> > I'm not sure I saw a lot of documentation. I saw some doco for audigy in > > ld10k1, I guess a lot is applicable on an sblive, but by reading that I > > The init_live script appears to have some naming issues FWIW. > Yes, it seems so. I located it to the line that results in the following output: /usr/local/bin/lo10k1 -n --ctrl "c-Left,Right:Wave Playback Volume,t-Wave Playback Volume:1,c-LeftSurr,RightSurr:Wave Surro und Playback Volume,t-Wave Surround Playback Volume:1,c-Center:Wave Center Playback Volume,t-Wave Center Playback Volume:1,c -LFE:Wave LFE Playback Volume,t-LFE Playback Volume:1" --patch_name "Wave Multi Volume" -a simple.emu10k1 Apparently c- has to do with "concatenating controls", not sure what it means... simple.emu10k1 was loaded when I used this instead: lo10k1 -n --ctrl "" --patch_name "Wave Multi Volume" -a simple.emu10k1 I guess it breaks things... > > can't really relate it to the gui. I've managed to load effects, but I > > I keep getting "not enough tram" or similar when I try to load FX. > Can you clue me on what you did? > I launched ld10k1 with -t 7, it says it initializes tram with 1024k. Whatever that means... > > need to get an idea of how things actually make their way to the output, > > and which things they pass on their way there, to connect them in a sane > > way. I also need to get an idea of how the different things in qlo10k1 > > relate to the controls in alsamixer (I really hope there is _some_ > > relation between them :-). I'll dig along... > > > > AFAICT, you can just drop in the blocks you need and connect 'em up > (context menus for the connections are available if the cursor is hovering > over the line - took me a while to find that), then the controls show up in > the mixer. It crashes kmix when things change but IIRC you get the AC97 > section + whatever you define in alsamixer (or aumix, what have you) > IOW you can apparently define the whole signal path > Alsamixer. I understand you can define the whole signal path, and I can connect/disconnect things but it's not much of a use if I don't know what's going on. I still need to know how it relates to the hardware... Digging along... /Mathias
