >>>> dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] >>>> dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] >>>> dst(0) dst_probe: unknown device. >>>> frontend_init: Could not find a Twinhan DST. >>>> dvb-bt8xx: A frontend driver was not found for device 109e/0878 >>>> subsystem 1822/0001 >>>> >>>> >>> >>> >>>> I am running gentoo on a pentium3 system. >>>> I hope someone can help me solve this problem. >>>> >>>> >>> Is this happening on 2.6.18 only or on others as well ? >>> >>> >>> >> It happens on 2.6.12.6 as well. But I tried the mantis driver today and >> got a frontend0 device, >> but after rebooting I was not able to reproduce it. Very strange. >> > I found the syslog entry for it: > Oct 15 15:24:15 Blackened kernel: Linux video capture interface: v2.00 > Oct 15 15:24:15 Blackened kernel: bttv: driver version 0.9.16 loaded > Oct 15 15:24:15 Blackened kernel: bttv: using 8 buffers with 2080k (520 > pages) each for capture > Oct 15 15:24:15 Blackened kernel: bttv: Host bridge needs ETBF enabled. > Oct 15 15:24:15 Blackened kernel: bttv: Bt8xx card found (0). > Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt Link [LNKB] > enabled at IRQ 10 > Oct 15 15:24:15 Blackened kernel: PCI: setting IRQ 10 as level-triggered > Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> > Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 > Oct 15 15:24:15 Blackened kernel: bttv0: Bt878 (rev 17) at 0000:00:0f.0, > irq: 10, latency: 128, mmio: 0xde001000 > Oct 15 15:24:15 Blackened kernel: bttv0: detected: Twinhan VisionPlus > DVB [card=113], PCI subsystem ID is 1822:0001 > Oct 15 15:24:15 Blackened kernel: bttv0: using: Twinhan DST + clones > [card=113,autodetected] > Oct 15 15:24:15 Blackened kernel: bttv0: enabling ETBF (430FX/VP3 > compatibilty) > Oct 15 15:24:15 Blackened kernel: bttv0: gpio: en=00000000, out=00000000 > in=00f500ff [init] > Oct 15 15:24:15 Blackened kernel: bttv0: using tuner=4 > Oct 15 15:24:15 Blackened kernel: bttv0: add subdevice "dvb0" > Oct 15 15:24:15 Blackened kernel: bt878: AUDIO driver version 0.0.0 loaded > Oct 15 15:24:15 Blackened kernel: bt878: Bt878 AUDIO function found (0). > Oct 15 15:24:15 Blackened kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> > Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 > Oct 15 15:24:15 Blackened kernel: bt878_probe: card id=[0x11822],[ > Twinhan VisionPlus DVB ] has DVB functions. > Oct 15 15:24:15 Blackened kernel: bt878(0): Bt878 (rev 17) at 00:0f.1, > irq: 10, latency: 128, memory: 0xde002000 > Oct 15 15:24:38 Blackened kernel: DVB: registering new adapter (bttv0). > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Recognise > [DST-03T] > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Unsupported > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: Unsupported > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: [DST-03T] > has a [MB 86A15] > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_device_id: [DST-03T] > has a [MB 86A15] > Oct 15 15:24:38 Blackened kernel: DST type flags : 0x2 ts204 0x4 symdiv > 0x10 firmware version = 2 > Oct 15 15:24:38 Blackened kernel: dst(0) dst_get_mac: MAC > Address=[00:08:ca:15:05:00] > Oct 15 15:24:38 Blackened kernel: DVB: registering frontend 0 (DST DVB-S)... > > Maybe there is a special order in which to load the modules, but I think > I must have tried every > possible combination. bttv bt878 dst dvb_bt8xx a simple modprobe dvb_bt8xx should help in most cases. Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
