Manu Abraham wrote: > Philip Prindeville wrote: > >> >> Here's my logs, but as I said, I had to run the "modprobe bttv0" by >> hand... >> >> Oct 29 18:17:47 tuner kernel: IrDA: Registered device irda0 (via-ircc) >> Oct 29 18:17:47 tuner kernel: Linux video capture interface: v1.00 >> Oct 29 18:17:47 tuner kernel: cx2388x dvb driver version 0.0.4 loaded >> Oct 29 18:17:47 tuner kernel: cx88[0]: subsystem: 7063:3000, board: >> pcHDTV HD3000 HDTV [card=22,autodetected] >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt Link [LNKB] enabled >> at IRQ 12 >> Oct 29 18:17:47 tuner kernel: PCI: setting IRQ 12 as level-triggered >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt 0000:00:14.2[A] -> >> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 >> Oct 29 18:17:47 tuner kernel: cx88[0]/2: found at 0000:00:14.2, rev: >> 5, irq: 12, latency: 32, mmio: 0xdf000000 >> Oct 29 18:17:47 tuner kernel: cx88[0]/2: cx2388x based dvb card > > > > You have the frontend for the cx88 .. > >> Oct 29 18:17:47 tuner kernel: DVB: registering new adapter (cx88[0]). >> Oct 29 18:17:47 tuner kernel: DVB: registering frontend 0 (pcHDTV >> HD3000 HDTV)... >> Oct 29 18:17:47 tuner kernel: cx2388x v4l2 driver version 0.0.4 loaded >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> >> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 >> Oct 29 18:17:47 tuner kernel: cx88[0]/0: found at 0000:00:14.0, rev: >> 5, irq: 12, latency: 32, mmio: 0xde000000 >> Oct 29 18:17:47 tuner kernel: tuner 0-0061: chip found @ 0xc2 (cx88[0]) >> Oct 29 18:17:47 tuner kernel: tuner 0-0061: type set to 52 (Thomson >> DDT 7610 (ATSC/NTSC)) >> Oct 29 18:17:47 tuner kernel: cx88[0]/0: registered device video0 [v4l2] >> Oct 29 18:17:47 tuner kernel: cx88[0]/0: registered device vbi0 >> Oct 29 18:17:47 tuner kernel: cx88[0]/0: registered device radio0 >> Oct 29 18:17:47 tuner kernel: bttv: driver version 0.9.15 loaded >> Oct 29 18:17:47 tuner kernel: bttv: using 8 buffers with 2080k (520 >> pages) each for capture >> Oct 29 18:17:47 tuner kernel: bttv: Bt8xx card found (0). >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> >> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 >> Oct 29 18:17:47 tuner kernel: bttv0: Bt878 (rev 17) at 0000:00:13.0, >> irq: 10, latency: 32, mmio: 0xe0001000 >> Oct 29 18:17:47 tuner kernel: bttv0: detected: ChainTech digitop >> DST-1000 DVB-S [card=113], PCI subsystem ID is 270f:fc00 >> Oct 29 18:17:47 tuner kernel: bttv0: using: Twinhan DST + clones >> [card=113,autodetected] >> Oct 29 18:17:47 tuner kernel: bttv0: using tuner=4 >> Oct 29 18:17:47 tuner kernel: bttv0: add subdevice "dvb0" >> Oct 29 18:17:47 tuner kernel: bt878: no version for "struct_module" >> found: kernel tainted. >> Oct 29 18:17:47 tuner kernel: bt878: AUDIO driver version 0.0.0 loaded >> Oct 29 18:17:47 tuner kernel: bt878: Bt878 AUDIO function found (0). >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> >> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 >> Oct 29 18:17:47 tuner kernel: bt878(0): Bt878 (rev 17) at 00:13.1, >> irq: 10, latency: 32, memory: 0xe0002000 >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt Link [LNKD] enabled >> at IRQ 7 >> Oct 29 18:17:47 tuner kernel: PCI: setting IRQ 7 as level-triggered >> Oct 29 18:17:47 tuner kernel: ACPI: PCI Interrupt 0000:00:10.3[D] -> >> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 >> ... >> Oct 29 19:20:29 tuner kernel: or51132: Waiting for firmware >> upload(dvb-fe-or51132-vsb.fw)... >> Oct 29 19:20:39 tuner kernel: or51132: Version: 10001134-19430000 >> (113-4-194-3) >> Oct 29 19:20:39 tuner kernel: or51132: Firmware upload complete. >> Oct 29 19:21:17 tuner kernel: DVB: registering new adapter (bttv0). >> Oct 29 19:21:17 tuner kernel: dst_get_device_id: Recognise [DST-03T] >> Oct 29 19:21:17 tuner kernel: DST type : satellite >> Oct 29 19:21:17 tuner kernel: DST type flags : 0x2 ts204 0x4 symdiv >> 0x10 firmware version = 2 >> Oct 29 19:21:17 tuner kernel: DVB: registering frontend 1 (DST DVB-S)... >> > > You have the dst too .. > >> >> Any more suggestions? >> > > Now what's the problem.. ? > > Manu > Well, it's not installing "dst" on reboot. I have to do "modprobe bttv0" and "modprobe bttv1" by hand... -Philip
