Hello, I have an issue with my Artec T1 (AN2235, USB1.1) : it is *ONLY* recognized by the kernel when in "warm state" -- that is booting in Windows and then rebooting to Linux. Syslog says : localhost kernel: drivers/media/dvb/dibusb/dvb-dibusb.c: found a 'Grandtec USB1.1 DVB-T/DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm state. localhost kernel: drivers/media/dvb/dibusb/dvb-dibusb.c: running at FULL speed, will use pid parsing. localhost kernel: drivers/media/dvb/dibusb/dvb-dibusb.c: Grandtec USB1.1 DVB-T/DiBcom USB1.1 DVB-T reference design (MOD3000) successfully initialized and connected. And it works nicely with MPlayer, etc. Whereas, when the device is plugged in as "cold", the kernel module isn't "triggered" at all. There's only : localhost kernel: usb 1-3: new full speed USB device using ohci_hcd and address 3 And that's all. Well, it is recognized, but by the usbtest module -- which I removed. Any idea ? Thanks a lot, -- Damiano ALBANI ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T?l?chargez cette version sur http://fr.messenger.yahoo.com
