Hi. I'm using two cards in a box (using a passive riser card). I'm seeing the following logging: IrDA: Registered device irda0 (via-ircc) Linux video capture interface: v1.00 cx2388x v4l2 driver version 0.0.4 loaded ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] tuner 0-0061: chip found @ 0xc2 (cx88[0]) tuner 0-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) cx88[0]/0: found at 0000:00:14.0, rev: 5, irq: 12, latency: 32, mmio: 0xde000000cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx2388x dvb driver version 0.0.4 loaded ACPI: PCI Interrupt 0000:00:14.2[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 cx88[0]/2: found at 0000:00:14.2, rev: 5, irq: 12, latency: 32, mmio: 0xdf000000cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (pcHDTV HD3000 HDTV)... bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 bttv0: Bt878 (rev 17) at 0000:00:13.0, irq: 10, latency: 32, mmio: 0xe0001000 bttv0: detected: ChainTech digitop DST-1000 DVB-S [card=113], PCI subsystem ID is 270f:fc00 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 bt878(0): Bt878 (rev 17) at 00:13.1, irq: 10, latency: 32, memory: 0xe0002000 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7 And lspci reports: 00:13.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 00:13.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 00:14.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05) 00:14.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05) The relevant portion of my /etc/modprobe.conf file looks like: # DVB stuff alias char-major-81 cx88-dvb alias char-major-81-0 cx8800 alias char-major-81-1 bttv options dvb_core dvb_shutdown_timeout=0 options bttv i2c_hw=1 card=0x71 install bt878 /sbin/modprobe --ignore-install bt878 install dst /sbin/modprobe --ignore-install dst install dvb_bt8xx /sbin/modprobe --ignore-install dvb_bt8xx install cx88-atsc /sbin/modprobe cx8800;/sbin/modprobe --ignore-install cx88-atsc install cx88-dvb /sbin/modprobe cx8800;/sbin/modprobe --ignore-install cx88-dvb install btcx-risc /sbin/modprobe tuner;/sbin/modprobe --ignore-install btcx-risc What am I overlooking? I'm not seeing the second frontend device being registered... Thanks, -Philip
