Hi, all First: thanks for testing. To sum up: Things seem to work, right? Just some comments: - It should not be necessary to set card and tuner type manually. - If no dvb devices are created, the reason most probably is that the saa7134-dvb module is not loaded. This still needs to be done separately. - This card needs the external firmware. - If you don't have an internal sound cable, you will need to load the saa7134-oss or the saa7134-alsa module and route the sound in user space as described in the wiki. This does *not* hold for dvb-t. - The digital sound processing uses a sample rate of 32kHz, that's right. - The card might have a sensitivity issue. The reason is that there is an external RF amplifier on the board which is not handled by the driver yet. Can i check the patch in? Best regards Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
