Hi, After installing my new DVB-C card (TwinHan Cab-CI), compiling a custom 2.6.14 kernel with DVB support, I get only garbled audio/video from the driver. I have tested on a FTA channel and I have no problem with this channel when using WinXP (on the same machine). I have compiled dvb-apps from CVS and channel scanning and tuning works fine. An example of the garbled output can be found on the following URL: http://bjerkeset.com/DVB/twinhan.mpeg (generated with: dvbstream -o -n 60 -ps -c 0 -qam 64 -v 517 -a 660 > twinhan.mpeg) The output looks similar when played directly with mplayer or xine, e.g # mplayer - < /dev/dvb/adapter0/dvr0 # xine http://bjerkeset.com/DVB/twinhan.mpeg Output from dmesg: ===================================== Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:06.0, irq: 10, latency: 64, mmio: 0xdddfe000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00fb0cfd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). bt878(0): Bt878 (rev 17) at 00:06.1, irq: 10, latency: 64, memory: 0xdddff000 DVB: registering new adapter (bttv0). dst_get_device_id: Recognise [DCT-CI] DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 firmware version = 2 dst_get_mac: MAC Address=[00:08:ca:16:15:00] dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-C)... Does anyone know what can be the cause of a problem like this? I found a thread in the mailinglist archive that suggests it should be possible to get this card working: http://www.linuxtv.org/pipermail/linux-dvb/2005-September/004730.html Thanks in advance for any help Svein Olav Bjerkeset
