El vie, 06-10-2006 a las 01:15 +0200, Hartmut Hackmann escribió: > Hi, all > > First: thanks for testing. > > To sum up: > Things seem to work, right? > Just some comments: > - It should not be necessary to set card and tuner type manually. > - If no dvb devices are created, the reason most probably is that > the saa7134-dvb module is not loaded. This still needs to be done > separately. > - This card needs the external firmware. > - If you don't have an internal sound cable, you will need to load > the saa7134-oss or the saa7134-alsa module and route the sound > in user space as described in the wiki. This does *not* hold for > dvb-t. > - The digital sound processing uses a sample rate of 32kHz, that's > right. > - The card might have a sensitivity issue. The reason is that there > is an external RF amplifier on the board which is not handled by > the driver yet. > > Can i check the patch in? I think so. > Best regards > Hartmut > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
