Hi Damiano, On Fri, 23 Sep 2005, Damiano ALBANI wrote: > I have an issue with my Artec T1 (AN2235, USB1.1) : it > is *ONLY* recognized by the kernel when in "warm > state" -- that is booting in Windows and then > rebooting to Linux. Syslog says : This is because some (all?) devices are delivered with the default USB IDs of the Cypress USB chip. (That's why the usbtest module is loaded). > And it works nicely with MPlayer, etc. > Whereas, when the device is plugged in as "cold", the > kernel module isn't "triggered" at all. There's only : > > localhost kernel: usb 1-3: new full speed USB device > using ohci_hcd and address 3 > > And that's all. Well, it is recognized, but by the > usbtest module -- which I removed. which kernel are you using? If you are able to, please update to 2.6.13 and use the instructions from here: http://www.linuxtv.org/wiki/index.php/Artec_T1_USB_TV_Box Hope this helps. best regards, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
