[linux-dvb] DBV on the Lifeview Trio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nico Sabbi wrote:

>
> To sum it all up attached is the patch that I'm using.
> Currently there are 3 problems:
> - VHF doesn't tune, although signal strength is high


small correction: if I set FEC_AUTO I can tune both VHF frequencies 
available here

> - frequencies 794 and 802 don't tune (many above and below do tune),
> signal strength is high.
> I noticed that  these 2 frequencies are handled by this entry in 
> tda827xa_dvbt:
> { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
> is it possible that there's an error in it?
> - radio: some stations can be found, but even though I played with the 
> mixer (using kmix)
> I can't hear anything.
>




[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux